55,067 research outputs found

    Product assurance policies and procedures for flight dynamics software development

    Get PDF
    The product assurance policies and procedures necessary to support flight dynamics software development projects for Goddard Space Flight Center are presented. The quality assurance and configuration management methods and tools for each phase of the software development life cycles are described, from requirements analysis through acceptance testing; maintenance and operation are not addressed

    Assessment of the NASA Flight Assurance Review Program

    Get PDF
    The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined

    Mapping the Design Criterion Framework for Museum Exhibition Design Project

    Get PDF
    Currently, museums are struggling to develop and present their expertise by focusing on the interactive relationship with museum visitors. In order to meet the needs of museum exhibitions, an efficient and workable design process is of primary importance in order to work to develop high quality museum exhibitions. It would be advantageous to generate a design method which allows designers and curators to undertake design work in the context of museum exhibition project. Based on an empirical analysis, this paper suggests that a systematic transformation develops specific aspects of detailed design to carry out its principle, and that the implementation of these aspects can be viewed as a process of organizational criteria of museum exhibition design projects. The paper is concerned with design process in organizations seeking to act systematic criteria in the design activity on the application of museum exhibition project development in complex theories. In particular, this study is developed to address the following objectives: a) To identify the characteristics and concepts of the design activity as they relate to museum exhibition design; b) To contribute to a more complete understanding of design process by developing guidelines for adoption in projects. c) To establish the benefits of the application of design guide theory to the practice of museum exhibition design; Keywords: Museum Exhibition; Design Criteria; Design Process</p

    State of Alaska Election Security Project Phase 2 Report

    Get PDF
    A laska’s election system is among the most secure in the country, and it has a number of safeguards other states are now adopting. But the technology Alaska uses to record and count votes could be improved— and the state’s huge size, limited road system, and scattered communities also create special challenges for insuring the integrity of the vote. In this second phase of an ongoing study of Alaska’s election security, we recommend ways of strengthening the system—not only the technology but also the election procedures. The lieutenant governor and the Division of Elections asked the University of Alaska Anchorage to do this evaluation, which began in September 2007.Lieutenant Governor Sean Parnell. State of Alaska Division of Elections.List of Appendices / Glossary / Study Team / Acknowledgments / Introduction / Summary of Recommendations / Part 1 Defense in Depth / Part 2 Fortification of Systems / Part 3 Confidence in Outcomes / Conclusions / Proposed Statement of Work for Phase 3: Implementation / Reference

    Low velocity impact response of rc beam with artificial polyethylene aggregate as concrete block infill

    Get PDF
    In structural design, an ideal situation for saving materials would be to reduce the weight of the structure without having to compromise on its strength and serviceability. A new lightweight composite reinforced concrete section was developed with a novel use of a lightweight concrete block as infill utilizing Artificial Polyethylene Aggregate (APEA and MAPEA). The concrete near the neutral axis acts as a stress transfer medium between the compression and tension zones. Partial replacement of the concrete near the neutral axis could create a reduction in weight and savings in the use of materials. In this experimental work, APEA and MAPEA were utilized as replacement for normal aggregates (NA) at percentages of 0%, 3%, 6%, and 9%, 12%, and 100% in the concrete mix. In this study, the concrete block infill uses the 100% MAPEA as a replacement for coarse aggregate. A total of sixteen beams were prepared measuring 170 mm × 250 mm × 1000 mm, in which four specimens were used as control samples (NRC) and twelve specimens were the reinforced concrete beam incorporated with different size of concrete block infill (RCAI) consisting of 100% MAPEA. All beams were tested with 100 kg steel weight dropped vertically from a height of 0.6 m and 1.54 m, which was equivalent to 3.5 m/s and 5.5 m/s respectively. Based on the experimental results, the impact force, displacement and crack patterns were affected by the impact load. For RCAI specimens, the impact force was larger but smaller displacement value was observed, compared to the NRC specimens. Furthermore, the width of the cracks generated in the RCAI specimens near the mid-span was less than that on the NRC specimen. All experiment results were validated against FEM. The transient impact force histories, displacement and crack patterns obtained from FEM matched reasonably well with the experiment results. The error reported a range of 1% to 15%. The results showed that the proposed use of concrete block infill produced desirable results under the impact loads. The main advantages of the concrete block infill that utilized MAPEA from waste plastic bags due to the weight reduction about 6% in the concrete beams

