Estimativa da umidade do solo por refletometria GNSS : uma revisão conceitual

Soil moisture monitoring enables efficient management and use of water resources, having great importance for several purposes, such as: monitoring of risk areas; delimitation of areas susceptible to flooding; geotechnical activities; and in agriculture development. GNSS Reflectometry (GNSS-R) is a scientific and technological development that allows one to perform proximal or remote sensing, depending on the antenna height concerning the surface, by means of navigation satellites. This method exploits GNSS signals indirectly reaching a receiver antenna after they are reflected on the surrounding surfaces. In this method, direct and indirect GNSS signals that reach the receiving antenna are exploited, after reflection on the surfaces existing around the antenna. The combination of these two signals causes the multipath effect, which affects GNSS observable and deteriorates positioning. On the other hand, when interacting with these reflecting surfaces one can estimate their properties. One of the main advantages of GNSS-R, when compared with the conventional methods, is the intermediate coverage area, as well as, the use of the well-defined structure of GNSS systems that guarantee appropriate temporal resolution. The scope of this paper is to present a conceptual review of GNSS-R applied to soil moisture monitoring.O monitoramento da umidade do solo possibilita o manejo e uso eficiente de recursos hídricos, sendo uma atividade importante em diversas áreas, tais como: no monitoramento de áreas de risco; delimitação de áreas suscetíveis a enchentes; atividades da geotecnia; e na agricultura. A Refletometria GNSS (GNSS-R) é um desenvolvimento científico e tecnológico que permite realizar sensoriamento remoto ou proximal, a depender da altura da antena em relação à superfície, com satélites de navegação. Neste método, explora-se os sinais GNSS que chegam à antena receptora de maneira direta e indireta, após reflexão nas superfícies existentes no entorno da antena. A combinação destes dois sinais ocasiona o efeito de multicaminho, que afeta as observáveis GNSS e deteriora o posicionamento. Por outro lado, ao interagir com estas superfícies, o sinal indireto permite estimar atributos acerca destas superfícies, como por exemplo a umidade do solo. Uma das principais vantagens em relação aos métodos convencionais reside no fato do GNSS-R proporcionar uma área de abrangência intermediária e o uso da estrutura bem estabelecida dos satélites GNSS, que garantem resolução temporal apropriada. O escopo deste trabalho é apresentar uma revisão conceitual acerca do GNSS-R aplicado no monitoramento da umidade do solo

GNSS-R Soil Moisture Retrieval Based on a XGboost Machine Learning Aided Method: Performance and Validation

Global navigation satellite system (GNSS)-reflectometry is a type of remote sensing technology and can be applied to soil moisture retrieval. Until now, various GNSS-R soil moisture retrieval methods have been reported. However, there still exist some problems due to the complexity of modeling and retrieval process, as well as the extreme uncertainty of the experimental environment and equipment. To investigate the behavior of bistatic GNSS-R soil moisture retrieval process, two ground-truth measurements with dierent soil conditions were carried out and the performance of the input variables was analyzed from the mathematical statistical aspect. Moreover, the feature of XGBoost method was utilized as well. As a recently developed ensemble machine learning method, the XGBoost method just emerged for the classification of remote sensing and geographic data, to investigate the characterization of the input variables in the GNSS-R soil moisture retrieval. It showed a good correlation with the statistical analysis of ground-truth measurements. The variable contributions for the input data can also be seen and evaluated. The study of the paper provides some experimental insights into the behavior of the GNSS-R soil moisture retrieval. It is worthwhile before establishing models and can also help with understanding the underlying GNSS-R phenomena and interpreting data

