A VLSI synthesis of a Reed-Solomon processor for digital communication systems

The Reed-Solomon codes have been widely used in digital communication systems such as computer networks, satellites, VCRs, mobile communications and high- definition television (HDTV), in order to protect digital data against erasures, random and burst errors during transmission. Since the encoding and decoding algorithms for such codes are computationally intensive, special purpose hardware implementations are often required to meet the real time requirements. -- One motivation for this thesis is to investigate and introduce reconfigurable Galois field arithmetic structures which exploit the symmetric properties of available architectures. Another is to design and implement an RS encoder/decoder ASIC which can support a wide family of RS codes. -- An m-programmable Galois field multiplier which uses the standard basis representation of the elements is first introduced. It is then demonstrated that the exponentiator can be used to implement a fast inverter which outperforms the available inverters in GF(2m). Using these basic structures, an ASIC design and synthesis of a reconfigurable Reed-Solomon encoder/decoder processor which implements a large family of RS codes is proposed. The design is parameterized in terms of the block length n, Galois field symbol size m, and error correction capability t for the various RS codes. The design has been captured using the VHDL hardware description language and mapped onto CMOS standard cells available in the 0.8-µm BiCMOS design kits for Cadence and Synopsys tools. The experimental chip contains 218,206 logic gates and supports values of the Galois field symbol size m = 3,4,5,6,7,8 and error correction capability t = 1,2,3, ..., 16. Thus, the block length n is variable from 7 to 255. Error correction t and Galois field symbol size m are pin-selectable. -- Since low design complexity and high throughput are desired in the VLSI chip, the algebraic decoding technique has been investigated instead of the time or transform domain. The encoder uses a self-reciprocal generator polynomial which structures the codewords in a systematic form. At the beginning of the decoding process, received words are initially stored in the first-in-first-out (FIFO) buffer as they enter the syndrome module. The Berlekemp-Massey algorithm is used to determine both the error locator and error evaluator polynomials. The Chien Search and Forney's algorithms operate sequentially to solve for the error locations and error values respectively. The error values are exclusive or-ed with the buffered messages in order to correct the errors, as the processed data leave the chip

General method of synthesis by PLIC/FPGA digital devices to perform discrete orthogonal transformations

A general method is proposed to synthesize digital devices in order to perform discrete orthogonal transformations (DOT) on programmable logic integrated circuits (PLIC) of FPGA class. The basic and the most "slow" operation during DOT performance is the operation of multiplying by a constant factor (constant) - OMC. To perform DOT digital devices are implemented at the use of the same type of IP-cores, which allow to realize OMC. According to the proposed method, OMC is determined on the basis of picturing set over the elements of the Galois field. Due to the distributed computing of nonlinear polynomial function systems defined over the Galois field in PLIC/FPGA architecture, the reduction in the estimates of time complexity concerning OMC performance is achieved. Each non-linear polynomial function, like OMC, is realized on the basis of the same type of IP-cores according to one of the structural schemes in accordance with the requirements for the device to perform DOT. The use of IP cores significantly reduces the cost of designing a device that implements DOT in the PLIC/FPGA architecture.Keywords: digital signal processing, discrete orthogonal transformations, distributed computing, nonlinear polynomial functions, Galois fields, FPGAs, digital device

Speeding up a scalable modular inversion hardware architecture

The modular inversion is a fundamental process in several cryptographic systems. It can be computed in software or hardware, but hardware computation proven to be faster and more secure. This research focused on improving an old scalable inversion hardware architecture proposed in 2004 for finite field GF(p). The architecture has been made of two parts, a computing unit and a memory unit. The memory unit is to hold all the data bits of computation whereas the computing unit performs all the arithmetic operations in word (digit) by word bases known as scalable method. The main objective of this project was to investigate the cost and benefit of modifying the memory unit to include parallel shifting, which was one of the tasks of the scalable computing unit. The study included remodeling the entire hardware architecture removing the shifter from the scalable computing part embedding it in the memory unit instead. This modification resulted in a speedup to the complete inversion process with an area increase due to the new memory shifting unit. Quantitative measurements of the speed area trade-off have been investigated. The results showed that the extra hardware to be added for this modification compared to the speedup gained, giving the user the complete picture to choose from depending on the application need.the British council in Saudi Arabia, KFUPM, Dr. Tatiana Kalganova at the Electrical & Computer Engineering Department of Brunel University in Uxbridg

High Speed Hardware Architecture to Compute GF(p) Montgomery Inversion with Scalability Features

