538 research outputs found
EVM as generic QoS trigger for heterogeneous wieless overlay network
Fourth Generation (4G) Wireless System will integrate heterogeneous wireless
overlay systems i.e. interworking of WLAN/ GSM/ CDMA/ WiMAX/ LTE/ etc with
guaranteed Quality of Service (QoS) and Experience (QoE).QoS(E) vary from
network to network and is application sensitive. User needs an optimal mobility
solution while roaming in Overlaid wireless environment i.e. user could
seamlessly transfer his session/ call to a best available network bearing
guaranteed Quality of Experience. And If this Seamless transfer of session is
executed between two networks having different access standards then it is
called Vertical Handover (VHO). Contemporary VHO decision algorithms are based
on generic QoS metrics viz. SNR, bandwidth, jitter, BER and delay. In this
paper, Error Vector Magnitude (EVM) is proposed to be a generic QoS trigger for
VHO execution. EVM is defined as the deviation of inphase/ quadrature (I/Q)
values from ideal signal states and thus provides a measure of signal quality.
In 4G Interoperable environment, OFDM is the leading Modulation scheme (more
prone to multi-path fading). EVM (modulation error) properly characterises the
wireless link/ channel for accurate VHO decision. EVM depends on the inherent
transmission impairments viz. frequency offset, phase noise,
non-linear-impairment, skewness etc. for a given wireless link. Paper provides
an insight to the analytical aspect of EVM & measures EVM (%) for key
management subframes like association/re-association/disassociation/ probe
request/response frames. EVM relation is explored for different possible
NAV-Network Allocation Vectors (frame duration). Finally EVM is compared with
SNR, BER and investigation concludes EVM as a promising QoS trigger for OFDM
based emerging wireless standards.Comment: 12 pages, 7 figures, IJWMN 2010 august issue vol. 2, no.
A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends
This paper examines the security vulnerabilities and threats imposed by the
inherent open nature of wireless communications and to devise efficient defense
mechanisms for improving the wireless network security. We first summarize the
security requirements of wireless networks, including their authenticity,
confidentiality, integrity and availability issues. Next, a comprehensive
overview of security attacks encountered in wireless networks is presented in
view of the network protocol architecture, where the potential security threats
are discussed at each protocol layer. We also provide a survey of the existing
security protocols and algorithms that are adopted in the existing wireless
network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term
evolution (LTE) systems. Then, we discuss the state-of-the-art in
physical-layer security, which is an emerging technique of securing the open
communications environment against eavesdropping attacks at the physical layer.
We also introduce the family of various jamming attacks and their
counter-measures, including the constant jammer, intermittent jammer, reactive
jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the
integration of physical-layer security into existing authentication and
cryptography mechanisms for further securing wireless networks. Finally, some
technical challenges which remain unresolved at the time of writing are
summarized and the future trends in wireless security are discussed.Comment: 36 pages. Accepted to Appear in Proceedings of the IEEE, 201
Handover management in mobile WiMAX using adaptive cross-layer technique
The protocol type and the base station (BS) technology are the main communication media between the Vehicle to Infrastructure (V2I) communication in vehicular networks. During high speed vehicle movement, the best communication would be with a seamless handover (HO) delay in terms of lower packet loss and throughput. Many studies have focused on how to reduce the HO delay during lower speeds of the vehicle with data link (L2) and network (L3) layers protocol. However, this research studied the Transport Layer (L4) protocol mobile Stream Control Transmission Protocol (mSCTP) used as an optimal protocol in collaboration with the Location Manager (LM) and Domain Name Server (DNS). In addition, the BS technology that performs smooth HO employing an adaptive algorithm in L2 to perform the HO according to current vehicle speed was also included in the research. The methods derived from the combination of L4 and the BS technology methods produced an Adaptive Cross-Layer (ACL) design which is a mobility oriented handover management scheme that adapts the HO procedure among the protocol layers. The optimization has a better performance during HO as it is reduces scanning delay and diversity level as well as support transparent mobility among layers in terms of low packet loss and higher throughput. All of these metrics are capable of offering maximum flexibility and efficiency while allowing applications to refine the behaviour of the HO procedure. Besides that, evaluations were performed in various scenarios including different vehicle speeds and background traffic. The performance evaluation of the proposed ACL had approximately 30% improvement making it better than the other handover solutions
セルラーネットワークにおける無線LANオフロードのためのネットワーク選択方式に関する研究
早大学位記番号:新7456早稲田大
IP-Based Mobility Management and Handover Latency Measurement in heterogeneous environments
One serious concern in the ubiquitous networks is the seamless vertical handover management between different wireless technologies. To meet this challenge, many standardization organizations proposed different protocols at different layers of the protocol stack. The Internet Engineering Task Force (IETF) has different groups working on mobility at IP level in order to enhance mobile IPv4 and mobile IPv6 with different variants: HMIPv6 (Hierarchical Mobile IPv6), FMIPv6 (Fast Mobile IPv6) and PMIPv6 (Proxy Mobile IPv6) for seamless handover. Moreover, the IEEE 802.21 standard provides another framework for seamless handover. The 3GPP standard provides the Access Network and Selection Function (ANDSF) to support seamless handover between 3GPP – non 3GPP networks like Wi-Fi, considered as untrusted, and WIMAX considered as trusted networks. In this paper, we present an in-depth analysis of seamless vertical handover protocols and a handover latency comparison of the main mobility management approaches in the literature. The comparison shows the advantages and drawbacks of every mechanism in order to facilitate the adoption of the convenient one for vertical handover within Next Generation Network (NGN) environments. Keywords: Seamless vertical handover, mobility management protocols, IEEE 802.21 MIH, handover latenc
SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS
A finales de los años noventa, y al comienzo del nuevo milenio, las redes inalámbricas han evolucionado bastante, pasando de ser sólo una tecnología prometedora para convertirse en un requisito para las actividades cotidianas en las sociedades desarrolladas. La infraestructura de transporte también ha evolucionado, ofreciendo comunicación a bordo para mejorar la seguridad vial y el acceso a contenidos de información y entretenimiento.
Los requisitos de los usuarios finales se han hecho dependientes de la tecnología, lo que significa que sus necesidades de conectividad han aumentado debido a los diversos requisitos de las aplicaciones que se ejecutan en sus dispositivos móviles, tales como tabletas, teléfonos inteligentes, ordenadores portátiles o incluso ordenadores de abordo (On-Board Units (OBUs)) dentro de los vehículos. Para cumplir con dichos requisitos de conectividad, y teniendo en cuenta las diferentes redes inalámbricas disponibles, es necesario adoptar técnicas de Vertical Handover (VHO) para cambiar de red de forma transparente y sin necesidad de intervención del usuario.
El objetivo de esta tesis es desarrollar algoritmos de decisión (Vertical Handover Decision Algorithms (VHDAs)) eficientes y escalables, optimizados para el contexto de las redes vehiculares. En ese sentido se ha propuesto, desarrollado y probado diferentes algoritmos de decisión basados en la infraestructura disponible en las actuales, y probablemente en las futuras, redes inalámbricas y redes vehiculares. Para ello se han combinado diferentes técnicas, métodos computacionales y modelos matemáticos, con el fin de garantizar una conectividad apropiada, y realizando el handover hacia las redes más adecuadas de manera a cumplir tanto con los requisitos de los usuarios como los requisitos de las aplicaciones.
Con el fin de evaluar el contexto, se han utilizado diferentes herramientas para obtener información variada, como la disponibilidad de la red, el estado de la red, la geolocalizaciónMárquez Barja, JM. (2012). SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17869Palanci
- …