Medium access control and network planning in wireless networks

Wireless Local Area Networks (WLANs) and Wireless Metropolitan Area Networks (WMANs) are two of the main technologies in wireless data networks. WLANs have a short range and aim at providing connectivity to end users. On the other hand, WMANs have a long range and aim at serving as a backbone network and also at serving end users. In this dissertation, we consider the problem of Medium Access Control (MAC) in WLANs and the placement of Relay Stations (RSs) in WMANs. We propose a MAC scheme for WLANs in which stations contend by using jams on the channel. We present analytic and simulation results to find the optimal parameters of the scheme and measure its performance. Our scheme has a low collision rate and delay and a high throughput and fairness performance. Secondly, we present a MAC scheme for the latest generation of WLANs which have very high data rates. In this scheme, we divide the stations into groups and only one station from each group contends to the channel. We also use frame aggregation to reduce the overhead. We present analytic and simulation results which show that our scheme provides a small collision rate and, hence, achieves a high throughput. The results also show that our scheme provides a delay performance that is suitable for real-time applications and also has a high level of fairness. Finally, we consider the problem of placing Relay Stations (RSs) in WMANs. We consider the Worldwide Interoperability for Microwave Access (WIMAX) technology. The RSs are used to increase the capacity of the network and to extend its range. We present an optimization formulation that places RSs in the WiMAX network to serve a number of customers with a pre-defined bit rate. Our solution also provides fault-tolerance by allowing one RS to fail at a given time so that the performance to the users remains at a predictable level. The goal of our solution is to meet the demands of the users, provide fault-tolerance and minimize the number of RSs used

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Design and optimization of QoS-based medium access control protocols for next-generation wireless LANs

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In recent years, there have been tremendous advances in wireless & mobile communications, including wireless radio techniques, networking protocols, and mobile devices. It is expected that different broadband wireless access technologies, e.g., WiFi (IEEE 802.11) and WiMAX (IEEE 802.16) will coexist in the future. In the meantime, multimedia applications have experienced an explosive growth with increasing user demands. Nowadays, people expect to receive high-speed video, audio, voice and web services even when being mobile. The key question that needs to be answered, then, is how do we ensure that users always have the "best" network performance with the "lowest" costs in such complicated situations? The latest IEEE 802.11n standards attains rates of more than 100 Mbps by introducing innovative enhancements at the PHY and MAC layer, e.g. MIMO and Frame Aggregation, respectively. However, in this thesis we demonstrate that frame aggregation's performance adheres due to the EDCA scheduler's priority mechanism and consequently resulting in the network's poor overall performance. Short waiting times for high priority flows into the aggregation queue resolves to poor channel utilization. A Delayed Channel Access algorithm was designed to intentionally postpone the channel access procedure so that the number of packets in a formed frame can be increased and so will the network's overall performance. However, in some cases, the DCA algorithm has a negative impact on the applications that utilize the TCP protocol, especially the when small TCP window sizes are engaged. So, the TCP process starts to refrain from sending data due to delayed acknowledgements and the overall throughput drops. In this thesis, we address the above issues by firstly demonstrating the potential performance benefits of frame aggregation over the next generation wireless networks. The efficiency and behaviour of frame aggregation within a single queue, are mathematically analysed with the aid of a M=G[a;b]=1=K model. Results show that a trade-off choice has to be taken into account over minimizing the waiting time or maximizing utilization. We also point out that there isn't an optimum batch collection rule which can be assumed as generally valid but individual cases have to be considered separately. Secondly, we demonstrate through extensive simulations that by introducing a method, the DCA algorithm, which dynamically determines and adapts batch collections based upon the traffic's characteristics, QoS requirements and server's maximum capacity, also improves e ciency. Thirdly, it is important to understand the behaviour of the TCP ows over the WLAN and the influence that DCA has over the degrading performance of the TCP protocol. We investigate the cause of the problem and provide the foundations of designing and implementing possible solutions. Fourthly, we introduce two innovative proposals, one amendment and one extension to the original DCA algorithm, called Adaptive DCA and Selective DCA, respectively. Both solutions have been implemented in OPNET and extensive simulation runs over a wide set of scenarios show their effectiveness over the network's overall performance, each in its own way.This study was supported by the Engineering and Physical Sciences Research Council (EPSRC)