Modular inversion is a fundamental process in several cryptographic systems. It can be computed in software or hardware, but hardware computation has been proven to be faster and more secure. This research focused on improving an old scalable inversion hardware architecture proposed in 2004 for finite field GF(p). The architecture comprises two parts, a computing unit and a memory unit. The memory unit holds all the data bits of computation whereas the computing unit performs all the arithmetic operations in word (digit) by word bases such that the design is scalable. The main objective of this paper is to show the cost and benefit of modifying the memory unit to include shifting, which was previously one of the tasks of the scalable computing unit. The study included remodeling the entire hardware architecture removing the shifter from the scalable computing part and embedding it in the non-scalable memory unit instead. This modification resulted in a speedup to the complete inversion process with an area increase due to the new memory shifting unit. Several design schemes have been compared giving the user the complete picture to choose from depending on the application need

Bit Serial Systolic Architectures for Multiplicative Inversion and Division over GF(2^m)

Systolic architectures are capable of achieving high throughput by maximizing pipelining and by eliminating global data interconnects. Recursive algorithms with regular data flows are suitable for systolization. The computation of multiplicative inversion using algorithms based on EEA (Extended Euclidean Algorithm) are particularly suitable for systolization. Implementations based on EEA present a high degree of parallelism and pipelinability at bit level which can be easily optimized to achieve local data flow and to eliminate the global interconnects which represent most important bottleneck in todays sub-micron design process. The net result is to have high clock rate and performance based on efficient systolic architectures. This thesis examines high performance but also scalable implementations of multiplicative inversion or field division over Galois fields GF(2m) in the specific case of cryptographic applications where field dimension m may be very large (greater than 400) and either m or defining irreducible polynomial may vary. For this purpose, many inversion schemes with different basis representation are studied and most importantly variants of EEA and binary (Stein's) GCD computation implementations are reviewed. A set of common as well as contrasting characteristics of these variants are discussed. As a result a generalized and optimized variant of EEA is proposed which can compute division, and multiplicative inversion as its subset, with divisor in either polynomial or triangular basis representation. Further results regarding Hankel matrix formation for double-basis inversion is provided. The validity of using the same architecture to compute field division with polynomial or triangular basis representation is proved. Next, a scalable unidirectional bit serial systolic array implementation of this proposed variant of EEA is implemented. Its complexity measures are defined and these are compared against the best known architectures. It is shown that assuming the requirements specified above, this proposed architecture may achieve a higher clock rate performance w. r. t. other designs while being more flexible, reliable and with minimum number of inter-cell interconnects. The main contribution at system level architecture is the substitution of all counter or adder/subtractor elements with a simpler distributed and free of carry propagation delays structure. Further a novel restoring mechanism for result sequences of EEA is proposed using a double delay element implementation. Finally, using this systolic architecture a CMD (Combined Multiplier Divider) datapath is designed which is used as the core of a novel systolic elliptic curve processor. This EC processor uses affine coordinates to compute scalar point multiplication which results in having a very small control unit and negligible with respect to the datapath for all practical values of m. The throughput of this EC based on this bit serial systolic architecture is comparable with designs many times larger than itself reported previously

