Risk based multi-objective security control and congestion management

Deterministic security criterion has served power system operation, congestion management quite well in last decades. It is simple to be implemented in a security control model, for example, security constrained optimal power flow (SCOPF). However, since event likelihood and violation information are not addressed, it does not provide quantitative security understanding, and so results in system inadequate awareness. Therefore, even if computation capability and information techniques have been greatly improved and widely applied in the operation support tool, operators are still not able to get rid of the security threat, especially in the market competitive environment.;Probability approach has shown its strong ability for planning purpose, and recently gets attention in operation area. Since power system security assessment needs to analyze consequence of all credible events, risk defined as multiplication of event probability and severity is well suited to give an indication to quantify the system security level, and congestion level as well. Since risk addresses extra information, its application for making BETTER online operation decision becomes an attractive research topic.;This dissertation focus on system online risk calculation, risk based multi-objective optimization model development, risk based security control design, and risk based congestion management. A regression model is proposed to predict contingency probability using weather and geography information for online risk calculation. Risk based multi-objective optimization (RBMO) model is presented, considering conflict objectives: risks and cost. Two types of method, classical methods and evolutionary algorithms, are implemented to solve RBMO problem, respectively. A risk based decision making architecture for security control is designed based on the Pareto-optimal solution understanding, visualization tool and high level information analysis. Risk based congestion management provides a market lever to uniformly expand a security VOLUME , where greater volume means more risk. Meanwhile, risk based LMP signal contracts ALL dimensions of this VOLUME in proper weights (state probabilities) at a time.;Two test systems, 6-bus and IEEE RTS 96, are used to test developed algorithms. The simulation results show that incorporating risk into security control and congestion management will evolve our understanding of security level, improve control and market efficiency, and support operator to maneuver system in an effective fashion

BIM-based Generative Modular Housing Design and Implications for Post-Disaster Housing Recovery

The adverse social and financial impacts of catastrophic disasters are increasing as population centers grow. After disastrous events, the government agencies must respond to post-disaster housing issues quickly and efficiently and provide sufficient resources for the reconstruction of destroyed and damaged houses for full rehabilitation. However, post-disaster housing reconstruction is a highly complex process because of the large number of projects, shortage of resources, and heavy pressure for delivery of the projects after a disastrous event. This complexity and lack of an inconsistent, systematic approach for planning lead to an ad-hoc decision-making process and inefficient recovery. This research explored modular construction as a highly time-efficient approach to tackle the abovementioned challenges and facilitate the housing reconstruction process. Firstly, this research investigated the feasibility of using the modular construction method for rapid post-disaster housing reconstruction through a targeted literature review and survey of subject matter experts to broaden the understanding of modular construction-based post-disaster housing reconstruction, benefits, and barriers. Second, this research focused on improving the design and pre-planning phase of modular construction that can facilitate the successful implementation of modular construction in a post-disaster situation. To this end, a BIM-based generative modular housing design system was developed by using Generative Adversarial Networks (GANs) to automate the entire design process by incorporating manufacturing and construction constraints to fit the needs of the modular construction method. The framework was further extended by developing an optimization model to optimize the modularization strategy in the early design phase which was capable of reflecting the entire multi-stage process of modular construction (production, transportation, and assembly), and considering both individual project’s requirements and post-disaster housing reconstruction portfolio’s requirements. The outcomes of this study fit the MC industry that may be used by designers and modular housing companies looking to automate their design process. It is also expected to provide critical benchmarks for planners, decision-makers, and community developers to facilitate their decision-making process on considering modular construction as an efficient way for mass post-disaster housing reconstruction and addressing communities’ housing needs following a disastrous event

