316 research outputs found
Random Access in Uplink Massive MIMO Systems: How to exploit asynchronicity and excess antennas
Massive MIMO systems, where the base stations are equipped with hundreds of
antennas, are an attractive way to handle the rapid growth of data traffic. As
the number of users increases, the initial access and handover in contemporary
networks will be flooded by user collisions. In this work, we propose a random
access procedure that resolves collisions and also performs timing, channel,
and power estimation by simply utilizing the large number of antennas
envisioned in massive MIMO systems and the inherent timing misalignments of
uplink signals during network access and handover. Numerical results are used
to validate the performance of the proposed solution under different settings.
It turns out that the proposed solution can detect all collisions with a
probability higher than 90%, at the same time providing reliable timing and
channel estimates. Moreover, numerical results demonstrate that it is robust to
overloaded situations.Comment: submitted to IEEE Globecom 2016, Washington, DC US
Interference Localization for Uplink OFDMA Systems in Presence of CFOs
Multiple carrier frequency offsets (CFOs) present in the uplink of orthogonal
frequency division multiple access (OFDMA) systems adversely affect subcarrier
orthogonality and impose a serious performance loss. In this paper, we propose
the application of time domain receiver windowing to concentrate the leakage
caused by CFOs to a few adjacent subcarriers with almost no additional
computational complexity. This allows us to approximate the interference matrix
with a quasi-banded matrix by neglecting small elements outside a certain band
which enables robust and computationally efficient signal detection. The
proposed CFO compensation technique is applicable to all types of subcarrier
assignment techniques. Simulation results show that the quasi-banded
approximation of the interference matrix is accurate enough to provide almost
the same bit error rate performance as that of the optimal solution. The
excellent performance of our proposed method is also proven through running an
experiment using our FPGA-based system setup.Comment: Accepted in IEEE WCNC 201
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Random Access in Massive MIMO by Exploiting Timing Offsets and Excess Antennas
Massive MIMO systems, where base stations are equipped with hundreds of
antennas, are an attractive way to handle the rapid growth of data traffic. As
the number of user equipments (UEs) increases, the initial access and handover
in contemporary networks will be flooded by user collisions. In this paper, a
random access protocol is proposed that resolves collisions and performs timing
estimation by simply utilizing the large number of antennas envisioned in
Massive MIMO networks. UEs entering the network perform spreading in both time
and frequency domains, and their timing offsets are estimated at the base
station in closed-form using a subspace decomposition approach. This
information is used to compute channel estimates that are subsequently employed
by the base station to communicate with the detected UEs. The favorable
propagation conditions of Massive MIMO suppress interference among UEs whereas
the inherent timing misalignments improve the detection capabilities of the
protocol. Numerical results are used to validate the performance of the
proposed procedure in cellular networks under uncorrelated and correlated
fading channels. With UEs that may simultaneously become active
with probability 1\% and a total of frequency-time codes (in a given
random access block), it turns out that, with antennas, the proposed
procedure successfully detects a given UE with probability 75\% while providing
reliable timing estimates.Comment: 30 pages, 6 figures, 1 table, submitted to Transactions on
Communication
An Improved Scheme for Initial Ranging in OFDMA-based Networks
An efficient scheme for initial ranging has recently been proposed by X. Fu
et al. in the context of orthogonal frequency-division multiple-access (OFDMA)
networks based on the IEEE 802.16e-2005 standard. The proposed solution aims at
estimating the power levels and timing offsets of the ranging subscriber
stations (RSSs) without taking into account the effect of possible carrier
frequency offsets (CFOs) between the received signals and the base station
local reference. Motivated by the above problem, in the present work we design
a novel ranging scheme for OFDMA in which the ranging signals are assumed to be
misaligned both in time and frequency. Our goal is to estimate the timing
errors and CFOs of each active RSS. Specifically, CFO estimation is
accomplished by resorting to subspacebased methods while a least-squares
approach is employed for timing recovery. Computer simulations are used to
assess the effectiveness of the proposed solution and to make comparisons with
existing alternatives.Comment: 6 pages, 3 figures, To appear in the Proceedings of the 2008 IEEE
International Conference on Communications, Beijing, May 19 - 23, 200
Filter Bank-based Multicarrier Modulation for Multiple Access in Next Generation Satellite Uplinks: A DVB-RCS2-based Experimental Study
In the context of the ongoing evolution of satellite communication systems to their next generation, involving higher data rates and increased flexibility, it is of interest to study in depth the applicability of multiple access (MA) multi-carrier modulation (MCM) schemes that have shown promise to meet the requirements of the future terrestrial networks. A comparative study of MA schemes employing offset quadrature amplitude modulation (OQAM)-based filter bank multicarrier (FBMC/OQAM) and classical orthogonal frequency division multiplexing (OFDM) is presented in this paper. The considered air-interface follows the latest Digital Video Broadcasting (DVB) family of standards for the satellite return link. Considering a high-power amplifier (HPA) of a very small aperture terminal (VSAT), the performance of the two MA schemes is evaluated in an asynchronous multiuser satellite environment involving time and frequency synchronization errors. Our results indicate that while FBMC-based MA (FBMA) is more sensitive near saturation and in the presence of timing errors, it is more robust to frequency offset errors not only in terms of the Total Degradation (TD) but also in terms of the Spectral Efficiency (SE), since it only needs minimal guard bands among the different users. This is a preliminary study of the potential gains from the integration of the FBMA technology in the satellite infrastructures and standards. Future work will include results on single-carrier modulation (SCM) FBMA as well
- …