Overview of Swallow --- A Scalable 480-core System for Investigating the Performance and Energy Efficiency of Many-core Applications and Operating Systems

We present Swallow, a scalable many-core architecture, with a current configuration of 480 x 32-bit processors. Swallow is an open-source architecture, designed from the ground up to deliver scalable increases in usable computational power to allow experimentation with many-core applications and the operating systems that support them. Scalability is enabled by the creation of a tile-able system with a low-latency interconnect, featuring an attractive communication-to-computation ratio and the use of a distributed memory configuration. We analyse the energy and computational and communication performances of Swallow. The system provides 240GIPS with each core consuming 71--193mW, dependent on workload. Power consumption per instruction is lower than almost all systems of comparable scale. We also show how the use of a distributed operating system (nOS) allows the easy creation of scalable software to exploit Swallow's potential. Finally, we show two use case studies: modelling neurons and the overlay of shared memory on a distributed memory system.Comment: An open source release of the Swallow system design and code will follow and references to these will be added at a later dat

Static and Dynamic Scheduling for Effective Use of Multicore Systems

Multicore systems have increasingly gained importance in high performance computers. Compared to the traditional microarchitectures, multicore architectures have a simpler design, higher performance-to-area ratio, and improved power efficiency. Although the multicore architecture has various advantages, traditional parallel programming techniques do not apply to the new architecture efficiently. This dissertation addresses how to determine optimized thread schedules to improve data reuse on shared-memory multicore systems and how to seek a scalable solution to designing parallel software on both shared-memory and distributed-memory multicore systems. We propose an analytical cache model to predict the number of cache misses on the time-sharing L2 cache on a multicore processor. The model provides an insight into the impact of cache sharing and cache contention between threads. Inspired by the model, we build the framework of affinity based thread scheduling to determine optimized thread schedules to improve data reuse on all the levels in a complex memory hierarchy. The affinity based thread scheduling framework includes a model to estimate the cost of a thread schedule, which consists of three submodels: an affinity graph submodel, a memory hierarchy submodel, and a cost submodel. Based on the model, we design a hierarchical graph partitioning algorithm to determine near-optimal solutions. We have also extended the algorithm to support threads with data dependences. The algorithms are implemented and incorporated into a feedback directed optimization prototype system. The prototype system builds upon a binary instrumentation tool and can improve program performance greatly on shared-memory multicore architectures. We also study the dynamic data-availability driven scheduling approach to designing new parallel software on distributed-memory multicore architectures. We have implemented a decentralized dynamic runtime system. The design of the runtime system is focused on the scalability metric. At any time only a small portion of a task graph exists in memory. We propose an algorithm to solve data dependences without process cooperation in a distributed manner. Our experimental results demonstrate the scalability and practicality of the approach for both shared-memory and distributed-memory multicore systems. Finally, we present a scalable nonblocking topology-aware multicast scheme for distributed DAG scheduling applications

DIVERSE: a Software Toolkit to Integrate Distributed Simulations with Heterogeneous Virtual Environments

We present DIVERSE (Device Independent Virtual Environments- Reconfigurable, Scalable, Extensible), which is a modular collection of complimentary software packages that we have developed to facilitate the creation of distributed operator-in-the-loop simulations. In DIVERSE we introduce a novel implementation of remote shared memory (distributed shared memory) that uses Internet Protocol (IP) networks. We also introduce a new method that automatically extends hardware drivers (not in the operating system kernel driver sense) into inter-process and Internet hardware services. Using DIVERSE, a program can display in a CAVE™, ImmersaDesk™, head mounted display (HMD), desktop or laptop without modification. We have developed a method of configuring user programs at run-time by loading dynamic shared objects (DSOs), in contrast to the more common practice of creating interpreted configuration languages. We find that by loading DSOs the development time, complexity and size of DIVERSE and DIVERSE user applications is significantly reduced. Configurations to support different I/O devices, device emulators, visual displays, and any component of a user application including interaction techniques, can be changed at run-time by loading different sets of DIVERSE DSOs. In addition, interpreted run-time configuration parsers have been implemented using DIVERSE DSOs; new ones can be created as needed. DIVERSE is free software, licensed under the terms of the GNU General Public License (GPL) and the GNU Lesser General Public License (LGPL) licenses. We describe the DIVERSE architecture and demonstrate how DIVERSE was used in the development of a specific application, an operator-in-the-loop Navy ship-board crane simulator, which runs unmodified on a desktop computer and/or in a CAVE with motion base motion queuing