Intelligent and bandwidth-efficient medium access control protocols for IEEE 802.11p-based Vehicular Ad hoc Networks

Vehicle-to-Vehicle (V2V) technology aims to enable safer and more sophisticated transportation via the spontaneous formation of Vehicular Ad hoc Networks (VANETs). This type of wireless networks allows the exchange of kinematic and other data among vehicles, for the primary purpose of safer and more efficient driving, as well as efficient traffic management and other third-party services. Their infrastructure-less, unbounded nature allows the formation of dense networks that present a channel sharing issue, which is harder to tackle than in conventional WLANs. This thesis focuses on optimising channel access strategies, which is important for the efficient usage of the available wireless bandwidth and the successful deployment of VANETs. To start with, the default channel access control method for V2V is evaluated hardware via modifying the appropriate wireless interface Linux driver to enable finer on-the-fly control of IEEE 802.11p access control layer parameters. More complex channel sharing scenarios are evaluated via simulations and findings on the behaviour of the access control mechanism are presented. A complete channel sharing efficiency assessment is conducted, including throughput, fairness and latency measurements. A new IEEE 802.11p-compatible Q-Learning-based access control approach that improves upon the studied protocol is presented. The stations feature algorithms that “learn” how to act optimally in VANETs in order to maximise their achieved packet delivery and minimise bandwidth wastage. The feasibility of Q-Learning to be used as the base of selflearning protocols for IEEE 802.11p-based V2V communication access control in dense environments is investigated in terms of parameter tuning, necessary time of exploration, achieving latency requirements, scaling, multi-hop and accommodation of simultaneous applications. Additionally, the novel Collection Contention Estimation (CCE) mechanism for Q-Learning-based access control is presented. By embedding it on the Q-Learning agents, faster convergence, higher throughput, better service separation and short-term fairness are achieved in simulated network deployments. The acquired new insights on the network performance of the proposed algorithms can provide precise guidelines for efficient designs of practical, reliable, fair and ultra-low latency V2V communication systems for dense topologies. These results can potentially have an impact across a range of related areas, including various types of wireless networks and resource allocation for these, network protocol and transceiver design as well as QLearning applicability and considerations for correct use

Centralized Rate Allocation and Control in 802.11-based Wireless Mesh Networks

Wireless Mesh Networks (WMNs) built with commodity 802.11 radios are a cost-effective means of providing last mile broadband Internet access. Their multihop architecture allows for rapid deployment and organic growth of these networks. 802.11 radios are an important building block in WMNs. These low cost radios are readily available, and can be used globally in license-exempt frequency bands. However, the 802.11 Distributed Coordination Function (DCF) medium access mechanism does not scale well in large multihop networks. This produces suboptimal behavior in many transport protocols, including TCP, the dominant transport protocol in the Internet. In particular, cross-layer interaction between DCF and TCP results in flow level unfairness, including starvation, with backlogged traffic sources. Solutions found in the literature propose distributed source rate control algorithms to alleviate this problem. However, this requires MAC-layer or transport-layer changes on all mesh routers. This is often infeasible in practical deployments. In wireline networks, router-assisted rate control techniques have been proposed for use alongside end-to-end mechanisms. We evaluate the feasibility of establishing similar centralized control via gateway mesh routers in WMNs. We find that commonly used router-assisted flow control schemes designed for wired networks fail in WMNs. This is because they assume that: (1) links can be scheduled independently, and (2) router queue buildups are sufficient for detecting congestion. These abstractions do not hold in a wireless network, rendering wired scheduling algorithms such as Fair Queueing (and its variants) and Active Queue Management (AQM) techniques ineffective as a gateway-enforceable solution in a WMN. We show that only non-work-conserving rate-based scheduling can effectively enforce rate allocation via a single centralized traffic-aggregation point. In this context we propose, design, and evaluate a framework of centralized, measurement-based, feedback-driven mechanisms that can enforce a rate allocation policy objective for adaptive traffic streams in a WMN. In this dissertation we focus on fair rate allocation requirements. Our approach does not require any changes to individual mesh routers. Further, it uses existing data traffic as capacity probes, thus incurring a zero control traffic overhead. We propose two mechanisms based on this approach: aggregate rate control (ARC) and per-flow rate control (PFRC). ARC limits the aggregate capacity of a network to the sum of fair rates for a given set of flows. We show that the resulting rate allocation achieved by DCF is approximately max-min fair. PFRC allows us to exercise finer-grained control over the rate allocation process. We show how it can be used to achieve weighted flow rate fairness. We evaluate the performance of these mechanisms using simulations as well as implementation on a multihop wireless testbed. Our comparative analysis show that our mechanisms improve fairness indices by a factor of 2 to 3 when compared with networks without any rate limiting, and are approximately equivalent to results achieved with distributed source rate limiting mechanisms that require software modifications on all mesh routers

Reducing Latency in Internet Access Links with Mechanisms in Endpoints and within the Network

Excessive and unpredictable end-to-end latency is a major problem for today’s Internet performance, affecting a range of applications from real-time multimedia to web traffic. This is mainly attributed to the interaction between the TCP congestion control mechanism and the unmanaged large buffers deployed across the Internet. This dissertation investigates transport and link layer solutions to solve the Internet’s latency problem on the access links. These solutions operate on the sender side, within the network or use signaling between the sender and the network based on Explicit Congestion Notification (ECN). By changing the sender’s reaction to ECN, a method proposed in this dissertation reduces latency without harming link utilization. Real-life experiments and simulations show that this goal is achieved while maintaining backward compatibility and being gradually deployable on the Internet. This mechanism’s fairness to legacy traffic is further improved by a novel use of ECN within the network

Resource Management schemes for mobile ad hoc networks

Ph.DDOCTOR OF PHILOSOPH

LINK ADAPTATION IN WIRELESS NETWORKS: A CROSS-LAYER APPROACH

Conventional Link Adaptation Techniques in wireless networks aim to overcome harsh link conditions caused by physical environmental properties, by adaptively regulating modulation, coding and other signal and protocol specific parameters. These techniques are essential for the overall performance of the networks, especially for environments where the ambient noise level is high or the noise level changes rapidly. Link adaptation techniques answer the questions of What to change? and When to change? in order to improve the present layer performance. Once these decisions are made, other layers are expected to function perfectly with the new communication channel conditions. In our work, we have shown that this assumption does not always hold; and provide two mechanisms that lessen the negative outcomes caused by these decisions. Our first solution, MORAL, is a MAC layer link adaptation technique which utilizes the physical transmission information in order to create differentiation between wireless users with different communication capabilities. MORAL passively collects information from its neighbors and re-aligns the MAC layer parameters according to the observed conditions. MORAL improves the fairness and total throughput of the system through distributing the mutually shared network assets to the wireless users in a fairer manner, according to their capabilities. Our second solution, Data Rate and Fragmentation Aware Ad-hoc Routing protocol, is a network layer link adaptation technique which utilizes the physical transmission information in order to differentiate the wireless links according to their communication capabilities. The proposed mechanism takes the physical transmission parameters into account during the path creation process and produces energy-efficient network paths. The research demonstrated in this dissertation contributes to our understanding of link adaptation techniques and broadens the scope of such techniques beyond simple, one-step physical parameter adjustments. We have designed and implemented two cross-layer mechanisms that utilize the physical layer information to better adapt to the varying channel conditions caused by physical link adaptation mechanisms. These mechanisms has shown that even though the Link Adaptation concept starts at the physical layer, its effects are by no means restricted to this layer; and the wireless networks can benefit considerably by expanding the scope of this concept throughout the entire network stack