51,085 research outputs found
Beyond Counting: New Perspectives on the Active IPv4 Address Space
In this study, we report on techniques and analyses that enable us to capture
Internet-wide activity at individual IP address-level granularity by relying on
server logs of a large commercial content delivery network (CDN) that serves
close to 3 trillion HTTP requests on a daily basis. Across the whole of 2015,
these logs recorded client activity involving 1.2 billion unique IPv4
addresses, the highest ever measured, in agreement with recent estimates.
Monthly client IPv4 address counts showed constant growth for years prior, but
since 2014, the IPv4 count has stagnated while IPv6 counts have grown. Thus, it
seems we have entered an era marked by increased complexity, one in which the
sole enumeration of active IPv4 addresses is of little use to characterize
recent growth of the Internet as a whole.
With this observation in mind, we consider new points of view in the study of
global IPv4 address activity. Our analysis shows significant churn in active
IPv4 addresses: the set of active IPv4 addresses varies by as much as 25% over
the course of a year. Second, by looking across the active addresses in a
prefix, we are able to identify and attribute activity patterns to network
restructurings, user behaviors, and, in particular, various address assignment
practices. Third, by combining spatio-temporal measures of address utilization
with measures of traffic volume, and sampling-based estimates of relative host
counts, we present novel perspectives on worldwide IPv4 address activity,
including empirical observation of under-utilization in some areas, and
complete utilization, or exhaustion, in others.Comment: in Proceedings of ACM IMC 201
SDN as Active Measurement Infrastructure
Active measurements are integral to the operation and management of networks,
and invaluable to supporting empirical network research. Unfortunately, it is
often cost-prohibitive and logistically difficult to widely deploy measurement
nodes, especially in the core. In this work, we consider the feasibility of
tightly integrating measurement within the infrastructure by using Software
Defined Networks (SDNs). We introduce "SDN as Active Measurement
Infrastructure" (SAAMI) to enable measurements to originate from any location
where SDN is deployed, removing the need for dedicated measurement nodes and
increasing vantage point diversity. We implement ping and traceroute using
SAAMI, as well as a proof-of-concept custom measurement protocol to demonstrate
the power and ease of SAAMI's open framework. Via a large-scale measurement
campaign using SDN switches as vantage points, we show that SAAMI is accurate,
scalable, and extensible
Survey of End-to-End Mobile Network Measurement Testbeds, Tools, and Services
Mobile (cellular) networks enable innovation, but can also stifle it and lead
to user frustration when network performance falls below expectations. As
mobile networks become the predominant method of Internet access, developer,
research, network operator, and regulatory communities have taken an increased
interest in measuring end-to-end mobile network performance to, among other
goals, minimize negative impact on application responsiveness. In this survey
we examine current approaches to end-to-end mobile network performance
measurement, diagnosis, and application prototyping. We compare available tools
and their shortcomings with respect to the needs of researchers, developers,
regulators, and the public. We intend for this survey to provide a
comprehensive view of currently active efforts and some auspicious directions
for future work in mobile network measurement and mobile application
performance evaluation.Comment: Submitted to IEEE Communications Surveys and Tutorials. arXiv does
not format the URL references correctly. For a correctly formatted version of
this paper go to
http://www.cs.montana.edu/mwittie/publications/Goel14Survey.pd
Shortcuts through Colocation Facilities
Network overlays, running on top of the existing Internet substrate, are of
perennial value to Internet end-users in the context of, e.g., real-time
applications. Such overlays can employ traffic relays to yield path latencies
lower than the direct paths, a phenomenon known as Triangle Inequality
Violation (TIV). Past studies identify the opportunities of reducing latency
using TIVs. However, they do not investigate the gains of strategically
selecting relays in Colocation Facilities (Colos). In this work, we answer the
following questions: (i) how Colo-hosted relays compare with other relays as
well as with the direct Internet, in terms of latency (RTT) reductions; (ii)
what are the best locations for placing the relays to yield these reductions.
To this end, we conduct a large-scale one-month measurement of inter-domain
paths between RIPE Atlas (RA) nodes as endpoints, located at eyeball networks.
We employ as relays Planetlab nodes, other RA nodes, and machines in Colos. We
examine the RTTs of the overlay paths obtained via the selected relays, as well
as the direct paths. We find that Colo-based relays perform the best and can
achieve latency reductions against direct paths, ranging from a few to 100s of
milliseconds, in 76% of the total cases; 75% (58% of total cases) of these
reductions require only 10 relays in 6 large Colos.Comment: In Proceedings of the ACM Internet Measurement Conference (IMC '17),
London, GB, 201
Network emulation focusing on QoS-Oriented satellite communication
This chapter proposes network emulation basics and a complete case study of QoS-oriented Satellite Communication
Unified radio and network control across heterogeneous hardware platforms
Experimentation is an important step in the investigation of techniques for handling spectrum scarcity or the development of new waveforms in future wireless networks. However, it is impractical and not cost effective to construct custom platforms for each future network scenario to be investigated. This problem is addressed by defining Unified Programming Interfaces that allow common access to several platforms for experimentation-based prototyping, research, and development purposes. The design of these interfaces is driven by a diverse set of scenarios that capture the functionality relevant to future network implementations while trying to keep them as generic as possible. Herein, the definition of this set of scenarios is presented as well as the architecture for supporting experimentation-based wireless research over multiple hardware platforms. The proposed architecture for experimentation incorporates both local and global unified interfaces to control any aspect of a wireless system while being completely agnostic to the actual technology incorporated. Control is feasible from the low-level features of individual radios to the entire network stack, including hierarchical control combinations. A testbed to enable the use of the above architecture is utilized that uses a backbone network in order to be able to extract measurements and observe the overall behaviour of the system under test without imposing further communication overhead to the actual experiment. Based on the aforementioned architecture, a system is proposed that is able to support the advancement of intelligent techniques for future networks through experimentation while decoupling promising algorithms and techniques from the capabilities of a specific hardware platform
An IoT-based solution for monitoring a fleet of educational buildings focusing on energy efficiency
Raising awareness among young people and changing their behaviour and habits concerning energy usage iskey to achieving sustained energy saving. Additionally, young people are very sensitive to environmental protection so raising awareness among children is much easier than with any other group of citizens. This work examinesways to create an innovative Information & Communication Technologies (ICT) ecosystem (including web-based, mobile, social and sensing elements) tailored specifically for school environments, taking into account both theusers (faculty, staff, students, parents) and school buildings, thus motivating and supporting young citizenś behavioural change to achieve greater energy efficiency. A mixture of open-source IoT hardware and proprietary platforms on the infrastructure level, are currently being utilized for monitoring a fleet of 18 educational buildings across 3 countries, comprising over 700 IoT monitoring points. Hereon presented is the system's high-level architecture, as well as several aspects of its implementation, related to the application domain of educational building monitoring and energy efficiency. The system is developed based on open-source technologies andservices in order to make it capable of providing open IT-infrastructure and support from different commercial hardware/sensor vendors as well as open-source solutions. The system presented can be used to develop and offer newapp-based solutions that can be used either for educational purposes or for managing the energy efficiency ofthebuilding. The system is replicable and adaptable to settings that may be different than the scenarios envisionedhere (e.g., targeting different climate zones), different IT infrastructures and can be easily extended to accommodate integration with other systems. The overall performance of the system is evaluated in real-world environment in terms of scalability, responsiveness and simplicity
- …