A Tutorial on Nonorthogonal Multiple Access for 5G and Beyond

Today's wireless networks allocate radio resources to users based on the orthogonal multiple access (OMA) principle. However, as the number of users increases, OMA based approaches may not meet the stringent emerging requirements including very high spectral efficiency, very low latency, and massive device connectivity. Nonorthogonal multiple access (NOMA) principle emerges as a solution to improve the spectral efficiency while allowing some degree of multiple access interference at receivers. In this tutorial style paper, we target providing a unified model for NOMA, including uplink and downlink transmissions, along with the extensions tomultiple inputmultiple output and cooperative communication scenarios. Through numerical examples, we compare the performances of OMA and NOMA networks. Implementation aspects and open issues are also detailed.Comment: 25 pages, 10 figure

Improving the Bandwidth Efficiency of Multiple Access Channels using Network Coding and Successive Decoding

In this thesis, different approaches for improving the bandwidth efficiency of Multiple Access Channels (MAC) have been proposed. Such improvements can be achieved with methods that use network coding, or with methods that implement successive decoding. Both of these two methods have been discussed here. Under the first method, two novel schemes for using network coding in cooperative networks have been proposed. In the first scheme, network coding generates some redundancy in addition to the redundancy that is generated by the channel code. These redundancies are used in an iterative decoding system at the destination. In the second scheme, the output of the channel encoder in each source node is shortened and transmitted. The relay, by use of the network code, sends a compressed version of the parts missing from the original transmission. This facilitates the decoding procedure at the destination. Simulation based optimizations have been developed. The results indicate that in the case of sources with non-identical power levels, both scenarios outperform the non-relay case. The second method, involves a scheme to increase the channel capacity of an existing channel. This increase is made possible by the introduction of a new Raptor coded interfering channel to an existing channel. Through successive decoding at the destination, the data of both main and interfering sources is decoded. We will demonstrate that when some power difference exists, there is a tradeoff between achieved rate and power efficiency. We will also find the optimum power allocation scenario for this tradeoff. Ultimately we propose a power adaptation scheme that allocates the optimal power to the interfering channel based on an estimation of the main channel's condition. Finally, we generalize our work to allow the possibility of decoding either the secondary source data or the main source data first. We will investigate the performance and delay for each decoding scheme. Since the channels are non-orthogonal, it is possible that for some power allocation scenarios, constellation points get erased. To address this problem we use constellation rotation. The constellation map of the secondary source is rotated to increase the average distance between the points in the constellation (resulting from the superposition of the main and interfering sources constellation.) We will also determine the optimum constellation rotation angle for the interfering source analytically and confirm it with simulations

Five decades of hierarchical modulation and its benefits in relay-aided networking

Hierarchical modulation (HM), which is also known as layered modulation, has been widely adopted across the telecommunication industry. Its strict backward compatibility with single-layer modems and its low complexity facilitate the seamless upgrading of wireless communication services. The specific features of HM may be conveniently exploited for improving the throughput/information-rate of the system without requiring any extra bandwidth, while its complexity may even be lower than that of the equivalent system relying on conventional modulation schemes. As a recent research trend, the potential employment of HM in the context of cooperative communications has also attracted substantial research interests. Motivated by the lower complexity and higher flexibility of HM, we provide a comprehensive survey and conclude with a range of promising future research directions. Our contribution is the conception of a new cooperative communication paradigm relying on turbo trellis-coded modulation-aided twin-layer HM-16QAM and the analytical performance investigation of a four-node cooperative communication network employing a novel opportunistic routing algorithm. The specific performance characteristics evaluated include the distribution of delay, the outage probability, the transmit power of each node, the average packet power consumption, and the system throughput. The simulation results have demonstrated that when transmitting the packets formed by layered modulated symbol streams, our opportunistic routing algorithm is capable of reducing the transmit power required for each node in the network compared with that of the system using the traditional opportunistic routing algorithm. We have also illustrated that the minimum packet power consumption of our system using our opportunistic routing algorithm is also lower than that of the system using the traditional opportunistic routing algorithm