Functional programming abstractions for weakly consistent systems

In recent years, there has been a wide-spread adoption of both multicore and cloud computing. Traditionally, concurrent programmers have relied on the underlying system providing strong memory consistency, where there is a semblance of concurrent tasks operating over a shared global address space. However, providing scalable strong consistency guarantees as the scale of the system grows is an increasingly difficult endeavor. In a multicore setting, the increasing complexity and the lack of scalability of hardware mechanisms such as cache coherence deters scalable strong consistency. In geo-distributed compute clouds, the availability concerns in the presence of partial failures prohibit strong consistency. Hence, modern multicore and cloud computing platforms eschew strong consistency in favor of weakly consistent memory, where each task\u27s memory view is incomparable with the other tasks. As a result, programmers on these platforms must tackle the full complexity of concurrent programming for an asynchronous distributed system. ^ This dissertation argues that functional programming language abstractions can simplify scalable concurrent programming for weakly consistent systems. Functional programming espouses mutation-free programming, and rare mutations when present are explicit in their types. By controlling and explicitly reasoning about shared state mutations, functional abstractions simplify concurrent programming. Building upon this intuition, this dissertation presents three major contributions, each focused on addressing a particular challenge associated with weakly consistent loosely coupled systems. First, it describes A NERIS, a concurrent functional programming language and runtime for the Intel Single-chip Cloud Computer, and shows how to provide an efficient cache coherent virtual address space on top of a non cache coherent multicore architecture. Next, it describes RxCML, a distributed extension of MULTIMLTON and shows that, with the help of speculative execution, synchronous communication can be utilized as an efficient abstraction for programming asynchronous distributed systems. Finally, it presents QUELEA, a programming system for eventually consistent distributed stores, and shows that the choice of correct consistency level for replicated data type operations and transactions can be automated with the help of high-level declarative contracts

RELEASE: A High-level Paradigm for Reliable Large-scale Server Software

Erlang is a functional language with a much-emulated model for building reliable distributed systems. This paper outlines the RELEASE project, and describes the progress in the rst six months. The project aim is to scale the Erlang's radical concurrency-oriented programming paradigm to build reliable general-purpose software, such as server-based systems, on massively parallel machines. Currently Erlang has inherently scalable computation and reliability models, but in practice scalability is constrained by aspects of the language and virtual machine. We are working at three levels to address these challenges: evolving the Erlang virtual machine so that it can work effectively on large scale multicore systems; evolving the language to Scalable Distributed (SD) Erlang; developing a scalable Erlang infrastructure to integrate multiple, heterogeneous clusters. We are also developing state of the art tools that allow programmers to understand the behaviour of massively parallel SD Erlang programs. We will demonstrate the e ectiveness of the RELEASE approach using demonstrators and two large case studies on a Blue Gene

OpenCL + OpenSHMEM Hybrid Programming Model for the Adapteva Epiphany Architecture

There is interest in exploring hybrid OpenSHMEM + X programming models to extend the applicability of the OpenSHMEM interface to more hardware architectures. We present a hybrid OpenCL + OpenSHMEM programming model for device-level programming for architectures like the Adapteva Epiphany many-core RISC array processor. The Epiphany architecture comprises a 2D array of low-power RISC cores with minimal uncore functionality connected by a 2D mesh Network-on-Chip (NoC). The Epiphany architecture offers high computational energy efficiency for integer and floating point calculations as well as parallel scalability. The Epiphany-III is available as a coprocessor in platforms that also utilize an ARM CPU host. OpenCL provides good functionality for supporting a co-design programming model in which the host CPU offloads parallel work to a coprocessor. However, the OpenCL memory model is inconsistent with the Epiphany memory architecture and lacks support for inter-core communication. We propose a hybrid programming model in which OpenSHMEM provides a better solution by replacing the non-standard OpenCL extensions introduced to achieve high performance with the Epiphany architecture. We demonstrate the proposed programming model for matrix-matrix multiplication based on Cannon's algorithm showing that the hybrid model addresses the deficiencies of using OpenCL alone to achieve good benchmark performance.Comment: 12 pages, 5 figures, OpenSHMEM 2016: Third workshop on OpenSHMEM and Related Technologie

GUMSMP: a scalable parallel Haskell implementation

The most widely available high performance platforms today are hierarchical, with shared memory leaves, e.g. clusters of multi-cores, or NUMA with multiple regions. The Glasgow Haskell Compiler (GHC) provides a number of parallel Haskell implementations targeting different parallel architectures. In particular, GHC-SMP supports shared memory architectures, and GHC-GUM supports distributed memory machines. Both implementations use different, but related, runtime system (RTS) mechanisms and achieve good performance. A specialised RTS for the ubiquitous hierarchical architectures is lacking. This thesis presents the design, implementation, and evaluation of a new parallel Haskell RTS, GUMSMP, that combines shared and distributed memory mechanisms to exploit hierarchical architectures more effectively. The design evaluates a variety of design choices and aims to efficiently combine scalable distributed memory parallelism, using a virtual shared heap over a hierarchical architecture, with low-overhead shared memory parallelism on shared memory nodes. Key design objectives in realising this system are to prefer local work, and to exploit mostly passive load distribution with pre-fetching. Systematic performance evaluation shows that the automatic hierarchical load distribution policies must be carefully tuned to obtain good performance. We investigate the impact of several policies including work pre-fetching, favouring inter-node work distribution, and spark segregation with different export and select policies. We present the performance results for GUMSMP, demonstrating good scalability for a set of benchmarks on up to 300 cores. Moreover, our policies provide performance improvements of up to a factor of 1.5 compared to GHC- GUM. The thesis provides a performance evaluation of distributed and shared heap implementations of parallel Haskell on a state-of-the-art physical shared memory NUMA machine. The evaluation exposes bottlenecks in memory management, which limit scalability beyond 25 cores. We demonstrate that GUMSMP, that combines both distributed and shared heap abstractions, consistently outper- forms the shared memory GHC-SMP on seven benchmarks by a factor of 3.3 on average. Specifically, we show that the best results are obtained when shar- ing memory only within a single NUMA region, and using distributed memory system abstractions across the regions