Error-Floors of the 802.3an LDPC Code for Noise Assisted Decoding

In digital communication, information is sent as bits, which is corrupted by the noise present in wired/wireless medium known as the channel. The Low Density Parity Check (LDPC) codes are a family of error correction codes used in communication systems to detect and correct erroneous data at the receiver. Data is encoded with error correction coding at the transmitter and decoded at the receiver. The Noisy Gradient Descent BitFlip (NGDBF) decoding algorithm is a new algorithm with excellent decoding performance with relatively low implementation requirements. This dissertation aims to characterize the performance of the NGDBF algorithm. A simple improvement over NGDBF called the Re-decoded NGDBF (R-NGDBF) is proposed to enhance the performance of NGDBF decoding algorithm. A general method to estimate the decoding parameters of NGDBF is presented. The estimated parameters are then verified in a hardware implementation of the decoder to validate the accuracy of the estimation technique

Relaxed Half-Stochastic Belief Propagation

Low-density parity-check codes are attractive for high throughput applications because of their low decoding complexity per bit, but also because all the codeword bits can be decoded in parallel. However, achieving this in a circuit implementation is complicated by the number of wires required to exchange messages between processing nodes. Decoding algorithms that exchange binary messages are interesting for fully-parallel implementations because they can reduce the number and the length of the wires, and increase logic density. This paper introduces the Relaxed Half-Stochastic (RHS) decoding algorithm, a binary message belief propagation (BP) algorithm that achieves a coding gain comparable to the best known BP algorithms that use real-valued messages. We derive the RHS algorithm by starting from the well-known Sum-Product algorithm, and then derive a low-complexity version suitable for circuit implementation. We present extensive simulation results on two standardized codes having different rates and constructions, including low bit error rate results. These simulations show that RHS can be an advantageous replacement for the existing state-of-the-art decoding algorithms when targeting fully-parallel implementations

Hardware implementation aspects of polar decoders and ultra high-speed LDPC decoders

The goal of channel coding is to detect and correct errors that appear during the transmission of information. In the past few decades, channel coding has become an integral part of most communications standards as it improves the energy-efficiency of transceivers manyfold while only requiring a modest investment in terms of the required digital signal processing capabilities. The most commonly used channel codes in modern standards are low-density parity-check (LDPC) codes and Turbo codes, which were the first two types of codes to approach the capacity of several channels while still being practically implementable in hardware. The decoding algorithms for LDPC codes, in particular, are highly parallelizable and suitable for high-throughput applications. A new class of channel codes, called polar codes, was introduced recently. Polar codes have an explicit construction and low-complexity encoding and successive cancellation (SC) decoding algorithms. Moreover, polar codes are provably capacity achieving over a wide range of channels, making them very attractive from a theoretical perspective. Unfortunately, polar codes under standard SC decoding cannot compete with the LDPC and Turbo codes that are used in current standards in terms of their error-correcting performance. For this reason, several improved SC-based decoding algorithms have been introduced. The most prominent SC-based decoding algorithm is the successive cancellation list (SCL) decoding algorithm, which is powerful enough to approach the error-correcting performance of LDPC codes. The original SCL decoding algorithm was described in an arithmetic domain that is not well-suited for hardware implementations and is not clear how an efficient SCL decoder architecture can be implemented. To this end, in this thesis, we re-formulate the SCL decoding algorithm in two distinct arithmetic domains, we describe efficient hardware architectures to implement the resulting SCL decoders, and we compare the decoders with existing LDPC and Turbo decoders in terms of their error-correcting performance and their implementation efficiency. Due to the ongoing technology scaling, the feature sizes of integrated circuits keep shrinking at a remarkable pace. As transistors and memory cells keep shrinking, it becomes increasingly difficult and costly (in terms of both area and power) to ensure that the implemented digital circuits always operate correctly. Thus, manufactured digital signal processing circuits, including channel decoder circuits, may not always operate correctly. Instead of discarding these faulty dies or using costly circuit-level fault mitigation mechanisms, an alternative approach is to try to live with certain malfunctions, provided that the algorithm implemented by the circuit is sufficiently fault-tolerant. In this spirit, in this thesis we examine decoding of polar codes and LDPC codes under the assumption that the memories that are used within the decoders are not fully reliable. We show that, in both cases, there is inherent fault-tolerance and we also propose some methods to reduce the effect of memory faults on the error-correcting performance of the considered decoders