GNSS Reflectometry for land surface monitoring and buried object detection

Global Navigation Satellite System Reflectometry (GNSS-R) is attracting growing interest nowadays for several remote sensing applications. As a bistatic radar, the transmitter and the receiver are not co-located and in the special case of GNSS-R, the GNSS satellites are acting as transmitters and the receiver can be mounted either in a static position or onboard a aircraft or low orbit satellite. Various information about the surface from where the GNSS signals are reflected or scattered can be extracted by means of reflected signal strength, code delay, carrier phase delay, interference with direct GNSS signals and so on. Possible applications cover soil moisture retrieval, ice topography and thickness detection, snow depth estimation, vegetation coverage, sea state monitoring such as sea wind and surface roughness, sea salinity… In this work, soil moisture retrieval was mostly focused on. Hardware including antennas and receivers was studied and designed. Our first strategy of soil moisture retrieval is to apply a single Left Hand Circular Polarization (LHCP) antenna for reflected signal reception. Therefore multiple types of antennas such as the helix antenna, the patch antenna and several commercial antennas were designed, simulated or tested in the anechoic chamber. Two receiver solutions were used in our group and both of them apply the SiGe GPS frontend. The first solution is a PC based one: the collection and store of the raw incoming reflected GPS signals were done by the NGrab software (designed by NAVSAS Group of Politecnico di Torino) installed in a standard PC. The other solution was developed in our group and it is operated by a single Hackberry board, which consists of power supply, storage subsystem and customized Linux Debian operating system. The light weight and small size enable this compact receiver to perform flight measurement onboard UAVs. Both of the above mentioned receivers only store raw sampled data and no real time signal processing is performed on board. Post processing is done by Matlab program which makes correlations in both time and frequency domain with incoming signals using the local generated GPS C/A code replica. The so-called Delay Doppler Map (DDM) is therefore generated through this correlation. Signal to Noise Ratio (SNR) can be calculated through Delay Waveform (DW) which is extracted from DDM at the Doppler frequency where the correlation peak exists. Received signal power can be obtained knowing the noise power which is given in a standard equation. In order to better plan a static measurement and to georeference specular points on the surface, programs for georeferencing specular points on either Google Maps or an x-y plane centered at the receiver position were developed. Fly dynamics in terms of roll, pitch and yaw influencing the antenna gain due to the variation of incident angles were also studied in order to compensate the gain to the received signal. Two soil moisture retrieval algorithms were derived corresponding to two receiving schemes. The first one is for the receiving of only LHCP reflected signals. In this case, the surface is assumed to be perfectly smooth and the received signal is seen to consist of only coherent component caused by specular reflection. Dielectric constant can be retrieved from the processed SNR. Two measurement campaigns were carried out using this single LHCP system. The first campaign is a flight measurement overflown a big portion of rice fields when most of the fields were flooded. It was a test measurement on the SNR sensitivity to water/no-water surfaces and an attempt of dielectric constant retrieval was also performed. SNR showed good sensitivity to the surface water content and dielectric constant was also checked to be reasonable. The second campaign is in static positions and it includes two experiments. This campaign initially aimed at testing the sensitivity of the compact receiver to different surface moisture. Results of both SNR and retrieved dielectric constant showed to be coherent with the surface moisture changes. The other retrieval algorithm is for the receiving of both LHCP and RHCP reflected signals concurrently. The cross polarization power ratio (LHCP/RHCP) is believed to be independent of surface roughness by several previous studies and this idea was also verified during the deriving process for either specular reflection case (only coherent component) or diffuse scattering condition (incoherent component). For diffuse scattering, three well known models were applied which are the Kirchhoff Approximation in stationary-phase approximation (Kirchhoff Geometrical Optics, KGO), Kirchhoff Approximation in Physical Optics Approximation (KPO) and Small Perturbation Method (SPM). These three models cover different roughness surfaces from very rough (KGO) to slightly rough surfaces (SPM). All the derived results of cross polarization ratio for the three models were verified to be independent of surface properties and depend on only dielectric constant of soil and incident angle. A new application of GNSS-R technique for the possibility of detection of buried objects was firstly investigated by our group. It has the potential use for man-made mines detection in the military field. Two measurement campaigns were carried out and the variation of the SNR level due to the presence of a metallic object was investigated. The first measurement campaign was performed in a static condition on a sandy terrain to check the functionality of the system. And the presence of the metallic object was detected also in the case of wet terrain. In the second measurement campaign, the antenna was moving along a given path and the possibility of detecting the object dimensions was highlighted. The results show the possibility of adopting this technique on board a remotely controlled UAV for metal object and even its dimension detection. A measurement of snow depth attempting to relate it to reflected LHCP SNR is briefly presented and discussed in Chapter 7

