Determination of Optimal Power for ZigBee-based Wireless Sensor Networks

In designing WSNs, both the transmit power, network topology, and routing scheme are considered. Transmitting at lower power affect the connectivity of the network while transmitting at excessive power reduces the lifetime of nodes and increases the network interference. Thus, determining the optimal power of the nodes that will be necessary to guarantee network connectivity. In this work, a practical self-healing and self-configuring real life prototype ZigBee Wireless Mesh Sensor Networks (WMSNs) was design to evaluate the performance of IEEE 802.15.4/ZigBee. We showed that increasing the transmit power of nodes from -6dBm to 0dBm in WMSNs leads to improved packets delivery ratio and throughput improvement and the optimal power was -2dBm for the studied topology. The testbed will aid wireless sensor network designer to make an accurate decision on transmit power and mesh network topology using Ad-hoc on-demand distance vector algorithm (AODV) as the routing scheme

Design Aspects of An Energy-Efficient, Lightweight Medium Access Control Protocol for Wireless Sensor Networks

This document gives an overview of the most relevant design aspects of the lightweight medium access control (LMAC) protocol [16] for wireless sensor networks (WSNs). These aspects include selfconfiguring and localized operation of the protocol, time synchronization in multi-hop networks, network setup and strategies to reduce latency.\ud The main goal in designing a MAC protocol for WSNs is to minimize energy waste - due to collisions of messages and idle listening - , while limiting latency and loss of data throughput. It is shown that the LMAC protocol performs well on energy-efficiency and delivery ratio [19] and can\ud ensure a long-lived, self-configuring network of battery-powered wireless sensors.\ud The protocol is based upon scheduled access, in which each node periodically gets a time slot, during which it is allowed to transmit. The protocol does not depend on central managers to assign time slots to nodes.\ud WSNs are assumed to be multi-hop networks, which allows for spatial reuse of time slots, just like frequency reuse in GSM cells. In this document, we present a distributed algorithm that allows nodes to find unoccupied time slots, which can be used without causing collision or interference to other nodes. Each node takes one time slot in control to\ud carry out its data transmissions. Latency is affected by the actual choice of controlled time slot. We present time slot choosing strategies, which ensure a low latency for the most common data traffic in WSNs: reporting of sensor readings to central sinks

Distributed and Load-Adaptive Self Configuration in Sensor Networks

Proactive self-configuration is crucial for MANETs such as sensor networks, as these are often deployed in hostile environments and are ad hoc in nature. The dynamic architecture of the network is monitored by exchanging so-called Network State Beacons (NSBs) between key network nodes. The Beacon Exchange rate and the network state define both the time and nature of a proactive action to combat network performance degradation at a time of crisis. It is thus essential to optimize these parameters for the dynamic load profile of the network. This paper presents a novel distributed adaptive optimization Beacon Exchange selection model which considers distributed network load for energy efficient monitoring and proactive reconfiguration of the network. The results show an improvement of 70% in throughput, while maintaining a guaranteed quality-of- service for a small control-traffic overhead

Detection techniques of selective forwarding attacks in wireless sensor networks: a survey

The wireless sensor network has become a hot research area due its wide range of application in military and civilian domain, but as it uses wireless media for communication these are easily prone to security attacks. There are number of attacks on wireless sensor networks like black hole attack, sink hole attack, Sybil attack, selective forwarding attacks etc. in this paper we will concentrate on selective forwarding attacks In selective forwarding attacks, malicious nodes behave like normal nodes and selectively drop packets. The selection of dropping nodes may be random. Identifying such attacks is very difficult and sometimes impossible. In this paper we have listed up some detection techniques, which have been proposed by different researcher in recent years, there we also have tabular representation of qualitative analysis of detection techniquesComment: 6 Page

Topology Management in Wireless Sensor Networks: Multi-State Algorithms

In order to maximize the network’s lifetime and ensure the connectivity among the nodes, most topology management practices use a subgroup of nodes for routing. This paper provides an in-depth look at existing topology management control algorithms in Multi-state structure. We suggest a new algorithm based on Geographical Adaptive Fidelity (GAF) and Adaptive Self-Configuring Sensor Networks Topology (ASCENT). The new proposed algorithm outperforms both GAF and ASCENT algorithms