Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

Huawei HCIA-IoT v. 2.5 Evaluation Questions

Cours, école d'ingénieurThis document is oriented towards students preparing for the exam of Huawei Certified ICT Associate (HCIA-IoT) v. 2.5. The main idea of this booklet is to provide students with an evaluation tool for their understanding of the course content. This booklet is not an exam dump, and it should never be handled like that.HCIA-IoT is a course prepared provided by Huawei. It focuses on the Internet of things explaining the technologies used to support it, such as 5G and NB-IoT. It also introduces Huawei products and solutions in this domain.The structure of this document follows the chapters of the course. For each chapter, there are two groups of questions: True or False and Multiple choices questions. Additionally, the booklet includes a table for abbreviations used in this course in alphabetical order

D2.2 Draft Overall 5G RAN Design

This deliverable provides the consolidated preliminary view of the METIS-II partners on the 5 th generation (5G) radio access network (RAN) design at a mid-point of the project. The overall 5G RAN is envisaged to operate over a wide range of spectrum bands comprising of heterogeneous spectrum usage scenarios. More precisely, the 5G air interface (AI) is expected to be composed of multiple so-called AI variants (AIVs), which include evolved legacy technology such as Long Term Evolution Advanced (LTE-A) as well as novel AIVs, which may be tailored to particular services or frequency bands.Arnold, P.; Bayer, N.; Belschner, J.; Rosowski, T.; Zimmermann, G.; Ericson, M.; Da Silva, IL.... (2016). D2.2 Draft Overall 5G RAN Design. https://doi.org/10.13140/RG.2.2.17831.1424

Traffic Steering in Radio Level Integration of LTE and Wi-Fi Networks

A smartphone generates approximately 1, 614 MB of data per month which is 48 times of the data generated by a typical basic-feature cell phone. Cisco forecasts that the mobile data traffic growth will remain to increase and reach 49 Exabytes per month by 2021. However, the telecommunication service providers/operators face many challenges in order to improve cellular network capacity to match these ever-increasing data demands due to low, almost flat Average Revenue Per User (ARPU) and low Return on Investment (RoI). Spectrum resource crunch and licensing requirement for operation in cellular bands further complicate the procedure to support and manage the network. In order to deal with the aforementioned challenges, one of the most vital solutions is to leverage the integration benefits of cellular networks with unlicensed operation of Wi-Fi networks. A closer level of cellular and Wi-Fi coupling/interworking improves Quality of Service (QoS) by unified connection management to user devices (UEs). It also offloads a significant portion of user traffic from cellular Base Station (BS) to Wi-Fi Access Point (AP). In this thesis, we have considered the cellular network to be Long Term Evolution (LTE) popularly known as 4G-LTE for interworking with Wi-Fi. Third Generation Partnership Project (3GPP) defined various LTE and Wi-Fi interworking architectures from Rel-8 to Rel-11. Because of the limitations in these legacy LTE Wi-Fi interworking solutions, 3GPP proposed Radio Level Integration (RLI) architectures to enhance flow mobility and to react fast to channel dynamics. RLI node encompasses link level connection between Small cell deployments, (ii) Meeting Guaranteed Bit Rate (GBR) requirements of the users including those experiencing poor Signal to Interference plus Noise Ratio (SINR), and (iii) Dynamic steering of the flows across LTE and Wi-Fi links to maximize the system throughput. The second important problem addressed is the uplink traffic steering. To enable efficient uplink traffic steering in LWIP system, in this thesis, Network Coordination Function (NCF) is proposed. NCF is realized at the LWIP node by implementing various uplink traffic steering algorithms. NCF encompasses four different uplink traffic steering algorithms for efficient utilization of Wi-Fi resources in LWIP system. NCF facilitates the network to take intelligent decisions rather than individual UEs deciding to steer the uplink traffic onto LTE link or Wi-Fi link. The NCF algorithms work by leveraging the availability of LTE as the anchor to improvise the channel utilization of Wi-Fi. The third most important problem is to enable packet level steering in LWIP. When data rates of LTE and Wi-Fi links are incomparable, steering packets across the links create problems for TCP traffic. When the packets are received Out-of-Order (OOO) at the TCP receiver due to variation in delay experienced on each link, it leads to the generation of DUPlicate ACKnowledgements (DUP-ACK). These unnecessary DUP-ACKs adversely affect the TCP congestion window growth and thereby lead to poor TCP performance. This thesis addresses this problem by proposing a virtual congestion control mechanism (VIrtual congeStion control wIth Boost acknowLedgEment -VISIBLE). The proposed mechanism not only improves the throughput of a flow by reducing the number of unnecessary DUPACKs delivered to the TCP sender but also sends Boost ACKs in order to rapidly grow the congestion window to reap in aggregation benefits of heterogeneous links. The fourth problem considered is the placement of LWIP nodes. In this thesis, we have addressed problems pertaining to the dense deployment of LWIP nodes. LWIP deployment can be realized in colocated and non-colocated fashion. The placement of LWIP nodes is done with the following objectives: (i) Minimizing the number of LWIP nodes deployed without any coverage holes, (ii) Maximizing SINR in every sub-region of a building, and (iii) Minimizing the energy spent by UEs and LWIP nodes. Finally, prototypes of RLI architectures are presented (i.e., LWIP and LWA testbeds). The prototypes are developed using open source LTE platform OpenAirInterface (OAI) and commercial-off-the-shelf hardware components. The developed LWIP prototype is made to work with commercial UE (Nexus 5). The LWA prototype requires modification at the UE protocol stack, hence it is realized using OAI-UE. The developed prototypes are coupled with the legacy multipath protocol such as MPTCP to investigate the coupling benefits

