Multicarrier CDMA systems with MIMO technology

The rapid demand for broadband wireless access with fast multimedia services initiated a vast research on the development of new wireless systems that will provide high spectral efficiencies and data rates. A potential candidate for future generation wireless systems is multi-carrier code division multiple access (MC-CDMA). To achieve higher user capacities and increase the system data rate, various multiple-input multiple-output (MIMO) technologies such as spatial multiplexing and spatial diversity techniques have been proposed recently and combined with MC-CDMA.This research proposes a chip level coded ordered successive spatial and multiuser interference cancellation (OSSMIC) receiver for downlink MIMO MC-CDMA systems. As the conventional chip level OSIC receiver [1] is unable to overcome multiple access interference (MAI) and performs poorly in multiuser scenarios, the proposed receiver cancels both spatial and multiuser interference by requiring only the knowledge of the desired user's spreading sequence. Simulation results show that the proposed receiver not only performs better than the existing linear detectors [2] but also outperforms both the chip and symbol level OSIC receivers. In this work we also compare the error rate performance between our proposed system and MIMO orthogonal frequency division multiple access (MIMO OFDMA) system and we justify the comparisons with a pairwise error probability (PEP) analysis. MIMO MC-CDMA demonstrates a better performance over MIMO OFDMA under low system loads whereas in high system loads, MIMO OFDMA outperforms MIMO MC-CDMA. However if all users' spreading sequences are used at the desired user receiver, MIMO MC-CDMA performs better than MIMO OFDMA at all system loads.In the second part of this work, user grouping algorithms are proposed to provide power minimisation in grouped MC-CDMA and space-time block code (STBC) MC-CDMA systems. When the allocation is performed without a fair data rate requirement, the optimal solution to the minimisation problem is provided. However when some fairness is considered, the optimal solution requires high computational complexity and hence we solve this problem by proposing two suboptimal algorithms. Simulation results illustrate a significantly reduced power consumption in comparison with other techniques.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Architectures and Algorithms for the Signal Processing of Advanced MIMO Radar Systems

This thesis focuses on the research, development and implementation of novel concepts, architectures, demonstrator systems and algorithms for the signal processing of advanced Multiple Input Multiple Output (MIMO) radar systems. The key concept is to address compact system, which have high resolutions and are able to perform a fast radar signal processing, three-dimensional (3D), and four-dimensional (4D) beamforming for radar image generation and target estimation. The idea is to obtain a complete sensing of range, Azimuth and elevation (additionally Doppler as the fourth dimension) from the targets in the radar captures. The radar technology investigated, aims at addressing sev- eral civil and military applications, such as surveillance and detection of targets, both air and ground based, and situational awareness, both in cars and in flying platforms, from helicopters, to Unmanned Aerial Vehicles (UAV) and air-taxis. Several major topics have been targeted. The development of complete systems and innovative FPGA, ARM and software based digital architectures for 3D imaging MIMO radars, which operate in both Time Division Multiplexing (TDM) and Frequency Divi- sion Multiplexing (FDM) modes, with Frequency Modulated Continuous Wave (FMCW) and Orthogonal Frequency Division Multiplexing (OFDM) signals, respectively. The de- velopment of real-time radar signal processing, beamforming and Direction-Of-Arrival (DOA) algorithms for target detection, with particular focus on FFT based, hardware implementable techniques. The study and implementation of advanced system concepts, parametrisation and simulation of next generation real-time digital radars (e.g. OFDM based). The design and development of novel constant envelope orthogonal waveforms for real-time 3D OFDM MIMO radar systems. The MIMO architectures presented in this thesis are a collection of system concepts, de- sign and simulations, as well as complete radar demonstrators systems, with indoor and outdoor measurements. Several of the results shown, come in the form of radar images which have been captured in field-test, in different scenarios, which aid in showing the proper functionality of the systems. The research activities for this thesis, have been carried out on the premises of Air- bus, based in Munich (Germany), as part of a Ph.D. candidate joint program between Airbus and the Polytechnic Department of Engineering and Architecture (Dipartimento Politecnico di Ingegneria e Architettura), of the University of Udine, based in Udine (Italy).Questa tesi si concentra sulla ricerca, lo sviluppo e l\u2019implementazione di nuovi concetti, architetture, sistemi dimostrativi e algoritmi per l\u2019elaborazione dei segnali in sistemi radar avanzati, basati su tecnologia Multiple Input Multiple Output (MIMO). Il con- cetto chiave `e quello di ottenere sistemi compatti, dalle elevate risoluzioni e in grado di eseguire un\u2019elaborazione del segnale radar veloce, un beam-forming tri-dimensionale (3D) e quadri-dimensionale (4D) per la generazione di immagini radar e la stima delle informazioni dei bersagli, detti target. L\u2019idea `e di ottenere una stima completa, che includa la distanza, l\u2019Azimuth e l\u2019elevazione (addizionalmente Doppler come quarta di- mensione) dai target nelle acquisizioni radar. La tecnologia radar indagata ha lo scopo di affrontare diverse applicazioni civili e militari, come la sorveglianza e la rilevazione di targets, sia a livello aereo che a terra, e la consapevolezza situazionale, sia nelle auto che nelle piattaforme di volo, dagli elicotteri, ai Unmanned Aerial Vehicels (UAV) e taxi volanti (air-taxis). Le tematiche affrontante sono molte. Lo sviluppo di sistemi completi e di architetture digitali innovative, basate su tecnologia FPGA, ARM e software, per radar 3D MIMO, che operano in modalit`a Multiplexing Time Division Multiplexing (TDM) e Multiplexing Frequency Diversion (FDM), con segnali di tipo FMCW (Frequency Modulated Contin- uous Wave) e Orthogonal Frequency Division Multiplexing (OFDM), rispettivamente. Lo sviluppo di tecniche di elaborazione del segnale radar in tempo reale, algoritmi di beam-forming e di stima della direzione di arrivo, Direction-Of-Arrival (DOA), dei seg- nali radar, per il rilevamento dei target, con particolare attenzione a processi basati su trasformate di Fourier (FFT). Lo studio e l\u2019implementazione di concetti di sistema avan- zati, parametrizzazione e simulazione di radar digitali di prossima generazione, capaci di operare in tempo reale (ad esempio basati su architetture OFDM). Progettazione e sviluppo di nuove forme d\u2019onda ortogonali ad inviluppo costante per sistemi radar 3D di tipo OFDM MIMO, operanti in tempo reale. Le attivit`a di ricerca di questa tesi sono state svolte presso la compagnia Airbus, con sede a Monaco di Baviera (Germania), nell\u2019ambito di un programma di dottorato, svoltosi in maniera congiunta tra Airbus ed il Dipartimento Politecnico di Ingegneria e Architettura dell\u2019Universit`a di Udine, con sede a Udine

Adaptive Communications for Next Generation Broadband Wireless Access Systems

Un dels aspectes claus en el disseny i gestió de les xarxes sense fils d'accés de banda ampla és l'ús eficient dels recursos radio. Des del punt de vista de l'operador, l'ample de banda és un bé escàs i preuat que s´ha d'explotar i gestionar de la forma més eficient possible tot garantint la qualitat del servei que es vol proporcionar. Per altra banda, des del punt de vista del usuari, la qualitat del servei ofert ha de ser comparable al de les xarxes fixes, requerint així un baix retard i una baixa pèrdua de paquets per cadascun dels fluxos de dades entre la xarxa i l'usuari. Durant els darrers anys s´han desenvolupat nombroses tècniques i algoritmes amb l'objectiu d'incrementar l'eficiència espectral. Entre aquestes tècniques destaca l'ús de múltiples antenes al transmissor i al receptor amb l'objectiu de transmetre diferents fluxos de dades simultaneament sense necessitat d'augmentar l'ample de banda. Per altra banda, la optimizació conjunta de la capa d'accés al medi i la capa física (fent ús de l'estat del canal per tal de gestionar de manera optima els recursos) també permet incrementar sensiblement l'eficiència espectral del sistema.L'objectiu d'aquesta tesi és l'estudi i desenvolupament de noves tècniques d'adaptació de l'enllaç i gestió dels recursos ràdio aplicades sobre sistemes d'accés ràdio de propera generació (Beyond 3G). Els estudis realitzats parteixen de la premissa que el transmisor coneix (parcialment) l'estat del canal i que la transmissió es realitza fent servir un esquema multiportadora amb múltiples antenes al transmisor i al receptor. En aquesta tesi es presenten dues línies d'investigació, la primera per casos d'una sola antenna a cada banda de l'enllaç, i la segona en cas de múltiples antenes. En el cas d'una sola antena al transmissor i al receptor, un nou esquema d'assignació de recursos ràdio i priorització dels paquets (scheduling) és proposat i analitzat integrant totes dues funcions sobre una mateixa entitat (cross-layer). L'esquema proposat té com a principal característica la seva baixa complexitat i que permet operar amb transmissions multimedia. Alhora, posteriors millores realitzades per l'autor sobre l'esquema proposat han permès també reduir els requeriments de senyalització i combinar de forma óptima usuaris d'alta i baixa mobilitat sobre el mateix accés ràdio, millorant encara més l'eficiència espectral del sistema. En cas d'enllaços amb múltiples antenes es proposa un nou esquema que combina la selecció del conjunt optim d'antenes transmissores amb la selecció de la codificació espai- (frequència-) temps. Finalment es donen una sèrie de recomanacions per tal de combinar totes dues línies d'investigació, així con un estat de l'art de les tècniques proposades per altres autors que combinen en part la gestió dels recursos ràdio i els esquemes de transmissió amb múltiples antenes.Uno de los aspectos claves en el diseño y gestión de las redes inalámbricas de banda ancha es el uso eficiente de los recursos radio. Desde el punto de vista del operador, el ancho de banda es un bien escaso y valioso que se debe explotar y gestionar de la forma más eficiente posible sin afectar a la calidad del servicio ofrecido. Por otro lado, desde el punto de vista del usuario, la calidad del servicio ha de ser comparable al ofrecido por las redes fijas, requiriendo así un bajo retardo y una baja tasa de perdida de paquetes para cada uno de los flujos de datos entre la red y el usuario. Durante los últimos años el número de técnicas y algoritmos que tratan de incrementar la eficiencia espectral en dichas redes es bastante amplio. Entre estas técnicas destaca el uso de múltiples antenas en el transmisor y en el receptor con el objetivo de poder transmitir simultáneamente diferentes flujos de datos sin necesidad de incrementar el ancho de banda. Por otro lado, la optimización conjunta de la capa de acceso al medio y la capa física (utilizando información de estado del canal para gestionar de manera óptima los recursos) también permite incrementar sensiblemente la eficiencia espectral del sistema.El objetivo de esta tesis es el estudio y desarrollo de nuevas técnicas de adaptación del enlace y la gestión de los recursos radio, y su posterior aplicación sobre los sistemas de acceso radio de próxima generación (Beyond 3G). Los estudios realizados parten de la premisa de que el transmisor conoce (parcialmente) el estado del canal a la vez que se considera que la transmisión se realiza sobre un sistema de transmisión multiportadora con múltiple antenas en el transmisor y el receptor. La tesis se centra sobre dos líneas de investigación, la primera para casos de una única antena en cada lado del enlace, y la segunda en caso de múltiples antenas en cada lado. Para el caso de una única antena en el transmisor y en el receptor, se ha desarrollado un nuevo esquema de asignación de los recursos radio así como de priorización de los paquetes de datos (scheduling) integrando ambas funciones sobre una misma entidad (cross-layer). El esquema propuesto tiene como principal característica su bajo coste computacional a la vez que se puede aplicar en caso de transmisiones multimedia. Posteriores mejoras realizadas por el autor sobre el esquema propuesto han permitido también reducir los requisitos de señalización así como combinar de forma óptima usuarios de alta y baja movilidad. Por otro lado, en caso de enlaces con múltiples antenas en transmisión y recepción, se presenta un nuevo esquema de adaptación en el cual se combina la selección de la(s) antena(s) transmisora(s) con la selección del esquema de codificación espacio-(frecuencia-) tiempo. Para finalizar, se dan una serie de recomendaciones con el objetivo de combinar ambas líneas de investigación, así como un estado del arte de las técnicas propuestas por otros autores que combinan en parte la gestión de los recursos radio y los esquemas de transmisión con múltiples antenas.In Broadband Wireless Access systems the efficient use of the resources is crucial from many points of views. From the operator point of view, the bandwidth is a scarce, valuable, and expensive resource which must be exploited in an efficient manner while the Quality of Service (QoS) provided to the users is guaranteed. On the other hand, a tight delay and link quality constraints are imposed on each data flow hence the user experiences the same quality as in fixed networks. During the last few years many techniques have been developed in order to increase the spectral efficiency and the throughput. Among them, the use of multiple antennas at the transmitter and the receiver (exploiting spatial multiplexing) with the joint optimization of the medium access control layer and the physical layer parameters.In this Ph.D. thesis, different adaptive techniques for B3G multicarrier wireless systems are developed and proposed focusing on the SS-MC-MA and the OFDM(A) (IEEE 802.16a/e/m standards) communication schemes. The research lines emphasize into the adaptation of the transmission having (Partial) knowledge of the Channel State Information for both; single antenna and multiple antenna links. For single antenna links, the implementation of a joint resource allocation and scheduling strategy by including adaptive modulation and coding is investigated. A low complexity resource allocation and scheduling algorithm is proposed with the objective to cope with real- and/or non-real- time requirements and constraints. A special attention is also devoted in reducing the required signalling. However, for multiple antenna links, the performance of a proposed adaptive transmit antenna selection scheme jointly with space-time block coding selection is investigated and compared with conventional structures. In this research line, mainly two optimizations criteria are proposed for spatial link adaptation, one based on the minimum error rate for fixed throughput, and the second focused on the maximisation of the rate for fixed error rate. Finally, some indications are given on how to include the spatial adaptation into the investigated and proposed resource allocation and scheduling process developed for single antenna transmission

Architectures multi-Asip pour turbo récepteur flexible

Rapidly evolving wireless standards use modern techniques such as turbo codes, Bit Interleaved coded Modulation (BICM), high order QAM constellation, Signal Space Diversity (SSD), Multi-Input Multi-Output (MIMO) Spatial Multiplexing (SM) and Space Time Codes (STC) with different parameters for reliable high rate data transmissions. Adoption of such techniques in the transmitter can impact the receiver architecture in three ways: (1) the complex processing related to advanced techniques such as turbo codes, encourage to perform iterative processing in the receiver to improve error rate performance (2) to satisfy high throughput requirement for an iterative receiver, parallel processing is mandatory and finally (3) to allow the support of different techniques and parameters imposed, programmable yet high throughput hardware processing elements are required. In this thesis, to address the high throughput requirement with turbo processing, first of all a study of parallelism on turbo decoding is extended for turbo demodulation and turbo equalization. Based on the results acquired from the parallelism study a flexible high throughput heterogeneous multi-ASIP NoC based unified turbo receiver is proposed. The proposed architecture fulfils the target requirements in a way that: (a) Application Specific Instruction-set Processor (ASIP) exploits metric generation level parallelism and implements the required flexibility, (b) throughputs beyond the capacity of single ASIP in a turbo process are achieved through multiple ASIP elements implementing sub-block parallelism and shuffled processing and finally (c) Network on Chip is used to handle communication conflicts during parallel processing of multiple ASIPs. In pursuit to achieve a hardware model of the proposed architecture two ASIPs are conceived where the first one, namely EquASIP, is dedicated for MMSE-IC equalization and provides a flexible solution for multiple MIMO techniques adopted in multiple wireless standards with a capability to work in turbo equalization context. The second ASIP, named as DemASIP, is a flexible demapper which can be used in MIMO or single antenna environment for any modulation till 256-QAM with or without iterative demodulation. Using available TurbASIP and NoC components, the thesis concludes on an FPGA prototype of heterogeneous multi-ASIP NoC based unified turbo receiver which integrates 9 instances of 3 different ASIPs with 2 NoCs.Les normes de communication sans fil, sans cesse en évolution, imposent l'utilisation de techniques modernes telles que les turbocodes, modulation codée à entrelacement bit (BICM), constellation MAQ d'ordre élevé, diversité de constellation (SSD), multiplexage spatial et codage espace-temps multi-antennes (MIMO) avec des paramètres différents pour des transmissions fiables et de haut débit. L'adoption de ces techniques dans l'émetteur peut influencer l'architecture du récepteur de trois façons: (1) les traitement complexes relatifs aux techniques avancées comme les turbocodes, encourage à effectuer un traitement itératif dans le récepteur pour améliorer la performance en termes de taux d'erreur (2) pour satisfaire l'exigence de haut débit avec un récepteur itératif, le recours au parallélisme est obligatoire et enfin (3) pour assurer le support des différentes techniques et paramètres imposées, des processeurs de traitement matériel flexibles, mais aussi de haute performance, sont nécessaires. Dans cette thèse, pour répondre aux besoins de haut débit dans un contexte de traitement itératif, tout d'abord une étude de parallélisme sur le turbo décodage a été étendue aux applications de turbo démodulation et turbo égalisation. Partant des résultats obtenus à partir de l'étude du parallélisme, un récepteur itératif unifié basé sur un modèle d'architecture multi-ASIP hétérogène intégrant un réseau sur puce (NoC) a été proposé. L'architecture proposée répond aux exigences visées d'une manière où: (a) le concept de processeur à jeu d'instruction dédié à l'application (ASIP) exploite le parallélisme du niveau de génération de métriques et met en oeuvre la flexibilité nécessaire, (b) les débits au-delà de la capacité d'un seul ASIP dans un processus itératif sont obtenus au moyen de multiples ASIP implémentant le parallélisme de sous-blocs et le traitement combiné et enfin (c) le concept de réseau sur puce (NoC) est utilisé pour gérer les conflits de communication au cours du traitement parallèle itératif multi-ASIP. Dans le but de parvenir à un modèle matériel de l'architecture proposée, deux ASIP ont été conçus où le premier, nommé EquASIP, est dédié à l'égalisation MMSE-IC et fournit une solution flexible pour de multiples techniques multi-antennes adoptés dans plusieurs normes sans fil avec la capacité de travailler dans un contexte de turbo égalisation. Le deuxième ASIP, nommé DemASIP, est un démappeur flexible qui peut être utilisé dans un environnement multi-antennes et pour tout type de modulation jusqu'à MAQ-256 avec ou sans démodulation itérative. En intégrant ces ASIP, en plus des NoC et TurbASIP disponibles à Télécom Bretagne, la thèse conclut sur un prototype FPGA d'un récepteur itératif unifié multi-ASIP qui intègre 9 coeurs de 3 différents types d'ASIP avec 2 NoC

Novel multiple antenna techniques for improved diversity in wireless communication systems

The focus of this thesis is to enhance the performance of wireless communication systems through the exploitation of multiple antennas at both the transmitter and the receiver ends of a communication link. Such a multiple-input multiple-output (MIMO) connection can theoretically provide spatially independent channels which can be exploited to provide diversity gain and thereby mitigate the problem of channel fading. To integrate such MIMO technology with emerging wireless systems such as third generation code division multiple access (CDMA) and fourth generation orthogonal division multiple access (OFDMA) based-approaches novel advanced signal processing techniques are required. The major advantages of MIMO systems, including array, diversity and multiplexing gains, are initially reviewed. Diversity gain is identified as the key property, which leverages the spatial independent channels to increase the robustness of the communication link. The family of space-time block codes is then introduced as a low computational complexity scheme to benefit from diversity gain within wireless systems. In particular, extended-orthogonal and quasi-orthogonal space-time block codes (EO-/QO-STBCs) are introduced for systems with four transmit antennas which can operate either in open or closed-loop forms. New EO-STBC and QO-STBC wideband CDMA transmission schemes are proposed which when operating in closed-loop mode, i.e. channel state information is exploited at the transmitter, is shown to attain full diversity and thereby outperform previous schemes in terms of attain able symbol error rate performance. This advantage is then utilized in MIMO-OFDM transmission schemes and similar frame error rate (FER) performance advantage is attained. Finally, to mitigate multiuser interference within the proposed MIMO-OFDM system a novel two-step combined parallel interference canceller and multiuser detection scheme is proposed. Simulation studies based upon FER confirm the efficacy of the technique