Remote Sensing in Land Applications by Using GNSS-Reflectometry

Global navigation satellite system-reflectometry (GNSS-R) as an efficient tool for remote sensing has gained increasing interests in the last two decades, due to its unique characteristics. It uses GNSS signals as sources of opportunity, providing precise, continuous, all-weather, and 24 hours’ detections, which play a key role in many land applications. The fundamental theoretical part of GNSS-R technique is examined at first. Then, GNSS-R methodologies applied in the soil moisture content, vegetation biomass sensing, and altimetry applications are also detailed. One retrieval method uses only RH (right-hand) reflected data. Another retrieval method for soil moisture content (SMC) aimed to calibrate the measurement by using water reflections, based on the bistatic equations with LH (left-hand) reflected and RH direct signals. The other method for SMC retrieval is related to the polarimetric ratio (PR), the ratio of LH/RH reflected signals can reveal the fluctuations of the SMC. Another vital parameter vegetation biomass was observed by using the variation of reflectivity of the LH and RH reflected components. Finally, the C/A code method was used for exploring the possibility to the altimetry estimation. The features of GNSS-R technique made it a promising remote sensing technique in hydrology, climatology carbon cycles, and other potential applications

Modeling and Theoretical Analysis of GNSS-R Soil Moisture Retrieval Based on the Random Forest and Support Vector Machine Learning Approach

Global Navigation Satellite System-Reflectometry (GNSS-R) as a microwave remote sensing technique can retrieve the Earth’s surface parameters using the GNSS reflected signal from the surface. These reflected signals convey the surface features and therefore can be utilized to detect certain physical properties of the reflecting surface such as soil moisture content (SMC). Up to now, a serial of electromagnetic models (e.g., bistatic radar and Fresnel equations, etc.) are employed and solved for SMC retrieval. However, due to the uncertainty of the physical characteristics of the sites, complexity, and nonlinearity of the inversion process, etc., it is still challenging to accurately retrieve the soil moisture. The popular machine learning (ML) methods are flexible and able to handle nonlinear problems. It can dig out and model the complex interactions between input and output and ultimately make good predictions. In this paper, two typical ML methods, specifically, random forest (RF) and support vector machine (SVM), are employed for SMC retrieval from GNSS-R data of self-designed experiments (in situ and airborne). A comprehensive simulated dataset involving different types of soil is constructed firstly to represent the complex interactions between the variables (reflectivity, elevation angle, dielectric constant, and SMC) for the requirement of training ML regression models. Correspondingly, the main task of soil moisture retrieval (regression) is addressed. Specifically, the post-processed data (reflectivity and elevation angle) from sensor acquisitions are used to make predictions by these two adopted ML methods and compared with the commonly used GNSS-R retrieval method (electromagnetic models). The results show that the RF outperforms the SVM method, and it is more suitable for handling the inversion problem. Moreover, the RF regression model built by the comprehensive dataset demonstrates satisfactory accuracy and strong universality, especially when the soil type is not uniform or unknown. Furthermore, the typical task of detecting water/soil (classification) is discussed. The ML algorithms demonstrate a high potential and efficiency in SMC retrieval from GNSS-R data

Sensitivity of TDS-1 GNSS-R reflectivity to soil moisture: global and regional differences and impact of different spatial scales

The potential of Global Navigation Satellite Systems-Reflectometry (GNSS-R) techniques to estimate land surface parameters such as soil moisture (SM) is experimentally studied using 2014-2017 global data from the UK TechDemoSat-1 (TDS-1) mission. The approach is based on the analysis of the sensitivity to SM of different observables extracted from the Delay Doppler Maps (DDM) computed by the Space GNSS Receiver-Remote Sensing Instrument (SGR-ReSI) instrument using the L1 (1575.42 MHz) left-hand circularly-polarized (LHCP) reflected signals emitted by the Global Positioning System (GPS) navigation satellites. The sensitivity of different GNSS-R observables to SM and its dependence on the incidence angle is analyzed. It is found that the sensitivity of the calibrated GNSS-R reflectivity to surface soil moisture is ~ 0.09 dB/% up to 30° incidence angle, and it decreases with increasing incidence angles, although differences are found depending on the spatial scale used for the ground-truth, and the region. The sensitivity to subsurface soil moisture has been also analyzed using a network of subsurface probes and hydrological models, apparently showing some dependence, but so far results are not conclusive. © 2018 by the authors.Peer ReviewedPostprint (published version

Estimation of Significant Wave Height using the features of cygnss Delay Doppler Map

Significant Wave Height (SWH) is a key parameter to characterize waves, which is typically used in sea state monitoring such as wave forecast to ensure ocean navigation safety. Satellite radar altimeter is probably the primary tool to obtain SWH information. However, it cannot be used for large-scale sea state monitoring unless many of theses satellites are deployed. In this article, we aim to study the potential of Global Navigation Satellite System (GNSS)-Reflectometry (GNSS-R) in SWH measurement based on spaceborne Delay-Doppler Maps (DDMs) data. First, 3 observables (i.e., Delay-Doppler Map Average (DDMA), leading edge slope (LES) of normalized integrated delay waveform (NIDW) (LES-NIDW), and trailing edge slope (TES) of NIDW (TES-NIDW) derived from the DDMs are introduced for SWH estimation. Then, an empirical SWH retrieval model is proposed based on three observables. Subsequently, ERA5 SWH is used as reference data to verify the performance of the proposed model. The experimental results show that the Root Mean Square Error (RMSE) and Correlation Coefficient (CC) estimated by SWH of the three observables are better than 0.54 m and 0.88 m, respectively. Among them, the estimation performance based on DDMA observable is the best, with RMSE and CC of 0.49 m and 0.89 m. This study shows the potential of spaceborne GNSS-R in SWH retrieval. © 2022 IEEE.This work was supported by the Grant RYC-2016-20918 financed by MCIN/AEI /10.13039 /501100011033 and by ESF Investing in your future.Peer ReviewedPostprint (published version

Desert roughness retrieval using CYGNSS GNSS-R data

The aim of this paper is to assess the potential use of data recorded by the Global Navigation Satellite System Reflectometry (GNSS-R) Cyclone Global Navigation Satellite System (CYGNSS) constellation to characterize desert surface roughness. The study is applied over the Sahara, the largest non-polar desert in the world. This is based on a spatio-temporal analysis of variations in Cyclone Global Navigation Satellite System (CYGNSS) data, expressed as changes in reflectivity (G). In general, the reflectivity of each type of land surface (reliefs, dunes, etc.) encountered at the studied site is found to have a high temporal stability. A grid of CYGNSS G measurements has been developed, at the relatively fine resolution of 0.03° x 0.03°, and the resulting map of average reflectivity, computed over a 2.5-year period, illustrates the potential of CYGNSS data for the characterization of the main types of desert land surface (dunes, reliefs, etc.). A discussion of the relationship between aerodynamic or geometric roughness and CYGNSS reflectivity is proposed. A high correlation is observed between these roughness parameters and reflectivity. The behaviors of the GNSS-R reflectivity and the Advanced Land Observing Satellite-2 (ALOS-2) Synthetic Aperture Radar (SAR) backscattering coeffcient are compared and found to be strongly correlated. An aerodynamic roughness (Z0) map of the Sahara is proposed, using four distinct classes of terrain roughness