Recent Advances in Cellular D2D Communications

Device-to-device (D2D) communications have attracted a great deal of attention from researchers in recent years. It is a promising technique for offloading local traffic from cellular base stations by allowing local devices, in physical proximity, to communicate directly with each other. Furthermore, through relaying, D2D is also a promising approach to enhancing service coverage at cell edges or in black spots. However, there are many challenges to realizing the full benefits of D2D. For one, minimizing the interference between legacy cellular and D2D users operating in underlay mode is still an active research issue. With the 5th generation (5G) communication systems expected to be the main data carrier for the Internet-of-Things (IoT) paradigm, the potential role of D2D and its scalability to support massive IoT devices and their machine-centric (as opposed to human-centric) communications need to be investigated. New challenges have also arisen from new enabling technologies for D2D communications, such as non-orthogonal multiple access (NOMA) and blockchain technologies, which call for new solutions to be proposed. This edited book presents a collection of ten chapters, including one review and nine original research works on addressing many of the aforementioned challenges and beyond

View on 5G Architecture: Version 2.0

The 5G Architecture Working Group as part of the 5GPPP Initiative is looking at capturing novel trends and key technological enablers for the realization of the 5G architecture. It also targets at presenting in a harmonized way the architectural concepts developed in various projects and initiatives (not limited to 5GPPP projects only) so as to provide a consolidated view on the technical directions for the architecture design in the 5G era. The first version of the white paper was released in July 2016, which captured novel trends and key technological enablers for the realization of the 5G architecture vision along with harmonized architectural concepts from 5GPPP Phase 1 projects and initiatives. Capitalizing on the architectural vision and framework set by the first version of the white paper, this Version 2.0 of the white paper presents the latest findings and analyses with a particular focus on the concept evaluations, and accordingly it presents the consolidated overall architecture design

AN EFFICIENT INTERFERENCE AVOIDANCE SCHEME FOR DEVICE-TODEVICE ENABLED FIFTH GENERATION NARROWBAND INTERNET OF THINGS NETWOKS’

Narrowband Internet of Things (NB-IoT) is a low-power wide-area (LPWA) technology built on long-term evolution (LTE) functionalities and standardized by the 3rd-Generation Partnership Project (3GPP). Due to its support for massive machine-type communication (mMTC) and different IoT use cases with rigorous standards in terms of connection, energy efficiency, reachability, reliability, and latency, NB-IoT has attracted the research community. However, as the capacity needs for various IoT use cases expand, the LTE evolved packet core (EPC) system's numerous functionalities may become overburdened and suboptimal. Several research efforts are currently in progress to address these challenges. As a result, an overview of these efforts with a specific focus on the optimized architecture of the LTE EPC functionalities, the 5G architectural design for NB-IoT integration, the enabling technologies necessary for 5G NB-IoT, 5G new radio (NR) coexistence with NB-IoT, and feasible architectural deployment schemes of NB-IoT with cellular networks is discussed. This thesis also presents cloud-assisted relay with backscatter communication as part of a detailed study of the technical performance attributes and channel communication characteristics from the physical (PHY) and medium access control (MAC) layers of the NB-IoT, with a focus on 5G. The numerous drawbacks that come with simulating these systems are explored. The enabling market for NB-IoT, the benefits for a few use cases, and the potential critical challenges associated with their deployment are all highlighted. Fortunately, the cyclic prefix orthogonal frequency division multiplexing (CPOFDM) based waveform by 3GPP NR for improved mobile broadband (eMBB) services does not prohibit the use of other waveforms in other services, such as the NB-IoT service for mMTC. As a result, the coexistence of 5G NR and NB-IoT must be manageably orthogonal (or quasi-orthogonal) to minimize mutual interference that limits the form of freedom in the waveform's overall design. As a result, 5G coexistence with NB-IoT will introduce a new interference challenge, distinct from that of the legacy network, even though the NR's coexistence with NB-IoT is believed to improve network capacity and expand the coverage of the user data rate, as well as improves robust communication through frequency reuse. Interference challenges may make channel estimation difficult for NB-IoT devices, limiting the user performance and spectral efficiency. Various existing interference mitigation solutions either add to the network's overhead, computational complexity and delay or are hampered by low data rate and coverage. These algorithms are unsuitable for an NB-IoT network owing to the low-complexity nature. As a result, a D2D communication based interference-control technique becomes an effective strategy for addressing this problem. This thesis used D2D communication to decrease the network bottleneck in dense 5G NBIoT networks prone to interference. For D2D-enabled 5G NB-IoT systems, the thesis presents an interference-avoidance resource allocation that considers the less favourable cell edge NUEs. To simplify the algorithm's computing complexity and reduce interference power, the system divides the optimization problem into three sub-problems. First, in an orthogonal deployment technique using channel state information (CSI), the channel gain factor is leveraged by selecting a probable reuse channel with higher QoS control. Second, a bisection search approach is used to find the best power control that maximizes the network sum rate, and third, the Hungarian algorithm is used to build a maximum bipartite matching strategy to choose the optimal pairing pattern between the sets of NUEs and the D2D pairs. The proposed approach improves the D2D sum rate and overall network SINR of the 5G NB-IoT system, according to the numerical data. The maximum power constraint of the D2D pair, D2D's location, Pico-base station (PBS) cell radius, number of potential reuse channels, and cluster distance impact the D2D pair's performance. The simulation results achieve 28.35%, 31.33%, and 39% SINR performance higher than the ARSAD, DCORA, and RRA algorithms when the number of NUEs is twice the number of D2D pairs, and 2.52%, 14.80%, and 39.89% SINR performance higher than the ARSAD, RRA, and DCORA when the number of NUEs and D2D pairs are equal. As a result, a D2D sum rate increase of 9.23%, 11.26%, and 13.92% higher than the ARSAD, DCORA, and RRA when the NUE’s number is twice the number of D2D pairs, and a D2D’s sum rate increase of 1.18%, 4.64% and 15.93% higher than the ARSAD, RRA and DCORA respectively, with an equal number of NUEs and D2D pairs is achieved. The results demonstrate the efficacy of the proposed scheme. The thesis also addressed the problem where the cell-edge NUE's QoS is critical to challenges such as long-distance transmission, delays, low bandwidth utilization, and high system overhead that affect 5G NB-IoT network performance. In this case, most cell-edge NUEs boost their transmit power to maximize network throughput. Integrating cooperating D2D relaying technique into 5G NB-IoT heterogeneous network (HetNet) uplink spectrum sharing increases the system's spectral efficiency and interference power, further degrading the network. Using a max-max SINR (Max-SINR) approach, this thesis proposed an interference-aware D2D relaying strategy for 5G NB-IoT QoS improvement for a cell-edge NUE to achieve optimum system performance. The Lagrangian-dual technique is used to optimize the transmit power of the cell-edge NUE to the relay based on the average interference power constraint, while the relay to the NB-IoT base station (NBS) employs a fixed transmit power. To choose an optimal D2D relay node, the channel-to-interference plus noise ratio (CINR) of all available D2D relays is used to maximize the minimum cell-edge NUE's data rate while ensuring the cellular NUEs' QoS requirements are satisfied. Best harmonic mean, best-worst, half-duplex relay selection, and a D2D communication scheme were among the other relaying selection strategies studied. The simulation results reveal that the Max-SINR selection scheme outperforms all other selection schemes due to the high channel gain between the two communication devices except for the D2D communication scheme. The proposed algorithm achieves 21.27% SINR performance, which is nearly identical to the half-duplex scheme, but outperforms the best-worst and harmonic selection techniques by 81.27% and 40.29%, respectively. As a result, as the number of D2D relays increases, the capacity increases by 14.10% and 47.19%, respectively, over harmonic and half-duplex techniques. Finally, the thesis presents future research works on interference control in addition with the open research directions on PHY and MAC properties and a SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis presented in Chapter 2 to encourage further study on 5G NB-IoT

Enhanced mobility management mechanisms for 5G networks

Many mechanisms that served the legacy networks till now, are being identified as being grossly sub-optimal for 5G networks. The reason being, the increased complexity of the 5G networks compared previous legacy systems. One such class of mechanisms, important for any wireless standard, is the Mobility Management (MM) mechanisms. MM mechanismsensure the seamless connectivity and continuity of service for a user when it moves away from the geographic location where it initially got attached to the network. In this thesis, we firstly present a detailed state of the art on MM mechanisms. Based on the 5G requirements as well as the initial discussions on Beyond 5G networks, we provision a gap analysis for the current technologies/solutions to satisfy the presented requirements. We also define the persistent challenges that exist concerning MM mechanisms for 5G and beyond networks. Based on these challenges, we define the potential solutions and a novel framework for the 5G and beyond MM mechanisms. This framework specifies a set of MM mechanisms at the access, core and the extreme edge network (users/devices) level, that will help to satisfy the requirements for the 5G and beyond MM mechanisms. Following this, we present an on demand MM service concept. Such an on-demand feature provisions the necessary reliability, scalability and flexibility to the MM mechanisms. It's objective is to ensure that appropriate resources and mobility contexts are defined for users who will have heterogeneous mobility profiles, versatile QoS requirements in a multi-RAT network. Next, in this thesis we tackle the problem of core network signaling that occurs during MM in 5G/4G networks. A novel handover signaling mechanism has been developed, which eliminates unnecessary handshakes during the handover preparation phase, while allowing the transition to future softwarized network architectures. We also provide a handover failure aware handover preparation phase signaling process. We then utilize operator data and a realistic network deployment to perform a comparative analysis of the proposed strategy and the 3GPP handover signaling strategy on a network wide deployment scenario. We show the benefits of our strategy in terms of latency of handover process, and the transmission and processing cost incurred. Lastly, a novel user association and resource allocation methodology, namely AURA-5G, has been proposed. AURA-5G addresses scenarios wherein applications with heterogeneous requirements, i.e., enhanced Mobile Broadband (eMBB) and massive Machine Type Communications (mMTC), are present simultaneously. Consequently, a joint optimization process for performing the user association and resource allocation while being cognizant of heterogeneous application requirements, has been performed. We capture the peculiarities of this important mobility management process through the various constraints, such as backhaul requirements, dual connectivity options, available access resources, minimum rate requirements, etc., that we have imposed on a Mixed Integer Linear Program (MILP). The objective function of this established MILP problem is to maximize the total network throughput of the eMBB users, while satisfying the minimum requirements of the mMTC and eMBB users defined in a given scenario. Through numerical evaluations we show that our approach outperforms the baseline user association scenario significantly. Moreover, we have presented a system fairness analysis, as well as a novel fidelity and computational complexity analysis for the same, which express the utility of our methodology given the myriad network scenarios.Muchos mecanismos que sirvieron en las redes actuales, se