Content delivery over multi-antenna wireless networks

The past few decades have witnessed unprecedented advances in information technology, which have significantly shaped the way we acquire and process information in our daily lives. Wireless communications has become the main means of access to data through mobile devices, resulting in a continuous exponential growth in wireless data traffic, mainly driven by the demand for high quality content. Various technologies have been proposed by researchers to tackle this growth in 5G and beyond, including the use of increasing number of antenna elements, integrated point-to-multipoint delivery and caching, which constitute the core of this thesis. In particular, we study non-orthogonal content delivery in multiuser multiple-input-single-output (MISO) systems. First, a joint beamforming strategy for simultaneous delivery of broadcast and unicast services is investigated, based on layered division multiplexing (LDM) as a means of superposition coding. The system performance in terms of minimum required power under prescribed quality-of-service (QoS) requirements is examined in comparison with time division multiplexing (TDM). It is demonstrated through simulations that the non-orthogonal delivery strategy based on LDM significantly outperforms the orthogonal strategy based on TDM in terms of system throughput and reliability. To facilitate efficient implementation of the LDM-based beamforming design, we further propose a dual decomposition-based distributed approach. Next, we study an efficient multicast beamforming design in cache-aided multiuser MISO systems, exploiting proactive content placement and coded delivery. It is observed that the complexity of this problem grows exponentially with the number of subfiles delivered to each user in each time slot, which itself grows exponentially with the number of users in the system. Therefore, we propose a low-complexity alternative through time-sharing that limits the number of subfiles that can be received by a user in each time slot. Moreover, a joint design of content delivery and multicast beamforming is proposed to further enhance the system performance, under the constraint on maximum number of subfiles each user can decode in each time slot. Finally, conclusions are drawn in Chapter 5, followed by an outlook for future works.Open Acces

Application of network coding in satellite broadcast and multiple access channels

