Cross-layer Soft Error Analysis and Mitigation at Nanoscale Technologies

This thesis addresses the challenge of soft error modeling and mitigation in nansoscale technology nodes and pushes the state-of-the-art forward by proposing novel modeling, analyze and mitigation techniques. The proposed soft error sensitivity analysis platform accurately models both error generation and propagation starting from a technology dependent device level simulations all the way to workload dependent application level analysis

Design and Evaluation of Radiation-Hardened Standard Cell Flip-Flops

Use of a standard non-rad-hard digital cell library in the rad-hard design can be a cost-effective solution for space applications. In this paper we demonstrate how a standard non-rad-hard flip-flop, as one of the most vulnerable digital cells, can be converted into a rad-hard flip-flop without modifying its internal structure. We present five variants of a Triple Modular Redundancy (TMR) flip-flop: baseline TMR flip-flop, latch-based TMR flip-flop, True-Single Phase Clock (TSPC) TMR flip-flop, scannable TMR flip-flop and self-correcting TMR flip-flop. For all variants, the multi-bit upsets have been addressed by applying special placement constraints, while the Single Event Transient (SET) mitigation was achieved through the usage of customized SET filters and selection of optimal inverter sizes for the clock and reset trees. The proposed flip-flop variants feature differing performance, thus enabling to choose the optimal solution for every sensitive node in the circuit, according to the predefined design constraints. Several flip-flop designs have been validated on IHP’s 130nm BiCMOS process, by irradiation of custom-designed shift registers. It has been shown that the proposed TMR flip-flops are robust to soft errors with a threshold Linear Energy Transfer (LET) from ( 32.4 (MeV⋅cm2/mg) ) to ( 62.5 (MeV⋅cm2/mg) ), depending on the variant

INVESTIGATING THE EFFECTS OF SINGLE-EVENT UPSETS IN STATIC AND DYNAMIC REGISTERS

Radiation-induced single-event upsets (SEUs) pose a serious threat to the reliability of registers. The existing SEU analyses for static CMOS registers focus on the circuit-level impact and may underestimate the pertinent SEU information provided through node analysis. This thesis proposes SEU node analysis to evaluate the sensitivity of static registers and apply the obtained node information to improve the robustness of the register through selective node hardening (SNH) technique. Unlike previous hardening techniques such as the Triple Modular Redundancy (TMR) and the Dual Interlocked Cell (DICE) latch, the SNH method does not introduce larger area overhead. Moreover, this thesis also explores the impact of SEUs in dynamic flip-flops, which are appealing for the design of high-performance microprocessors. Previous work either uses the approaches for static flip-flops to evaluate SEU effects in dynamic flip-flops or overlook the SEU injected during the precharge phase. In this thesis, possible SEU sensitive nodes in dynamic flip-flops are re-examined and their window of vulnerability (WOV) is extended. Simulation results for SEU analysis in non-hardened dynamic flip-flops reveal that the last 55.3 % of the precharge time and a 100% evaluation time are affected by SEUs

Soft-Error Resilience Framework For Reliable and Energy-Efficient CMOS Logic and Spintronic Memory Architectures

The revolution in chip manufacturing processes spanning five decades has proliferated high performance and energy-efficient nano-electronic devices across all aspects of daily life. In recent years, CMOS technology scaling has realized billions of transistors within large-scale VLSI chips to elevate performance. However, these advancements have also continually augmented the impact of Single-Event Transient (SET) and Single-Event Upset (SEU) occurrences which precipitate a range of Soft-Error (SE) dependability issues. Consequently, soft-error mitigation techniques have become essential to improve systems\u27 reliability. Herein, first, we proposed optimized soft-error resilience designs to improve robustness of sub-micron computing systems. The proposed approaches were developed to deliver energy-efficiency and tolerate double/multiple errors simultaneously while incurring acceptable speed performance degradation compared to the prior work. Secondly, the impact of Process Variation (PV) at the Near-Threshold Voltage (NTV) region on redundancy-based SE-mitigation approaches for High-Performance Computing (HPC) systems was investigated to highlight the approach that can realize favorable attributes, such as reduced critical datapath delay variation and low speed degradation. Finally, recently, spin-based devices have been widely used to design Non-Volatile (NV) elements such as NV latches and flip-flops, which can be leveraged in normally-off computing architectures for Internet-of-Things (IoT) and energy-harvesting-powered applications. Thus, in the last portion of this dissertation, we design and evaluate for soft-error resilience NV-latching circuits that can achieve intriguing features, such as low energy consumption, high computing performance, and superior soft errors tolerance, i.e., concurrently able to tolerate Multiple Node Upset (MNU), to potentially become a mainstream solution for the aerospace and avionic nanoelectronics. Together, these objectives cooperate to increase energy-efficiency and soft errors mitigation resiliency of larger-scale emerging NV latching circuits within iso-energy constraints. In summary, addressing these reliability concerns is paramount to successful deployment of future reliable and energy-efficient CMOS logic and spintronic memory architectures with deeply-scaled devices operating at low-voltages