están identificando como extremadamente subóptimos para las redes 5G. Esto es debido a la mayor complejidad de las redes 5G. Un tipo de mecanismo importante para cualquier estándar inalámbrico, consiste en el mecanismo de gestión de la movilidad (MM). Los mecanismos MM aseguran la conectividad sin interrupciones y la continuidad del servicio para un usuario cuando éste se aleja de la ubicación geográfica donde inicialmente se conectó a la red. En esta tesis, presentamos, en primer lugar, un estado del arte detallado de los mecanismos MM. Bas ándonos en los requisitos de 5G, así como en las discusiones iniciales sobre las redes Beyond 5G, proporcionamos un análisis de las tecnologías/soluciones actuales para satisfacer los requisitos presentados. También definimos los desafíos persistentes que existen con respecto a los mecanismos MM para redes 5G y Beyond 5G. En base a estos desafíos, definimos las posibles soluciones y un marco novedoso para los mecanismos 5G y Beyond 5G de MM. Este marco especifica un conjunto de mecanismos MM a nivel de red acceso, red del núcleo y extremo de la red (usuarios/dispositivos), que ayudarán a satisfacer los requisitos para los mecanismos MM 5G y posteriores. A continuación, presentamos el concepto de servicio bajo demanda MM. Tal característica proporciona la confiabilidad, escalabilidad y flexibilidad necesarias para los mecanismos MM. Su objetivo es garantizar que se definan los recursos y contextos de movilidad adecuados para los usuarios que tendrán perfiles de movilidad heterogéneos, y requisitos de QoS versátiles en una red multi-RAT. Más adelante, abordamos el problema de la señalización de la red troncal que ocurre durante la gestión de la movilidad en redes 5G/4G. Se ha desarrollado un nuevo mecanismo de señalización de handover, que elimina los intercambios de mensajes innecesarios durante la fase de preparación del handover, al tiempo que permite la transición a futuras arquitecturas de red softwarizada. Utilizamos los datos de operadores y consideramos un despliegue de red realista para realizar un análisis comparativo de la estrategia propuesta y la estrategia de señalización de 3GPP. Mostramos los beneficios de nuestra estrategia en términos de latencia del proceso de handover y los costes de transmisión y procesado. Por último, se ha propuesto una nueva asociación de usuarios y una metodología de asignación de recursos, i.e, AURA-5G. AURA-5G aborda escenarios en los que las aplicaciones con requisitos heterogéneos, i.e., enhanced Mobile Broadband (eMBB) y massive Machine Type Communications (mMTC), están presentes simultáneamente. En consecuencia, se ha llevado a cabo un proceso de optimización conjunta para realizar la asociación de usuarios y la asignación de recursos mientras se tienen en cuenta los requisitos de aplicaciónes heterogéneas. Capturamos las peculiaridades de este importante proceso de gestión de la movilidad a través de las diversas restricciones impuestas, como son los requisitos de backhaul, las opciones de conectividad dual, los recursos de la red de acceso disponibles, los requisitos de velocidad mínima, etc., que hemos introducido en un Mixed Integer Linear Program (MILP). La función objetivo de este problema MILP es maximizar el rendimiento total de la red de los usuarios de eMBB, y a la vez satisfacer los requisitos mínimos de los usuarios de mMTC y eMBB definidos en un escenario dado. A través de evaluaciones numéricas, mostramos que nuestro enfoque supera significativamente el escenario de asociación de usuarios de referencia. Además, hemos presentado un análisis de la justicia del sistema, así como un novedoso análisis de fidelidad y complejidad computacional para el mismo, que expresa la utilidad de nuestra metodología