    Managers Handbook for Software Development

    Get PDF
    Methods and aids for the management of software development projects are presented. The recommendations are based on analyses and experiences with flight dynamics software development. The management aspects of organizing the project, producing a development plan, estimation costs, scheduling, staffing, preparing deliverable documents, using management tools, monitoring the project, conducting reviews, auditing, testing, and certifying are described

    Improvement of speed response in four-phase DC–DC converter switching using two shunt voltage-source

    Get PDF
    This study proposes a technique that is able to improve the speed response of a four-phase DC–DC converter switching. The basic concept of the proposed technique is the inclusion of two shunt-connected voltage sources in series to the converter system. Using a higher input voltage to drive the load, a higher current per microsecond output system will be obtained and reverts to its nominal input upon obtaining desired references. Thus, the transient response observed when using this proposed technique is found to be much faster when compared to the conventional converter. Moreover, this technique is easily implemented as it requires only an additional voltage source, power switch, and power diode. The integrated model of the two shunt voltage-source in a four-phase DC–DC converter was simulated in MATLAB/Simulink and validated against the experimental results of a laboratory prototype, 600 W four-phase DC–DC converter. The novelty of this proposed technique is its ability to provide faster operations for critical loads applications, lower output capacitor and lower operating frequency

    Strengthening Construction Management in the Rural Rehab Line of Business

    Get PDF
    The Five Key ObservationsObservation#1: Rural rehab success emanated from positive thinking and persistent implementationObservation #2: Almost every RHRO would benefit from a substantial increase in the per unit funding available, especially in light of the forthcoming HUD HOME requirement to establish written rehab standards in ten subcategories.Observation #3: A smartphone and tablet with 20 to 40 apps is the rehab specialist's Swiss Army knife. They are our, GPS, calculator, spec writer, office lifeline in case of danger, camera, clock, cost estimator calendar and a hundred other single-purpose but very important uses.Observation #4: NeighborWorks® Rural Initiative could provide a clearinghouse for success techniques targeted to rural rehab. Each month it might focus on a specific aspect of rehab management; inspection checklists in January, green specs in February, feasibility checklist in March, contractor qualification questionnaires in April and so on.Observation #5: Even with most components of in-house contractor success formula in place, per the Statistic Research Institute 53% of construction firms go out of business with in the first 4 years. It remains a very risky model that requires significant; funding, staff experience, administrative support and risk tolerance.Three Rehab Production Models And Their AlternativesThis middle section restates the introduction and methodology and offers a detailed review of the Traditional Rehab Specialist, Construction Management Of Subcontractor and the In-House General Contractor production models .for each model the article provides: definition and staffing pattern, design roles and tasks for each major player, benefits and challenges, alternative models and finally recommendations for successful implementationFocus TopicsDuring our interview process, three ideas surfaced that were best served with a mini discussion of the topic rather than being embedded in the already large middle section.The three topics are; software and technology, management of community relations – marketing and quality control, and budget solution

    Management issues in systems engineering

    Get PDF
    When applied to a system, the doctrine of successive refinement is a divide-and-conquer strategy. Complex systems are sucessively divided into pieces that are less complex, until they are simple enough to be conquered. This decomposition results in several structures for describing the product system and the producing system. These structures play important roles in systems engineering and project management. Many of the remaining sections in this chapter are devoted to describing some of these key structures. Structures that describe the product system include, but are not limited to, the requirements tree, system architecture and certain symbolic information such as system drawings, schematics, and data bases. The structures that describe the producing system include the project's work breakdown, schedules, cost accounts and organization
    • …
    corecore