Design of Soft Error Robust High Speed 64-bit Logarithmic Adder

Continuous scaling of the transistor size and reduction of the operating voltage have led to a significant performance improvement of integrated circuits. However, the vulnerability of the scaled circuits to transient data upsets or soft errors, which are caused by alpha particles and cosmic neutrons, has emerged as a major reliability concern. In this thesis, we have investigated the effects of soft errors in combinational circuits and proposed soft error detection techniques for high speed adders. In particular, we have proposed an area-efficient 64-bit soft error robust logarithmic adder (SRA). The adder employs the carry merge Sklansky adder architecture in which carries are generated every 4 bits. Since the particle-induced transient, which is often referred to as a single event transient (SET) typically lasts for 100~200 ps, the adder uses time redundancy by sampling the sum outputs twice. The sampling instances have been set at 110 ps apart. In contrast to the traditional time redundancy, which requires two clock cycles to generate a given output, the SRA generates an output in a single clock cycle. The sampled sum outputs are compared using a 64-bit XOR tree to detect any possible error. An energy efficient 4-input transmission gate based XOR logic is implemented to reduce the delay and the power in this case. The pseudo-static logic (PSL), which has the ability to recover from a particle induced transient, is used in the adder implementation. In comparison with the space redundant approach which requires hardware duplication for error detection, the SRA is 50% more area efficient. The proposed SRA is simulated for different operands with errors inserted at different nodes at the inputs, the carry merge tree, and the sum generation circuit. The simulation vectors are carefully chosen such that the SET is not masked by error masking mechanisms, which are inherently present in combinational circuits. Simulation results show that the proposed SRA is capable of detecting 77% of the errors. The undetected errors primarily result when the SET causes an even number of errors and when errors occur outside the sampling window

Single event upset hardened CMOS combinational logic and clock buffer design

A radiation strike on semiconductor device may lead to charge collection, which may manifest as a wrong logic level causing failure. Soft errors or Single Event Upsets (SEU) caused by radiation strikes are one of the main failure modes in a VLSI circuit. Previous work predicts that soft error rate may dominate the failure rate in VLSI circuit compared to all other failure modes put together. The issue of single event upsets (SEU) need to be addressed such that the failure rate of the chips dues to SEU is in the acceptable range. Memory circuits are designed to be error free with the help of error correction codes. Technology scaling is driving up the SEU rate of combinational logic and it is predicted that the soft error rate (SER) of combinational logic may dominate the SER of unpro-tected memory by the year 2011. Hence a robust combinational logic methodology must be designed for SEU hardening. Recent studies have also shown that clock distribution network is becoming increasingly vulnerable to radiation strike due to reduced capaci-tance at the clock leaf node. A strike on clock leaf node may propagate to many flip-flops increasing the system SER considerably. In this thesis we propose a novel method to improve the SER of the circuit by filtering single event upsets in the combinational logic and clock distribution network. Our ap-proach results in minimal circuit overhead and also requires minimal effort by the de-signer to implement the proposed method. In this thesis we focus on preventing the propagation of SEU rather than eliminating the SEU on each sensitive gate

Digital design techniques for dependable High-Performance Computing

L'abstract è presente nell'allegato / the abstract is in the attachmen

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

High-speed Energy-efficient Soft Error Tolerant Flip-flops

Single event upset (SEU) or soft error caused by alpha particles and cosmic neutrons has emerged as a key reliability concern in nanoscale CMOS technologies. The decrease in signal charge due to the reduction of the operating voltage and node capacitance primarily increases the soft error rate (SER) in integrated circuits. The situation is aggravated by the increasing number of memory elements (e.g., flip-flops) on chip, the lack of inherent error masking mechanisms in these elements, and the below-nominal voltage operation for reducing the power consumption. In fact, limiting the power consumption is critical to enhance the battery life of portable electronic devices. In this thesis, I present several soft error tolerant flip-flops that offer high speed while consuming low power either inherently or through low-energy clocking scheme. The proposed soft error tolerant flip-flops can be divided into two major categories: i) flip-flops with square-wave clock and ii) flip-flops with energy recovery sinusoidal clock, which is very attractive to significantly lower the clock power consumption. The two square-wave clock based proposed flip-flops are: a true single phase clock (TSPC) DICE flip-flop and a clocked precharge soft error robust flip-flop. These flip-flops use fewer transistors and offer as much as 35% lower power-delay-product (PDP) than existing soft error robust pulsed DICE flip-flop. The energy recovery clock based proposed flip-flops are: a soft clock edge SEU hardened (SCESH) flip-flop, C2-DICE flip-flop, a conditional pass Quatro (CPQ) flip-flop, and two energy recovery TSPC flip-flops. These flip-flops exhibit lower PDP ranging from 30% to 69% when compared to the pulsed DICE flip-flop and the single-ended conditional capturing energy recovery (SCCER) flip-flop. Thus, the proposed flip-flops provide a wide range of power and delay choices and as such can be used in a variety of low-power or high performance applications including high-end microprocessors, low-power system-on-chips (SOCs), and implantable medical devices

Statistical Reliability Estimation of Microprocessor-Based Systems

What is the probability that the execution state of a given microprocessor running a given application is correct, in a certain working environment with a given soft-error rate? Trying to answer this question using fault injection can be very expensive and time consuming. This paper proposes the baseline for a new methodology, based on microprocessor error probability profiling, that aims at estimating fault injection results without the need of a typical fault injection setup. The proposed methodology is based on two main ideas: a one-time fault-injection analysis of the microprocessor architecture to characterize the probability of successful execution of each of its instructions in presence of a soft-error, and a static and very fast analysis of the control and data flow of the target software application to compute its probability of success. The presented work goes beyond the dependability evaluation problem; it also has the potential to become the backbone for new tools able to help engineers to choose the best hardware and software architecture to structurally maximize the probability of a correct execution of the target softwar