VLSI Implementation of a Rate Decoder for Structural LDPC Channel Codes

AbstractThis paper proposes a low complexity low-density parity check decoder (LDPC) design. The design mainly accomplishes a message passing algorithm and systolic high throughput architecture. The typical mathematical calculations are based on the observation that nodes with high log likelihood ratio provide almost same information in every iteration and can be considered as stationary, we propose an algorithm in which the parity check matrix H is updated to a reduced complexity form every time a stationary node is encountered which results in lesser number of numerical computations in subsequent iterations. In this paper, we contemplately focuses on computational complexity and the decoder design significantly benefits from the high throughput point of view and the various improvisations introduced at various levels of abstraction in the decoder design. Threshold Controlled Min Sum Algorithm implements the LDPC decoder design for a code compliant with wired and wireless applications. A high performance LDPC decoder has been designed that achieves a throughput of 0.890 Gbps. The whole design of LDPC Decoder is designed, simulated and synthesized using Xilinx ISE 13.1 EDA Tool

Multi-Stream LDPC Decoder on GPU of Mobile Devices

Low-density parity check (LDPC) codes have been extensively applied in mobile communication systems due to their excellent error correcting capabilities. However, their broad adoption has been hindered by the high complexity of the LDPC decoder. Although to date, dedicated hardware has been used to implement low latency LDPC decoders, recent advancements in the architecture of mobile processors have made it possible to develop software solutions. In this paper, we propose a multi-stream LDPC decoder designed for a mobile device. The proposed decoder uses graphics processing unit (GPU) of a mobile device to achieve efficient real-time decoding. The proposed solution is implemented on an NVIDIA Tegra board as a system on a chip (SoC), where our results indicate that we can control the load on the central processing units through the multi-stream structure

Research on energy-efficient VLSI decoder for LDPC code

制度:新 ; 報告番号:甲3742号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6113Waseda Universit

A Vision for 5G Channel Coding

Channel coding is a vital but complex component of cellular communication systems, which is used for correcting the communication errors that are caused by noise, interference and poor signal strength. The turbo code was selected as the main channel code in 3G and 4G cellular systems, but the 3GPP standardization group is currently debating whether it should be replaced by the Low Density Parity Check (LDPC) code in 5G. This debate is being driven by the requirements for 5G, which include throughputs of up to 20 Gbps in the downlink to user devices, ultra-low latencies, as well as much greater flexibility to support diverse use-cases, including broadband data, Internet of Things (IoT), vehicular communications and cloud computing. In our previous white paper, we demonstrated that flexible turbo codes can achieve these requirements with superior hardware- and energy-efficiencies than flexible LDPC decoders. However, the proponents of LDPC codes have highlighted that inflexible LDPC decoders can achieve throughputs of 20 Gbps with particularly attractive hardware- and energy- efficiencies. This white paper outlines a vision for 5G, in which channel coding is provided by a flexible turbo code for most use-cases, but which is supported by an inflexible LDPC code for 20 Gbps downlink use-cases, such as fixed wireless broadband. We demonstrate that this approach can meet all of the 5G requirements, while offering hardware- and energy-efficiencies that are significantly better than those of an LDPC-only solution. Furthermore, the proposed approach benefits from synergy with the 3G and 4G turbo code, as well as a significantly faster time-to-market for 5G. These benefits translate to a 5G that is significantly more capable, significantly easier to deploy and significantly lower cost