254 research outputs found

    Humanoid Robots

    Get PDF
    For many years, the human being has been trying, in all ways, to recreate the complex mechanisms that form the human body. Such task is extremely complicated and the results are not totally satisfactory. However, with increasing technological advances based on theoretical and experimental researches, man gets, in a way, to copy or to imitate some systems of the human body. These researches not only intended to create humanoid robots, great part of them constituting autonomous systems, but also, in some way, to offer a higher knowledge of the systems that form the human body, objectifying possible applications in the technology of rehabilitation of human beings, gathering in a whole studies related not only to Robotics, but also to Biomechanics, Biomimmetics, Cybernetics, among other areas. This book presents a series of researches inspired by this ideal, carried through by various researchers worldwide, looking for to analyze and to discuss diverse subjects related to humanoid robots. The presented contributions explore aspects about robotic hands, learning, language, vision and locomotion

    Planning and Control Strategies for Motion and Interaction of the Humanoid Robot COMAN+

    Get PDF
    Despite the majority of robotic platforms are still confined in controlled environments such as factories, thanks to the ever-increasing level of autonomy and the progress on human-robot interaction, robots are starting to be employed for different operations, expanding their focus from uniquely industrial to more diversified scenarios. Humanoid research seeks to obtain the versatility and dexterity of robots capable of mimicking human motion in any environment. With the aim of operating side-to-side with humans, they should be able to carry out complex tasks without posing a threat during operations. In this regard, locomotion, physical interaction with the environment and safety are three essential skills to develop for a biped. Concerning the higher behavioural level of a humanoid, this thesis addresses both ad-hoc movements generated for specific physical interaction tasks and cyclic movements for locomotion. While belonging to the same category and sharing some of the theoretical obstacles, these actions require different approaches: a general high-level task is composed of specific movements that depend on the environment and the nature of the task itself, while regular locomotion involves the generation of periodic trajectories of the limbs. Separate planning and control architectures targeting these aspects of biped motion are designed and developed both from a theoretical and a practical standpoint, demonstrating their efficacy on the new humanoid robot COMAN+, built at Istituto Italiano di Tecnologia. The problem of interaction has been tackled by mimicking the intrinsic elasticity of human muscles, integrating active compliant controllers. However, while state-of-the-art robots may be endowed with compliant architectures, not many can withstand potential system failures that could compromise the safety of a human interacting with the robot. This thesis proposes an implementation of such low-level controller that guarantees a fail-safe behaviour, removing the threat that a humanoid robot could pose if a system failure occurred

    A Robot Operating System (ROS) based humanoid robot control

    Get PDF
    This thesis presents adapting techniques required to enhance the capability of a commercially available robot, namely, Robotis Bioloid Premium Humanoid Robot (BPHR). BeagleBone Black (BBB), the decision-making and implementing (intelligence providing) component, with multifunctional capabilities is used in this research. Robot operating System (ROS) and its libraries, as well as Python Script and its libraries have been developed and incorporated into the BBB. This fortified BBB intelligence providing component is then transplanted into the structure of the Robotis Bioloid humanoid robot, after removing the latter’s original decision-making and implementing component (controller). Thus, this study revitalizes the Bioloid humanoid robot by converting it into a humanoid robot with multiple features that can be inherited using ROS. This is a first of its kind approach wherein ROS is used as the development framework in conjunction with the main BBB controller and the software impregnated with Python libraries is used to integrate robotic functions. A full ROS computation is developed and a high level Application Programming Interface (API) usable by software utilizing ROS services is also developed. In this revised two-legged-humanoid robot, USB2Dynamixel connector is used to operate the Dynamixel AX-12A actuators through the Wi-Fi interface of the fortified BBB. An accelerometer sensor supports balancing of the robot, and updates data to the BBB periodically. An Infrared (IR) sensor is used to detect obstacles. This dynamic model is used to actuate the motors mounted on the robot leg thereby resulting in a swing-stance period of the legs for a stable forward movement of the robot. The maximum walking speed of the robot is 0.5 feet/second, beyond this limit the robot becomes unstable. The angle at which the robot leans is governed by the feedback from the accelerometer sensor, which is 20 degrees. If the robot tilts beyond a specific degree, then it would come back to its standstill position and stop further movement. When the robot moves forward, the IR sensors sense obstacles in front of the robot. If an obstacle is detected within 35 cm, then the robot stops moving further. Implementation of ROS on top of the BBB (by replacing CM530 controller with the BBB) and using feedback controls from the accelerometer and IR sensor to control the two-legged robotic movement are the novelties of this work

