8,480 research outputs found
EXIST: Mission Design Concept and Technology Program
The Energetic X-ray Imaging Survey Telescope (EXIST) is a proposed very large
area coded aperture telescope array, incorporating 8m^2 of pixellated Cd-Zn-Te
(CZT) detectors, to conduct a full-sky imaging and temporal hard x-ray (10-600
keV) survey each 95min orbit. With a sensitivity (5sigma, 1yr) of ~0.05mCrab
(10-150 keV), it will extend the ROSAT soft x-ray (0.5-2.5keV) and proposed
ROSITA medium x-ray (2-10 keV) surveys into the hard x-ray band and enable
identification and study of sources ~10-20X fainter than with the ~15-100keV
survey planned for the upcoming Swift mission. At ~100-600 keV, the ~1mCrab
sensitivity is 300X that achieved in the only previous (HEAO-A4, non-imaging)
all-sky survey. EXIST will address a broad range of key science objectives:
from obscured AGN and surveys for black holes on all scales, which constrain
the accretion history of the universe, to the highest sensitivity and
resolution studies of gamma-ray bursts it will conduct as the Next Generation
Gamma-Ray Burst mission. We summarize the science objectives and mission
drivers, and the results of a mission design study for implementation as a free
flyer mission, with Delta IV launch. Key issues affecting the telescope and
detector design are discussed, and a summary of some of the current design
concepts being studied in support of EXIST is presented for the wide-field but
high resolution coded aperture imaging and very large area array of imaging CZT
detectors. Overall mission design is summarized, and technology development
needs and a development program are outlined which would enable the launch of
EXIST by the end of the decade, as recommended by the NAS/NRC Decadal Survey.Comment: 14 pages, 8 figures, 2 tables. PDF file only. Presented at SPIE (Aug.
2002) and to appear in Proc. SPIE, vol. 485
Development of a front end ASIC for Dark Matter directional detection with MIMAC
A front end ASIC (BiCMOS-SiGe 0.35 \mum) has been developed within the
framework of the MIMAC detector project, which aims at directional detection of
non-baryonic Dark Matter. This search strategy requires 3D reconstruction of
low energy (a few keV) tracks with a gaseous \muTPC. The development of this
front end ASIC is a key point of the project, allowing the 3D track
reconstruction. Each ASIC monitors 16 strips of pixels with charge
preamplifiers and their time over threshold is provided in real time by current
discriminators via two serializing LVDS links working at 320 MHz. The charge is
summed over the 16 strips and provided via a shaper. These specifications have
been chosen in order to build an auto triggered electronics. An acquisition
board and the related software were developed in order to validate this
methodology on a prototype chamber. The prototype detector presents an anode
where 2 x 96 strips of pixels are monitored.Comment: 12 pages, 10 figure
The first version Buffered Large Analog Bandwidth (BLAB1) ASIC for high luminosity collider and extensive radio neutrino detectors
Future detectors for high luminosity particle identification and ultra high
energy neutrino observation would benefit from a digitizer capable of recording
sensor elements with high analog bandwidth and large record depth, in a
cost-effective, compact and low-power way. A first version of the Buffered
Large Analog Bandwidth (BLAB1) ASIC has been designed based upon the lessons
learned from the development of the Large Analog Bandwidth Recorder and
Digitizer with Ordered Readout (LABRADOR) ASIC. While this LABRADOR ASIC has
been very successful and forms the basis of a generation of new, large-scale
radio neutrino detectors, its limited sampling depth is a major drawback. A
prototype has been designed and fabricated with 65k deep sampling at
multi-GSa/s operation. We present test results and directions for future
evolution of this sampling technique.Comment: 15 pages, 26 figures; revised, accepted for publication in NIM
Reading a GEM with a VLSI pixel ASIC used as a direct charge collecting anode
In MicroPattern Gas Detectors (MPGD) when the pixel size is below 100 micron
and the number of pixels is large (above 1000) it is virtually impossible to
use the conventional PCB read-out approach to bring the signal charge from the
individual pixel to the external electronics chain. For this reason a custom
CMOS array of 2101 active pixels with 80 micron pitch, directly used as the
charge collecting anode of a GEM amplifying structure, has been developed and
built. Each charge collecting pad, hexagonally shaped, realized using the top
metal layer of a deep submicron VLSI technology is individually connected to a
full electronics chain (pre-amplifier, shaping-amplifier, sample and hold,
multiplexer) which is built immediately below it by using the remaining five
active layers. The GEM and the drift electrode window are assembled directly
over the chip so the ASIC itself becomes the pixelized anode of a MicroPattern
Gas Detector. With this approach, for the first time, gas detectors have
reached the level of integration and resolution typical of solid state pixel
detectors. Results from the first tests of this new read-out concept are
presented. An Astronomical X-Ray Polarimetry application is also discussed.Comment: 11 pages, 14 figures, presented at the Xth Vienna Conference on
Instrumentation (Vienna, February 16-21 2004). For a higher resolution paper
contact [email protected]
R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging
This report reviews current trends in the R&D of semiconductor pixellated
sensors for vertex tracking and radiation imaging. It identifies requirements
of future HEP experiments at colliders, needed technological breakthroughs and
highlights the relation to radiation detection and imaging applications in
other fields of science.Comment: 17 pages, 2 figures, submitted to the European Strategy Preparatory
Grou
- …