1,519 research outputs found
Multigrid Preconditioning for a Space-Time Spectral-Element Discontinuous-Galerkin Solver
In this work we examine a multigrid preconditioning approach in the context of a high- order tensor-product discontinuous-Galerkin spectral-element solver. We couple multigrid ideas together with memory lean and efficient tensor-product preconditioned matrix-free smoothers. Block ILU(0)-preconditioned GMRES smoothers are employed on the coarsest spaces. The performance is evaluated on nonlinear problems arising from unsteady scale- resolving solutions of the Navier-Stokes equations: separated low-Mach unsteady ow over an airfoil from laminar to turbulent ow. A reduction in the number of ne space iterations is observed, which proves the efficiency of the approach in terms of preconditioning the linear systems, however this gain was not reflected in the CPU time. Finally, the preconditioner is successfully applied to problems characterized by stiff source terms such as the set of RANS equations, where the simple tensor product preconditioner fails. Theoretical justification about the findings is reported and future work is outlined
A matrix-free high-order discontinuous Galerkin compressible Navier-Stokes solver: A performance comparison of compressible and incompressible formulations for turbulent incompressible flows
Both compressible and incompressible Navier-Stokes solvers can be used and
are used to solve incompressible turbulent flow problems. In the compressible
case, the Mach number is then considered as a solver parameter that is set to a
small value, , in order to mimic incompressible flows.
This strategy is widely used for high-order discontinuous Galerkin
discretizations of the compressible Navier-Stokes equations. The present work
raises the question regarding the computational efficiency of compressible DG
solvers as compared to a genuinely incompressible formulation. Our
contributions to the state-of-the-art are twofold: Firstly, we present a
high-performance discontinuous Galerkin solver for the compressible
Navier-Stokes equations based on a highly efficient matrix-free implementation
that targets modern cache-based multicore architectures. The performance
results presented in this work focus on the node-level performance and our
results suggest that there is great potential for further performance
improvements for current state-of-the-art discontinuous Galerkin
implementations of the compressible Navier-Stokes equations. Secondly, this
compressible Navier-Stokes solver is put into perspective by comparing it to an
incompressible DG solver that uses the same matrix-free implementation. We
discuss algorithmic differences between both solution strategies and present an
in-depth numerical investigation of the performance. The considered benchmark
test cases are the three-dimensional Taylor-Green vortex problem as a
representative of transitional flows and the turbulent channel flow problem as
a representative of wall-bounded turbulent flows
Simulation of flows with violent free surface motion and moving objects using unstructured grids
This is the peer reviewed version of the following article: [Löhner, R. , Yang, C. and Oñate, E. (2007), Simulation of flows with violent free surface motion and moving objects using unstructured grids. Int. J. Numer. Meth. Fluids, 53: 1315-1338. doi:10.1002/fld.1244], which has been published in final form at https://doi.org/10.1002/fld.1244. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.A volume of fluid (VOF) technique has been developed and coupled with an incompressible Euler/Navier–Stokes solver operating on adaptive, unstructured grids to simulate the interactions of extreme waves and three-dimensional structures. The present implementation follows the classic VOF implementation for the liquid–gas system, considering only the liquid phase. Extrapolation algorithms are used to obtain velocities and pressure in the gas region near the free surface. The VOF technique is validated against the classic dam-break problem, as well as series of 2D sloshing experiments and results from SPH calculations. These and a series of other examples demonstrate that the ability of the present approach to simulate violent free surface flows with strong nonlinear behaviour.Peer ReviewedPostprint (author's final draft
Preconditioning of a hybridized discontinuous Galerkin finite element method for the Stokes equations
We present optimal preconditioners for a recently introduced hybridized
discontinuous Galerkin finite element discretization of the Stokes equations.
Typical of hybridized discontinuous Galerkin methods, the method has
degrees-of-freedom that can be eliminated locally (cell-wise), thereby
significantly reducing the size of the global problem. Although the linear
system becomes more complex to analyze after static condensation of these
element degrees-of-freedom, the pressure Schur complement of the original and
reduced problem are the same. Using this fact, we prove spectral equivalence of
this Schur complement to two simple matrices, which is then used to formulate
optimal preconditioners for the statically condensed problem. Numerical
simulations in two and three spatial dimensions demonstrate the good
performance of the proposed preconditioners
A Compact Third-order Gas-kinetic Scheme for Compressible Euler and Navier-Stokes Equations
In this paper, a compact third-order gas-kinetic scheme is proposed for the
compressible Euler and Navier-Stokes equations. The main reason for the
feasibility to develop such a high-order scheme with compact stencil, which
involves only neighboring cells, is due to the use of a high-order gas
evolution model. Besides the evaluation of the time-dependent flux function
across a cell interface, the high-order gas evolution model also provides an
accurate time-dependent solution of the flow variables at a cell interface.
Therefore, the current scheme not only updates the cell averaged conservative
flow variables inside each control volume, but also tracks the flow variables
at the cell interface at the next time level. As a result, with both cell
averaged and cell interface values the high-order reconstruction in the current
scheme can be done compactly. Different from using a weak formulation for
high-order accuracy in the Discontinuous Galerkin (DG) method, the current
scheme is based on the strong solution, where the flow evolution starting from
a piecewise discontinuous high-order initial data is precisely followed. The
cell interface time-dependent flow variables can be used for the initial data
reconstruction at the beginning of next time step. Even with compact stencil,
the current scheme has third-order accuracy in the smooth flow regions, and has
favorable shock capturing property in the discontinuous regions. Many test
cases are used to validate the current scheme. In comparison with many other
high-order schemes, the current method avoids the use of Gaussian points for
the flux evaluation along the cell interface and the multi-stage Runge-Kutta
time stepping technique.Comment: 27 pages, 38 figure
- …