    Inverse Kinematics to a Stewart Platform

    Get PDF
    Mechanical systems in motion type parallel structures are solid, fast and accurate. Between mobile systems parallel the best known and used system is that of a Stewart platforms, as being and the oldest system, quickly, solid and accurate. The paper presents a few main elements of the Stewart platforms. In the case where a motto element consists of a structure composed of two elements in a relative movement from the point of view of the train of propulsion and especially in the dynamic calculations, it is more convenient to represent the motto element as a single moving item. The paper presents an exact, original analytical geometry method for determining the kinematic and dynamic parameters of a parallel mobile structure. Compared with other methods already known, the presented method has the great advantage of being an exact analytical method of calculation and not one iterative-approximately

    Inverse Kinematics to a Stewart Platform

    Get PDF
    Mechanical systems in motion type parallel structures are solid, fast and accurate. Between mobile systems parallel the best known and used system is that of a Stewart platforms, as being and the oldest system, quickly, solid and accurate. The paper presents a few main elements of the Stewart platforms. In the case where a motto element consists of a structure composed of two elements in a relative movement from the point of view of the train of propulsion and especially in the dynamic calculations, it is more convenient to represent the motto element as a single moving item. The paper presents an exact, original analytical geometry method for determining the kinematic and dynamic parameters of a parallel mobile structure. Compared with other methods already known, the presented method has the great advantage of being an exact analytical method of calculation and not one iterative-approximately

    Locomoção bípede adaptativa a partir de uma única demonstração usando primitivas de movimento

    Get PDF
    Doutoramento em Engenharia EletrotécnicaEste trabalho aborda o problema de capacidade de imitação da locomoção humana através da utilização de trajetórias de baixo nível codificadas com primitivas de movimento e utilizá-las para depois generalizar para novas situações, partindo apenas de uma demonstração única. Assim, nesta linha de pensamento, os principais objetivos deste trabalho são dois: o primeiro é analisar, extrair e codificar demonstrações efetuadas por um humano, obtidas por um sistema de captura de movimento de forma a modelar tarefas de locomoção bípede. Contudo, esta transferência não está limitada à simples reprodução desses movimentos, requerendo uma evolução das capacidades para adaptação a novas situações, assim como lidar com perturbações inesperadas. Assim, o segundo objetivo é o desenvolvimento e avaliação de uma estrutura de controlo com capacidade de modelação das ações, de tal forma que a demonstração única apreendida possa ser modificada para o robô se adaptar a diversas situações, tendo em conta a sua dinâmica e o ambiente onde está inserido. A ideia por detrás desta abordagem é resolver o problema da generalização a partir de uma demonstração única, combinando para isso duas estruturas básicas. A primeira consiste num sistema gerador de padrões baseado em primitivas de movimento utilizando sistemas dinâmicos (DS). Esta abordagem de codificação de movimentos possui propriedades desejáveis que a torna ideal para geração de trajetórias, tais como a possibilidade de modificar determinados parâmetros em tempo real, tais como a amplitude ou a frequência do ciclo do movimento e robustez a pequenas perturbações. A segunda estrutura, que está embebida na anterior, é composta por um conjunto de osciladores acoplados em fase que organizam as ações de unidades funcionais de forma coordenada. Mudanças em determinadas condições, como o instante de contacto ou impactos com o solo, levam a modelos com múltiplas fases. Assim, em vez de forçar o movimento do robô a situações pré-determinadas de forma temporal, o gerador de padrões de movimento proposto explora a transição entre diferentes fases que surgem da interação do robô com o ambiente, despoletadas por eventos sensoriais. A abordagem proposta é testada numa estrutura de simulação dinâmica, sendo que várias experiências são efetuadas para avaliar os métodos e o desempenho dos mesmos.This work addresses the problem of learning to imitate human locomotion actions through low-level trajectories encoded with motion primitives and generalizing them to new situations from a single demonstration. In this line of thought, the main objectives of this work are twofold: The first is to analyze, extract and encode human demonstrations taken from motion capture data in order to model biped locomotion tasks. However, transferring motion skills from humans to robots is not limited to the simple reproduction, but requires the evaluation of their ability to adapt to new situations, as well as to deal with unexpected disturbances. Therefore, the second objective is to develop and evaluate a control framework for action shaping such that the single-demonstration can be modulated to varying situations, taking into account the dynamics of the robot and its environment. The idea behind the approach is to address the problem of generalization from a single-demonstration by combining two basic structures. The first structure is a pattern generator system consisting of movement primitives learned and modelled by dynamical systems (DS). This encoding approach possesses desirable properties that make them well-suited for trajectory generation, namely the possibility to change parameters online such as the amplitude and the frequency of the limit cycle and the intrinsic robustness against small perturbations. The second structure, which is embedded in the previous one, consists of coupled phase oscillators that organize actions into functional coordinated units. The changing contact conditions plus the associated impacts with the ground lead to models with multiple phases. Instead of forcing the robot’s motion into a predefined fixed timing, the proposed pattern generator explores transition between phases that emerge from the interaction of the robot system with the environment, triggered by sensor-driven events. The proposed approach is tested in a dynamics simulation framework and several experiments are conducted to validate the methods and to assess the performance of a humanoid robot
    corecore