A Scalable QoS Scheduling Architecture For WiMAX Multi-Hop Relay Networks.

WiMAX Mobile Multi-hop Relay (MMR) network has been introduced to increase the capacity and extend the coverage area of a single WiMAX Base Station (BS) by the use of a Relay Station (RS)

Multilevel Downlink Relay Queue Aware And Loss Recovery Scheduling For Media Transmission In Wireless Cellular Networks

In this document, we study the result of multi hop relaying on the throughput of the downstream channel in cellular networks. In particular, we contrast the throughput of the multi hop method through that of the conventional cellular system, representing the feasible throughput development by the multi hop relaying under transitive transmission considerations. We moreover propose a hybrid control plan for the multi hop communicate, in which we activist the use of in cooperation, the straight transmission and the transitive multi hop relaying. Our study illustrates that the majority of the throughput gain can be obtained with the related of a transitive relaying scheme. Important throughput improvement could be moreover obtained by operating the simultaneous relaying transmission in conjunction with the non simultaneous transmission. We also disagree here that the multi hop relaying technology can be developed for mitigating injustice in qualityof- service (QoS), which arrive due to the location-dependent signal quality. Our outcomes demonstrate that the multi hop system can provide more even QoS over the cell district. The multi hop cellular system design can also be used as a selfconfiguring network mechanism that efficiently contains variability of traffic distribution. We have studied the throughput development for the consistent, as well as for the non uniform traffic distribution, and we conclude that the utilization of transitive relaying in cellular networks would be relatively robust to alter in the actual traffic distribution

Wireless Mesh Networks Based on MBPSO Algorithm to Improvement Throughput

Wireless Mesh Networks can be regarded as a type of communication technology in mesh topology in which wireless nodes interconnect with one another. Wireless Mesh Networks depending on the semi-static configuration in different paths among nodes such as PDR, E2E delay and throughput. This study summarized different types of previous heuristic algorithms in order to adapt with proper algorithm that could solve the issue. Therefore, the main objective of this study is to determine the proper methods, approaches or algorithms that should be adapted to improve the throughput. A Modified Binary Particle Swarm Optimization (MBPSO) approach was adapted to improvements the throughput. Finally, the finding shows that throughput increased by 5.79% from the previous study

Relay Technologies in IEEE 802.16j Mobile Multi-hop Relay (MMR) Networks

IEEE 802.16 standard is created to compete with cable access networks. In the beginning end users are immobile and have a line of sight with base station, now it moved to mobile non line of sight (NLOS) with the new standard IEEE 802.16e and IEEE 802.16j. The new IEEE 802.16j standard which is an amendment to IEEE 802.16e is mobile multi hop relay (MMR) specification for wireless networks. This paper discusses relay modes, relay transmission schemes and relay pairing schemes of IEEE 802.16j. Relay technologies such as transparent relay modes, non transparent relay mode, relay pairing schemes such as centralized relay pairing schemes, distributed relay pairing scheme, characterises of relay based networks such as throughput enhancement, capacity increase, cost reduction , relay techniques such as time domain frequency domain relay techniques and relay placement are also discussed in this paper. The paper also discusses about integration of IEEE 802.16j with IEEE 802.11. Keywords: IEEE 802.16j, Relay pairing schemes, relay techniques, Relay modes, WIMAX, NCTUns, et

Practical design of optimal wireless metropolitan area networks: model and algorithms for OFDMA networks

A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Ph.D.This thesis contributes to the study of the planning and optimisation of wireless metropolitan area networks, in particular to the access network design of OFDMAbased systems, where different parameters like base station position, antenna tilt and azimuth need to be configured during the early stages of the network life. A practical view for the solution of this problem is presented by means of the development of a novel design framework and the use of multicriteria optimisation. A further consideration of relaying and cooperative communications in the context of the design of this kind of networks is done, an area little researched. With the emergence of new technologies and services, it is very important to accurately identify the factors that affect the design of the wireless access network and define how to take them into account to achieve optimally performing and cost-efficient networks. The new features and flexibility of OFDMA networks seem particularly suited to the provision of different broadband services to metropolitan areas. However, until now, most existing efforts have been focused on the basic access capability networks. This thesis presents a way to deal with the trade-offs generated during the OFDMA access network design, and presents a service-oriented optimization framework that offers a new perspective for this process with consideration of the technical and economic factors. The introduction of relay stations in wireless metropolitan area networks will bring numerous advantages such as coverage extension and capacity enhancement due to the deployment of new cells and the reduction of distance between transmitter and receiver. However, the network designers will also face new challenges with the use of relay stations, since they involve a new source of interference and a complicated air interface; and this need to be carefully evaluated during the network design process. Contrary to the well known procedure of cellular network design over regular or hexagonal scenarios, the wireless network planning and optimization process aims to deal with the non-uniform characteristics of realistic scenarios, where the existence of hotspots, different channel characteristics for the users, or different service requirements will determine the final design of the wireless network. This thesis is structured in three main blocks covering important gaps in the existing literature in planning (efficient simulation) and optimisation. The formulation and ideas proposed in the former case can still be evaluated over regular scenarios, for the sake of simplicity, while the study of latter case needs to be done over specific scenarios that will be described when appropriate. Nevertheless, comments and conclusions are extrapolated to more general cases throughout this work. After an introduction and a description of the related work, this thesis first focuses on the study of models and algorithms for classical point-to-multipoint networks on Chapter 3, where the optimisation framework is proposed. Based on the framework, this work: - Identifies the technology-specific physical factors that affect most importantly the network system level simulation, planning and optimization process. - It demonstrates how to simplify the problem and translate it into a formal optimization routine with consideration of economic factors. - It provides the network provider, a detailed and clear description of different scenarios during the design process so that the most suitable solution can be found. Existing works on this area do not provide such a comprehensive framework. In Chapter 4: - The impact of the relay configuration on the network planning process is analysed. - A new simple and flexible scheme to integrate multihop communications in the Mobile WiMAX frame structure is proposed and evaluated. - Efficient capacity calculations that allow intensive system level simulations in a multihop environment are introduced. In Chapter 5: - An analysis of the optimisation procedure with the addition of relay stations and the derived higher complexity of the process is done. - A frequency plan procedure not found in the existing literature is proposed, which combines it with the use of the necessary frame fragmentation of in-band relay communications and cooperative procedures. - A novel joint two-step process for network planning and optimisation is proposed. Finally, conclusions and open issues are exposed

Fairness Time-Slot Allocation and Scheduling with QoS Guarantees in Multihop WiMAX Mesh Networks

The WiMAX technology has been defined to provide high throughput over long distance communications and support the quality of service (QoS) control applied on different applications. This paper studies the fairness time-slot allocation and scheduling problem for enhancing throughput and guaranteeing QoS in multihop WiMAX mesh networks. For allocating time slots to multiple subscribe stations (SSs), fairness is a key concern. The notion of max-min fairness is applied as our metric to define the QoS-based max-min fair scheduling problem for maximizing the minimum satisfaction ratio of each SS. We formulate an integer linear programming (ILP) model to provide an optimal solution on small-scale networks. For large-scale networks, several heuristic algorithms are proposed for better running time and scalability. The performance of heuristic algorithms is compared with previous methods in the literatures. Experimental results show that the proposed algorithms are better in terms of QoS satisfaction ratio and throughput