Architectural Solutions for NanoMagnet Logic

The successful era of CMOS technology is coming to an end. The limit on minimum fabrication dimensions of transistors and the increasing leakage power hinder the technological scaling that has characterized the last decades. In several different ways, this problem has been addressed changing the architectures implemented in CMOS, adopting parallel processors and thus increasing the throughput at the same operating frequency. However, architectural alternatives cannot be the definitive answer to a continuous increase in performance dictated by Moore’s law. This problem must be addressed from a technological point of view. Several alternative technologies that could substitute CMOS in next years are currently under study. Among them, magnetic technologies such as NanoMagnet Logic (NML) are interesting because they do not dissipate any leakage power. More- over, magnets have memory capability, so it is possible to merge logic and memory in the same device. However, magnetic circuits, and NML in this specific research, have also some important drawbacks that need to be addressed: first, the circuit clock frequency is limited to 100 MHz, to avoid errors in data propagation; second, there is a connection between circuit layout and timing, and in particular, longer wires will have longer latency. These drawbacks are intrinsic to the technology and for this reason they cannot be avoided. The only chance is to limit their impact from an architectural point of view. The first step followed in the research path of this thesis is indeed the choice and optimization of architectures able to deal with the problems of NML. Systolic Ar- rays are identified as an ideal solution for this technology, because they are regular structures with local interconnections that limit the long latency of wires; more- over they are composed of several Processing Elements that work in parallel, thus exploit parallelization to increase throughput (limiting the impact of the low clock frequency). Through the analysis of Systolic Arrays for NML, several possible im- provements have been identified and addressed: 1) it has been defined a rigorous way to increase throughput with interleaving, providing equations that allow to esti- mate the number of operations to be interleaved and the rules to provide inputs; 2) a latency insensitive circuit has been designed, that exploits a data communication protocol between processing elements to avoid data synchronization problems. This feature has been exploited to design a latency insensitive Systolic Array that is able to execute the Floyd-Steinberg dithering algorithm. All the improvements presented in this framework apply to Systolic Arrays implemented in any technology. So, they can also be exploited to increase performance of today’s CMOS parallel circuits. This research path is presented in Chapter 3. While Systolic Arrays are an interesting solution for NML, their usage could be quite limited because they are normally application-specific. The second re- search path addresses this problem. A Reconfigurable Systolic Array is presented, that can be programmed to execute several algorithms. This architecture has been tested implementing many algorithms, including FIR and IIR filters, Discrete Cosine Transform and Matrix Multiplication. This research path is presented in Chapter 4. In common Von Neumann architectures, the logic part of the circuit and the memory one are separated. Today bus communication between logic and memory represents the bottleneck of the system. This problem is addressed presenting Logic- In-Memory (LIM), an architecture where memory elements are merged in logic ones. This research path aims at defining a real LIM architectures. This has been done in two steps. The first step is represented by an architecture composed of three layers: memory, routing and logic. In the second step instead the routing plane is no more present, and its features are inherited by the memory plane. In this solution, a pyramidal memory model is used, where memories near logic elements contain the most probably used data, and other memory layers contain the remaining data and instruction set. This circuit has been tested with odd-even sort algorithms and it has been benchmarked against GPUs and ASIC. This research path is presented in Chapter 5. MagnetoElastic NML (ME-NML) is a technological improvement of the NML principle, proposed by researchers of Politecnico di Torino, where the clock system is based on the induced stretch of a piezoelectric substrate when a voltage is ap- plied to its boundaries. The main advantage of this solution is that it consumes much less power than the classic clock implementation. This technology has not yet been investigated from an architectural point of view and considering complex circuits. In this research field, a standard methodology for the design of ME-NML circuits has been proposed. It is based on a Standard Cell Library and an enhanced VHDL model. The effectiveness of this methodology has been proved designing a Galois Field Multiplier. Moreover the serial-parallel trade-off in ME-NML has been investigated, designing three different solutions for the Multiply and Accumulate structure. This research path is presented in Chapter 6. While ME-NML is an extremely interesting technology, it needs to be combined with other faster technologies to have a real competitive system. Signal interfaces between NML and other technologies (mainly CMOS) have been rarely presented in literature. A mixed-technology multiplexer is designed and presented as the basis for a CMOS to NML interface. The reverse interface (from ME-NML to CMOS) is instead based on a sensing circuit for the Faraday effect: a change in the polarization of a magnet induces an electric field that can be used to generate an input signal for a CMOS circuit. This research path is presented in Chapter 7. The research work presented in this thesis represents a fundamental milestone in the path towards nanotechnologies. The most important achievement is the de- sign and simulation of complex circuits with NML, benchmarking this technology with real application examples. The characterization of a technology considering complex functions is a major step to be performed and that has not yet been ad- dressed in literature for NML. Indeed, only in this way it is possible to intercept in advance any weakness of NanoMagnet Logic that cannot be discovered consid- ering only small circuits. Moreover, the architectural improvements introduced in this thesis, although technology-driven, can be actually applied to any technology. We have demonstrated the advantages that can derive applying them to CMOS cir- cuits. This thesis represents therefore a major step in two directions: the first is the enhancement of NML technology; the second is a general improvement of parallel architectures and the development of the new Logic-In-Memory paradigm

Implementation of Elliptic Curve Crypto Processor and Its Performance Analysis

ECDSA stands for "Elliptic Curve Digital Signature Algorithm", its used to create a digital signature of data (a file for example) in order to allow you toverify its authenticity without compromising its security. This paper presents the architecture of finite field multiplication. The proposed multiplier is hybrid Karatsuba multiplier used in this processor. For multiplicative inverse we choose the Itoh-Tsujii Algorithm (ITA). This work presents the design of high performance elliptic curve crypto processor (ECCP) for an elliptic curve over the finite field GF (2^233). The curve which we choose is the standard curve for the digital signature. The processor is synthesized for Xilinx FPGA

Towards a triple mode common operator FFT for Software Radio systems

International audienceA scenario to design a Triple Mode FFT is addressed. Based on a Dual Mode FFT structure, we present a methodology to reach a triple mode FFT operator (TMFFT) able to operate over three different fields: complex number domain C, Galois Fields GF(Ft) and GF(2m). We propose a reconfigurable Triple mode Multiplier that constitutes the core of the Butterflybased FFT. A scalable and flexible unit for the polynomial reduction needed in the GF(2m) multiplication is also proposed. An FPGA implementation of the proposed multiplier is given and the measures show a gain of 18%in terms of performance-to-cost ratio compared to a "Velcro" approach where two self-contained operators are implemented separately