Multi-objective optimisation methods applied to complex engineering systems

This research proposes, implements and analyses a novel framework for multiobjective optimisation through evolutionary computing aimed at, but not restricted to, real-world problems in the engineering design domain. Evolutionary algorithms have been used to tackle a variety of non-linear multiobjective optimisation problems successfully, but their success is governed by key parameters which have been shown to be sensitive to the nature of the particular problem, incorporating concerns such as the number of objectives and variables, and the size and topology of the search space, making it hard to determine the best settings in advance. This work describes a real-encoded multi-objective optimising evolutionary algorithm framework, incorporating a genetic algorithm, that uses self-adaptive mutation and crossover in an attempt to avoid such problems, and which has been benchmarked against both standard optimisation test problems in the literature and a real-world airfoil optimisation case. For this last case, the minimisation of drag and maximisation of lift coefficients of a well documented standard airfoil, the framework is integrated with a freeform deformation tool to manage the changes to the section geometry, and XFoil, a tool which evaluates the airfoil in terms of its aerodynamic efficiency. The performance of the framework on this problem is compared with those of two other heuristic MOO algorithms known to perform well, the Multi-Objective Tabu Search (MOTS) and NSGA-II, showing that this framework achieves better or at least no worse convergence. The framework of this research is then considered as a candidate for smart (electricity) grid optimisation. Power networks can be improved in both technical and economical terms by the inclusion of distributed generation which may include renewable energy sources. The essential problem in national power networks is that of power flow and in particular, optimal power flow calculations of alternating (or possibly, direct) current. The aims of this work are to propose and investigate a method to assist in the determination of the composition of optimal or high-performing power networks in terms of the type, number and location of the distributed generators, and to analyse the multi-dimensional results of the evolutionary computation component in order to reveal relationships between the network design vector elements and to identify possible further methods of improving models in future work. The results indicate that the method used is a feasible one for the achievement of these goals, and also for determining optimal flow capacities of transmission lines connecting the bus bars in the network

Advances in Evolutionary Algorithms

With the recent trends towards massive data sets and significant computational power, combined with evolutionary algorithmic advances evolutionary computation is becoming much more relevant to practice. Aim of the book is to present recent improvements, innovative ideas and concepts in a part of a huge EA field

Distribution energy storage investment prioritization with a real coded multi-objective genetic algorithm

Energy Storage Systems (ESSs) are progressively becoming an essential requisite for the upcoming Smart Distribution Systems thanks to the flexibility they introduce in the network operation. A rapid improvement in ESS technology efficiency has been seen, but not yet sufficient to drastically reduce the high investments associated. Thus, optimal planning and management of these devices are crucial to identify specific configurations that can justify ESSs installation. This consideration has motivated a strong interest of the researchers in this field that, however, have separately solved the optimal ESS location and the optimal ESS schedule. In the paper, a novel multi-objective approach is presented, based on the Non-dominated Sorted Genetic Algorithm - II integrated with a real codification that allows joining in a single optimization all the main features of an optimal ESS implementation project: siting, sizing and scheduling. The methodology has been tested on a real-size rural distribution network

An efficient multi-objective evolutionary approach for solving the operation of multi-reservoir system scheduling in hydro-power plants

This paper tackles the short-term hydro-power unit commitment problem in a multi-reservoir system ? a cascade-based operation scenario. For this, we propose a new mathematical modeling in which the goal is to maximize the total energy production of the hydro-power plant in a sub-daily operation, and, simultaneously, to maximize the total water content (volume) of reservoirs. For solving the problem, we discuss the Multi-objective Evolutionary Swarm Hybridization (MESH) algorithm, a recently proposed multi-objective swarm intelligence-based optimization method which has obtained very competitive results when compared to existing evolutionary algorithms in specific applications. The MESH approach has been applied to find the optimal water discharge and the power produced at the maximum reservoir volume for all possible combinations of turbines in a hydro-power plant. The performance of MESH has been compared with that of well-known evolutionary approaches such as NSGA-II, NSGA-III, SPEA2, and MOEA/D in a realistic problem considering data from a hydro-power energy system with two cascaded hydro-power plants in Brazil. Results indicate that MESH showed a superior performance than alternative multi-objective approaches in terms of efficiency and accuracy, providing a profit of $412,500 per month in a projection analysis carried out.European CommissionMinisterio de Economía y CompetitividadComunidad de Madri

An efficient multi-objective evolutionary approach for solving the operation of multi-reservoir system scheduling in hydro-power plants

This paper tackles the short-term hydro-power unit commitment problem in a multi-reservoir system ? a cascade-based operation scenario. For this, we propose a new mathematical modeling in which the goal is to maximize the total energy production of the hydro-power plant in a sub-daily operation, and, simultaneously, to maximize the total water content (volume) of reservoirs. For solving the problem, we discuss the Multi-objective Evolutionary Swarm Hybridization (MESH) algorithm, a recently proposed multi-objective swarm intelligence-based optimization method which has obtained very competitive results when compared to existing evolutionary algorithms in specific applications. The MESH approach has been applied to find the optimal water discharge and the power produced at the maximum reservoir volume for all possible combinations of turbines in a hydro-power plant. The performance of MESH has been compared with that of well-known evolutionary approaches such as NSGA-II, NSGA-III, SPEA2, and MOEA/D in a realistic problem considering data from a hydro-power energy system with two cascaded hydro-power plants in Brazil. Results indicate that MESH showed a superior performance than alternative multi-objective approaches in terms of efficiency and accuracy, providing a profit of $412,500 per month in a projection analysis carried out.European CommissionAgencia Estatal de InvestigaciónComunidad de Madri