18,546 research outputs found
Medipix3 Demonstration and understanding of near ideal detector performance for 60 & 80 keV electrons
In our article we report first quantitative measurements of imaging
performance for the current generation of hybrid pixel detector, Medipix3, as
direct electron detector. Utilising beam energies of 60 & 80 keV, measurements
of modulation transfer function (MTF) and detective quantum efficiency (DQE)
have revealed that, in single pixel mode (SPM), energy threshold values can be
chosen to maximize either the MTF or DQE, obtaining values near to, or even
exceeding, those for an ideal detector. We have demonstrated that the Medipix3
charge summing mode (CSM) can deliver simultaneous, near ideal values of both
MTF and DQE. To understand direct detection performance further we have
characterized the detector response to single electron events, building an
empirical model which can predict detector MTF and DQE performance based on
energy threshold. Exemplifying our findings we demonstrate the Medipix3 imaging
performance, recording a fully exposed electron diffraction pattern at 24-bit
depth and images in SPM and CSM modes. Taken together our findings highlight
that for transmission electron microscopy performed at low energies (energies
<100 keV) thick hybrid pixel detectors provide an advantageous and alternative
architecture for direct electron imagin
Characterisation of the Medipix3 detector for 60 and 80 keV electrons
In this paper we report quantitative measurements of the imaging performance for the current generation of hybrid pixel detector, Medipix3, used as a direct electron detector. We have measured the modulation transfer function and detective quantum efficiency at beam energies of 60 and 80 keV. In single pixel mode, energy threshold values can be chosen to maximize either the modulation transfer function or the detective quantum efficiency, obtaining values near to, or exceeding those for a theoretical detector with square pixels. The Medipix3 charge summing mode delivers simultaneous, high values of both modulation transfer function and detective quantum efficiency. We have also characterized the detector response to single electron events and describe an empirical model that predicts the detector modulation transfer function and detective quantum efficiency based on energy threshold. Exemplifying our findings we demonstrate the Medipix3 imaging performance recording a fully exposed electron diffraction pattern at 24-bit depth together with images in single pixel and charge summing modes. Our findings highlight that for transmission electron microscopy performed at low energies (energies <100 keV) thick hybrid pixel detectors provide an advantageous architecture for direct electron imaging
Rapid Online Analysis of Local Feature Detectors and Their Complementarity
A vision system that can assess its own performance and take appropriate actions online to maximize its effectiveness would be a step towards achieving the long-cherished goal of imitating humans. This paper proposes a method for performing an online performance analysis of local feature detectors, the primary stage of many practical vision systems. It advocates the spatial distribution of local image features as a good performance indicator and presents a metric that can be calculated rapidly, concurs with human visual assessments and is complementary to existing offline measures such as repeatability. The metric is shown to provide a measure of complementarity for combinations of detectors, correctly reflecting the underlying principles of individual detectors. Qualitative results on well-established datasets for several state-of-the-art detectors are presented based on the proposed measure. Using a hypothesis testing approach and a newly-acquired, larger image database, statistically-significant performance differences are identified. Different detector pairs and triplets are examined quantitatively and the results provide a useful guideline for combining detectors in applications that require a reasonable spatial distribution of image features. A principled framework for combining feature detectors in these applications is also presented. Timing results reveal the potential of the metric for online applications. © 2013 by the authors; licensee MDPI, Basel, Switzerland
Study of the readout chip and silicon sensor degradation for the CMS pixel upgrade
Hybrid silicon pixel detectors are currently used in the innermost tracking
system of the Compact Muon Solenoid (CMS) experiment. Radiation tolerance up to
fluences expected for a few years of running of the Large Hadron Collider (LHC)
has already been proved, although some degradation of the part of the silicon
detector closer to the interaction point is expected. During the LHC upgrade
phases, the level of dose foreseen for the silicon pixel detector will be much
higher. To face this aspect, dedicated irradiation tests with fluences above
n/cm have been performed on the
silicon sensor and readout chip. Changes in the operation of the sensor and
readout chip as a function of the fluence are presented. The charge collection
efficiency has been studied: partial recovery of the detector efficiency can be
achieved by operating the detectors in a controlled environment and at higher
bias voltage.Comment: conference; 6 pages; 5 figure
Accuracy and effectualness of closed-form, frequency-domain waveforms for non-spinning black hole binaries
The coalescences of binary black hole (BBH) systems, here taken to be
non-spinning, are among the most promising sources for gravitational wave (GW)
ground-based detectors, such as LIGO and Virgo. To detect the GW signals
emitted by BBHs, and measure the parameters of the source, one needs to have in
hand a bank of GW templates that are both effectual (for detection), and
accurate (for measurement). We study the effectualness and the accuracy of the
two types of parametrized banks of templates that are directly defined in the
frequency-domain by means of closed-form expressions, namely 'post-Newtonian'
(PN) and 'phenomenological' models. In absence of knowledge of the exact
waveforms, our study assumes as fiducial, target waveforms the ones generated
by the most accurate version of the effective one body (EOB) formalism. We find
that, for initial GW detectors the use, at each point of parameter space, of
the best closed-form template (among PN and phenomenological models) leads to
an effectualness >97% over the entire mass range and >99% in an important
fraction of parameter space; however, when considering advanced detectors, both
of the closed-form frequency-domain models fail to be effectual enough in
significant domains of the two-dimensional [total mass and mass ratio]
parameter space. Moreover, we find that, both for initial and advanced
detectors, the two closed-form frequency-domain models fail to satisfy the
minimal required accuracy standard in a very large domain of the
two-dimensional parameter space. In addition, a side result of our study is the
determination, as a function of the mass ratio, of the maximum frequency at
which a frequency-domain PN waveform can be 'joined' onto a NR-calibrated EOB
waveform without undue loss of accuracy.Comment: 29 pages, 8 figures, 1 table. Accepted for publication in Phys. Rev.
A review of advances in pixel detectors for experiments with high rate and radiation
The Large Hadron Collider (LHC) experiments ATLAS and CMS have established
hybrid pixel detectors as the instrument of choice for particle tracking and
vertexing in high rate and radiation environments, as they operate close to the
LHC interaction points. With the High Luminosity-LHC upgrade now in sight, for
which the tracking detectors will be completely replaced, new generations of
pixel detectors are being devised. They have to address enormous challenges in
terms of data throughput and radiation levels, ionizing and non-ionizing, that
harm the sensing and readout parts of pixel detectors alike. Advances in
microelectronics and microprocessing technologies now enable large scale
detector designs with unprecedented performance in measurement precision (space
and time), radiation hard sensors and readout chips, hybridization techniques,
lightweight supports, and fully monolithic approaches to meet these challenges.
This paper reviews the world-wide effort on these developments.Comment: 84 pages with 46 figures. Review article.For submission to Rep. Prog.
Phy
- …