GNSS reflectometry for land remote sensing applications

Soil moisture and vegetation biomass are two essential parameters from a scienti c and economical point of view. On one hand, they are key for the understanding of the hydrological and carbon cycle. On the other hand, soil moisture is essential for agricultural applications and water management, and vegetation biomass is crucial for regional development programs. Several remote sensing techniques have been used to measure these two parameters. However, retrieving soil moisture and vegetation biomass with the required accuracy, and the appropriate spatial and temporal resolutions still remains a major challenge. The use of Global Navigation Satellite Systems (GNSS) reflected signals as sources of opportunity for measuring soil moisture and vegetation biomass is assessed in this PhD Thesis. This technique, commonly known as GNSS-Reflectometry (GNSS-R), has gained increasing interest among the scienti c community during the last two decades due to its unique characteristics. Previous experimental works have already shown the capabilities of GNSS-R to sense small reflectivity changes on the surface. The use of the co- and cross-polarized reflected signals was also proposed to mitigate nuisance parameters, such as soil surface roughness, in the determination of soil moisture. However, experimental evidence of the suitability of that technique could not be demonstrated. This work analyses from a theoretical and an experimental point of view the capabilities of polarimetric observations of GNSS reflected signals for monitoring soil moisture and vegetation biomass. The Thesis is structured in four main parts. The fi rst part examines the fundamental aspects of the technique and provides a detailed review of the GNSS-R state of the art for soil moisture and vegetation monitoring. The second part deals with the scattering models from land surfaces. A comprehensive description of the formation of scattered signals from rough surfaces is provided. Simulations with current state of the art models for bare and vegetated soils were performed in order to analyze the scattering components of GNSS reflected signals. A simpli ed scattering model was also developed in order to relate in a straightforward way experimental measurements to soil bio-geophysical parameters. The third part reviews the experimental work performed within this research. The development of a GNSS-R instrument for land applications is described, together with the three experimental campaigns carried out in the frame of this PhD Thesis. The analysis of the GNSS-R and ground truth data is also discussed within this part. As predicted by models, it was observed that GNSS scattered signals from natural surfaces are a combination of a coherent and an incoherent scattering components. A data analysis technique was proposed to separate both scattering contributions. The use of polarimetric observations for the determination of soil moisture was demonstrated to be useful under most soil conditions. It was also observed that forests with high levels of biomass could be observed with GNSS reflected signals. The fourth and last part of the Thesis provides an analysis of the technology perspectives. A GNSS-R End-to-End simulator was used to determine the capabilities of the technique to observe di erent soil reflectivity conditions from a low Earth orbiting satellite. It was determined that high accuracy in the estimation of reflectivity could be achieved within reasonable on-ground resolution, as the coherent scattering component is expected to be the predominant one in a spaceborne scenario. The results obtained in this PhD Thesis show the promising potential of GNSS-R measurements for land remote sensing applications, which could represent an excellent complementary observation for a wide range of Earth Observation missions such as SMOS, SMAP, and the recently approved ESA Earth Explorer Mission Biomass.La humedad del suelo y la biomasa de la vegetaci on son dos parametros clave desde un punto de vista tanto cient co como econ omico. Por una parte son esenciales para el estudio del ciclo del agua y del carbono. Por otra parte, la humedad del suelo es esencial para la gesti on de las cosechas y los recursos h dricos, mientras que la biomasa es un par ametro fundamental para ciertos programas de desarrollo. Varias formas de teledetección se han utilizado para la observaci on remota de estos par ametros, sin embargo, su monitorizaci on con la precisi on y resoluci on necesarias es todav a un importante reto tecnol ogico. Esta Tesis evalua la capacidad de medir humedad del suelo y biomasa de la vegetaci on con señales de Sistemas Satelitales de Posicionamiento Global (GNSS, en sus siglas en ingl es) reflejadas sobre la Tierra. La t ecnica se conoce como Reflectometr í a GNSS (GNSS-R), la cual ha ganado un creciente inter es dentro de la comunidad científ ca durante las dos ultimas d ecadas. Experimentos previos a este trabajo ya demostraron la capacidad de observar cambios en la reflectividad del terreno con GNSS-R. El uso de la componente copolar y contrapolar de la señal reflejada fue propuesto para independizar la medida de humedad del suelo de otros par ametros como la rugosidad del terreno. Sin embargo, no se pudo demostrar una evidencia experimental de la viabilidad de la t ecnica. En este trabajo se analiza desde un punto de vista te orico y experimental el uso de la informaci on polarim etrica de la señales GNSS reflejadas sobre el suelo para la determinaci on de humedad y biomasa de la vegetaci on. La Tesis se estructura en cuatro partes principales. En la primera parte se eval uan los aspectos fundamentales de la t ecnica y se da una revisi on detallada del estado del arte para la observaci on de humedad y vegetaci on. En la segunda parte se discuten los modelos de dispersi on electromagn etica sobre el suelo. Simulaciones con estos modelos fueron realizadas para analizar las componentes coherente e incoherente de la dispersi on de la señal reflejada sobre distintos tipos de terreno. Durante este trabajo se desarroll o un modelo de reflexi on simpli cado para poder relacionar de forma directa las observaciones con los par ametros geof sicos del suelo. La tercera parte describe las campañas experimentales realizadas durante este trabajo y discute el an alisis y la comparaci on de los datos GNSS-R con las mediciones in-situ. Como se predice por los modelos, se comprob o experimentalmente que la señal reflejada est a formada por una componente coherente y otra incoherente. Una t ecnica de an alisis de datos se propuso para la separacióon de estas dos contribuciones. Con los datos de las campañas experimentales se demonstr o el bene cio del uso de la informaci on polarim etrica en las señales GNSS reflejadas para la medici on de humedad del suelo, para la mayor a de las condiciones de rugosidad observadas. Tambi en se demostr o la capacidad de este tipo de observaciones para medir zonas boscosas densamente pobladas. La cuarta parte de la tesis analiza la capacidad de la t ecnica para observar cambios en la reflectividad del suelo desde un sat elite en orbita baja. Los resultados obtenidos muestran que la reflectividad del terreno podr a medirse con gran precisi on ya que la componente coherente del scattering ser a la predominante en ese tipo de escenarios. En este trabajo de doctorado se muestran la potencialidades de la t ecnica GNSS-R para observar remotamente par ametros del suelo tan importantes como la humedad del suelo y la biomasa de la vegetaci on. Este tipo de medidas pueden complementar un amplio rango de misiones de observaci on de la Tierra como SMOS, SMAP, y Biomass, esta ultima recientemente aprobada para la siguiente misi on Earth Explorer de la ESA

Information retrieval from spaceborne GNSS Reflectometry observations using physics- and learning-based techniques

This dissertation proposes a learning-based, physics-aware soil moisture (SM) retrieval algorithm for NASA’s Cyclone Global Navigation Satellite System (CYGNSS) mission. The proposed methodology has been built upon the literature review, analyses, and findings from a number of published studies throughout the dissertation research. Namely, a Sig- nals of Opportunity Coherent Bistatic scattering model (SCoBi) has been first developed at MSU and then its simulator has been open-sourced. Simulated GNSS-Reflectometry (GNSS-R) analyses have been conducted by using SCoBi. Significant findings have been noted such that (1) Although the dominance of either the coherent reflections or incoher- ent scattering over land is a debate, we demonstrated that coherent reflections are stronger for flat and smooth surfaces covered by low-to-moderate vegetation canopy; (2) The influ- ence of several land geophysical parameters such as SM, vegetation water content (VWC), and surface roughness on the bistatic reflectivity was quantified, the dynamic ranges of reflectivity changes due to SM and VWC are much higher than the changes due to the surface roughness. Such findings of these analyses, combined with a comprehensive lit- erature survey, have led to the present inversion algorithm: Physics- and learning-based retrieval of soil moisture information from space-borne GNSS-R measurements that are taken by NASA’s CYGNSS mission. The study is the first work that proposes a machine learning-based, non-parametric, and non-linear regression algorithm for CYGNSS-based soil moisture estimation. The results over point-scale soil moisture observations demon- strate promising performance for applicability to large scales. Potential future work will be extension of the methodology to global scales by training the model with larger and diverse data sets