Satellite broadcasting and relaying capabilities enable mobile broadcast systems over wide geographical areas, which opens large market possibilities for handheld, vehicular and fixed user terminals. The geostationary (GEO) satellite orbit is highly suited for such applications, as it spares the need for satellite terminals to track the movement of the spacecraft, with important savings in terms of complexity and cost. The large radius of the GEO orbit (more than 40000 km) has two main drawbacks. One is the large free space loss experienced by a signal traveling to or from the satellite, which limits the signal-to-noise ratio (SNR) margins in the link budget with respect to terrestrial systems. The second drawback of the GEO orbit is the large propagation delay (about 250 msec) that limits the use of feedback in both the forward (satellite to satellite terminal) and the reverse (satellite terminal to satellite) link. The limited margin protection causes loss of service availability in environments where there is no direct line of sight to the satellite, such as urban areas. The large propagation delay on its turn, together with the large terminal population size usually served by a GEO satellite, limit the use of feedback, which is at the basis of error-control. In the reverse link, especially in the case of fixed terminals, packet losses are mainly due to collisions, that severely limit the access to satellite services in case a random access scheme is adopted. The need for improvements and further understanding of these setups lead to the development of our work. In this dissertation we study the application of network coding to counteract the above mentioned channel impairments in satellite systems. The idea of using network coding stems from the fact that it allows to efficiently exploit the diversity, either temporal or spatial, present in the system. In the following we outline the original contributions included in each of the chapters of the dissertation. Chapter 3. This chapter deals with channel impairments in the forward link, and specifically with the problem of missing coverage in Urban environments for land mobile satellite (LMS) networks. By applying the Max-flow Min-cut theorem we derive a lower bound on the maximum coverage that can be achieved through cooperation. Inspired by this result, we propose a practical scheme, keeping in mind the compatibility with the DVB-SH standard. We developed a simulator in Matlab/C++ based on the physical layer abstraction and used it to test the performance gain of our scheme with a benchmark relaying scheme that does allow coding at packet level. Chapter 4. The second chapter of contributions is devoted to the information theoretical study of real-time streaming transmissions over fading channels with channel state information at the transmitter only. We introduce this new channel model and propose several transmission schemes, one of which is proved to be asymptotically optimal in terms of throughput. We also provide an upper bound on the achievable throughput for the proposed channel model and compare it numerically with the proposed schemes over a Rayleigh fading channel. Chapter 5. Chapter 5 is devoted to the study of throughput and delay in non-real-time streaming transmission over block fading channels. We derive bounds on the throughput and the delay for this channel and propose different coding techniques based on time-sharing. For each of them we carry out an analytical study of the performance. Finally, we compare numerically the performance of the proposed schemes over a Rayleigh fading channel. Chapter 6. In the last technical chapter we propose a collision resolution method for the return link based on physical layer network coding over extended Galois field (EGF). The proposed scheme extracts information from the colliding signals and achieves important gains with respect to Slotted ALOHA systems as well as with respect to other collision resolution schemes.Una de les característiques mes importants de les plataformes de comunicacions per satèl.lit és la seva capacitat de retransmetre senyals rebuts a un gran número de terminals. Això es fonamental en contextes com la difusió a terminals mòbils o la comunicació entre màquines. Al mateix temps, la disponibilitat d’un canal de retorn permet la creació de sistemes de comunicacions per satèl.lit interactius que, en principi, poden arribar a qualsevol punt del planeta. Els satèl.lits Geoestacionaris son particularment adequats per a complir amb aquesta tasca. Aquest tipus de satèl.lits manté una posició fixa respecte a la Terra, estalviant als terminals terrestres la necessitat de seguir el seu moviment en el cel. Per altra banda, la gran distància que separa la Terra dels satèl.lits Geoestacionaris introdueix grans retrassos en les comunicacions que, afegit al gran número de terminals en servei, limita l’ús de tècniques de retransmissió basades en acknowledgments en cas de pèrdua de paquets. Per tal de sol.lucionar el problema de la pèrdua de paquets, les tècniques més utilitzades son el desplegament de repetidors terrestres, anomenats gap fillers, l’ús de codis de protecció a nivell de paquet i mecanismes proactius de resolució de col.lisions en el canal de retorn. En aquesta tesi s’analitzen i s’estudien sol.lucions a problemes en la comunicació per satèl.lit tant en el canal de baixada com el de pujada. En concret, es consideren tres escenaris diferents. El primer escenari es la transmissió a grans poblacions de terminals mòbils en enorns urbans, que es veuen particularment afectats per la pèrdua de paquets degut a l’obstrucció, per part dels edificis, de la línia de visió amb el satèl.lit. La sol.lució que considerem consisteix en la utilització de la cooperació entre terminals. Una vegada obtinguda una mesura del guany que es pot assolir mitjançant cooperació en un model bàsic de xarxa, a través del teorema Max-flow Min-cut, proposem un esquema de cooperació compatible amb estàndards de comunicació existents. El segon escenari que considerem es la transmissió de vídeo, un tipus de tràfic particularment sensible a la pèrdua de paquets i retards endògens als sistemes de comunicació per satèl.lit. Considerem els casos de transmissió en temps real i en diferit, des de la perspectiva de teoria de la informació, i estudiem diferents tècniques de codificació analítica i numèrica. Un dels resultats principals obtinguts es l’extensió del límit assolible de la capacitat ergòdica del canal en cas que el transmissor rebi les dades de manera gradual, enlloc de rebre-les totes a l’inici de la transmissió. El tercer escenari que considerem es l’accés aleatori al satèl.lit. Desenvolupem un esquema de recuperació dels paquets perduts basat en la codificació de xarxa a nivell físic i en extensions a camps de Galois, amb resultats molt prometedors en termes de rendiment. També estudiem aspectes relacionats amb la implementació pràctica d’aquest esquema

Self-concatenated coding for wireless communication systems

In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput