Factoring out ordered sections to expose thread-level parallelism

With the rise of multi-core processors, researchers are taking a new look at extending the applicability auto-parallelization techniques. In this paper, we identify a dependence pattern on which autoparallelization currently fails. This dependence pattern occurs for ordered sections, i.e. code fragments in a loop that must be executed atomically and in original program order. We discuss why these ordered sections prohibit current auto-parallelizers from working and we present a technique to deal with them. We experimentally demonstrate the efficacy of the technique, yielding significant overall program speedups

On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast

FlexVC: Flexible virtual channel management in low-diameter networks

Deadlock avoidance mechanisms for lossless lowdistance networks typically increase the order of virtual channel (VC) index with each hop. This restricts the number of buffer resources depending on the routing mechanism and limits performance due to an inefficient use. Dynamic buffer organizations increase implementation complexity and only provide small gains in this context because a significant amount of buffering needs to be allocated statically to avoid congestion. We introduce FlexVC, a simple buffer management mechanism which permits a more flexible use of VCs. It combines statically partitioned buffers, opportunistic routing and a relaxed distancebased deadlock avoidance policy. FlexVC mitigates Head-of-Line blocking and reduces up to 50% the memory requirements. Simulation results in a Dragonfly network show congestion reduction and up to 37.8% throughput improvement, outperforming more complex dynamic approaches. FlexVC merges different flows of traffic in the same buffers, which in some cases makes more difficult to identify the traffic pattern in order to support nonminimal adaptive routing. An alternative denoted FlexVCminCred improves congestion sensing for adaptive routing by tracking separately packets routed minimally and nonminimally, rising throughput up to 20.4% with 25% savings in buffer area.This work has been supported by the Spanish Government (grant SEV2015-0493 of the Severo Ochoa Program), the Spanish Ministry of Economy, Industry and Competitiveness (contracts TIN2015-65316), the Spanish Research Agency (AEI/FEDER, UE - TIN2016-76635-C2-2-R), the Spanish Ministry of Education (FPU grant FPU13/00337), the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014- SGR-1272), the European Union FP7 programme (RoMoL ERC Advanced Grant GA 321253), the European HiPEAC Network of Excellence and the European Union’s Horizon 2020 research and innovation programme (Mont-Blanc project under grant agreement No 671697).Peer ReviewedPostprint (author's final draft

Deploying Hard Real-Time Control Software on Chip-Multiprocessors

Abstract—Deploying real-time control systems software on multiprocessors requires distributing tasks on multiple processing nodes and coordinating their executions using a protocol. One such protocol is the discrete-event (DE) model of computation. In this paper, we investigate distributed discrete-event (DE) with null-message protocol (NMP) on a multicore system for real-time control software. We illustrate analytically and experimentally that even with the null-message deadlock avoidance scheme in the protocol, the system can deadlock due to inter-core message dependencies. We identify two central reasons for such deadlocks: 1) the lack of an upper-bound on packet transmission rates and processing capability, and 2) an unknown upper-bound on the communication network delay. To address these, we propose using architectural features such as timing control and real-time network-on-chips to prevent such message-dependent deadlocks. We employ these architectural techniques in conjunction with a distributed DE strategy called PTIDES for an illustrative car wash station example and later follow it with a more realistic tunnelling ball device application

Embedded dynamic programming networks for networks-on-chip

PhD ThesisRelentless technology downscaling and recent technological advancements in three dimensional integrated circuit (3D-IC) provide a promising prospect to realize heterogeneous system-on-chip (SoC) and homogeneous chip multiprocessor (CMP) based on the networks-onchip (NoCs) paradigm with augmented scalability, modularity and performance. In many cases in such systems, scheduling and managing communication resources are the major design and implementation challenges instead of the computing resources. Past research efforts were mainly focused on complex design-time or simple heuristic run-time approaches to deal with the on-chip network resource management with only local or partial information about the network. This could yield poor communication resource utilizations and amortize the benefits of the emerging technologies and design methods. Thus, the provision for efficient run-time resource management in large-scale on-chip systems becomes critical. This thesis proposes a design methodology for a novel run-time resource management infrastructure that can be realized efficiently using a distributed architecture, which closely couples with the distributed NoC infrastructure. The proposed infrastructure exploits the global information and status of the network to optimize and manage the on-chip communication resources at run-time. There are four major contributions in this thesis. First, it presents a novel deadlock detection method that utilizes run-time transitive closure (TC) computation to discover the existence of deadlock-equivalence sets, which imply loops of requests in NoCs. This detection scheme, TC-network, guarantees the discovery of all true-deadlocks without false alarms in contrast to state-of-the-art approximation and heuristic approaches. Second, it investigates the advantages of implementing future on-chip systems using three dimensional (3D) integration and presents the design, fabrication and testing results of a TC-network implemented in a fully stacked three-layer 3D architecture using a through-silicon via (TSV) complementary metal-oxide semiconductor (CMOS) technology. Testing results demonstrate the effectiveness of such a TC-network for deadlock detection with minimal computational delay in a large-scale network. Third, it introduces an adaptive strategy to effectively diffuse heat throughout the three dimensional network-on-chip (3D-NoC) geometry. This strategy employs a dynamic programming technique to select and optimize the direction of data manoeuvre in NoC. It leads to a tool, which is based on the accurate HotSpot thermal model and SystemC cycle accurate model, to simulate the thermal system and evaluate the proposed approach. Fourth, it presents a new dynamic programming-based run-time thermal management (DPRTM) system, including reactive and proactive schemes, to effectively diffuse heat throughout NoC-based CMPs by routing packets through the coolest paths, when the temperature does not exceed chip’s thermal limit. When the thermal limit is exceeded, throttling is employed to mitigate heat in the chip and DPRTM changes its course to avoid throttled paths and to minimize the impact of throttling on chip performance. This thesis enables a new avenue to explore a novel run-time resource management infrastructure for NoCs, in which new methodologies and concepts are proposed to enhance the on-chip networks for future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)

Interaction of NoC design and coherence protocol in 3D-Stacked CMPs

n/

Designing Routing and Message-Dependent Deadlock Free Networks on Chips

Networks on Chip (NoC) has emerged as the paradigm for designing scalable communication architecture for Systems on Chips (SoCs). Avoiding the conditions that can lead to deadlocks in the network is critical for using NoCs in real designs. Methods that can lead to deadlock-free operation with minimum power and area overhead are important for designing application-specific NoCs. The deadlocks that can occur in NoCs can be broadly categorized into two classes: routing-dependent deadlocks and message-dependent deadlocks. In this work, we present methods to design NoCs that avoid both types of deadlocks. The methods are integrated with the topology synthesis phase of the NoC design flow. We show that by considering the deadlock avoidance issue during topology synthesis, we can obtain a significantly better NoC design than traditional methods, where the deadlock avoidance issue is dealt with separately. Our experiments on several SoC benchmarks show that our proposed scheme provides large reduction in NoC power consumption (an average of 38.5%) and NoC area (an average of 30.7%) when compared to traditional approaches

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems