An ISM/UWB antenna with offset feeding and slotted ground plane for body-centric communications

published_or_final_versio

Analysis and Design of a Novel Multiband Antenna for Mobile Terminals

A multiband planar terminal antenna with a compact size of 40 mm × 24 mm is proposed in this paper. This antenna consists of a monopole patch with two slots on it and a meandering strip loaded on the top. Two parasitic stubs and a branch on the ground are used to adjust and widen the impedance bandwidth of the antenna. Simulations and measurements are carried out to study the antenna performances in terms of impedance matching, efficiency, gain, and radiation patterns. Both of simulation and measurement results are shown to illustrate the good performance of the proposed antenna. The antenna can operate at 450–474 MHz, 860–1040 MHz, 1705–2428 MHz, and 2500–2710 MHz. These operating bandwidths cover GSM900, DCS, PCS, UMTS, LTE2500, and LTE’s low frequency band (450–470 MHz). It is very suitable for multifunctional terminal applications in wireless communication systems

Mutual Coupling Considerations in the Development of Multi-feed Antenna Systems

In the design of any multi-port network with more than one antenna, mutual coupling between these different ports must be accounted for. In an effort to investigate and control these mutual coupling effects, we have selected three structures to be thoroughly analyzed. Furthermore, they have been fabricated and tested to develop relevant design guides for these selected structures to have minimal mutual coupling effects. These selected structures included a feed network for a multi-port antenna, a dual feedhorn for a large reflector antenna, as well as a set of Multi- Input Multi-Output (MIMO) laptop antennas. In the first study, we analyzed a 30- port radial splitter that can be used for an in-phase feeding of a 30-high power transmitter. Our objectives here have been geared towards estimating the mutual coupling between the 30 ports and exploring the port and alignment failure analysis, its graceful degradation results, and relevant efficiency performance for such high power multi-port network will be presented. In the second study, we investigated the mutual coupling of a multifeedhorn structure of a large reflector antenna in order to allow multi-beam radiation or reception. This high gain antenna utilizes integrated feeds with precise physical tight spacing and could suffer from strong inter-coupling. Mutual coupling effects here include input match deterioration, beam width broadening, and cross-polarization degradation due to the proximity coupling of these various feeds. Our study derived accurate feed location expressions as well as methods to improve the decoupling between the feeds that have been implemented. These results will be discussed. For the third study, we carried out extensive investigates into the mutual coupling effects amidst wireless laptop antennas for a MIMO system implementation. For a laptop use, it is required to determine the best location, optimum spacing, and orientations of these antennas in order to achieve the maximum benefits of the system’s diversity. First, we studied the coupling between two antennas as a function of their spacing, types, and orientations. Subsequently, we extended the study to a controlled multi-antenna system for a MIMO implementation. Design rules for such implementation have been derived and will be discussed in detail

Design synthesis and miniaturization of multiband and reconfigurable microstrip antenna for future wireless applications

Tese de Doutoramento. Engenharia Electrónica e de Computadores - Telecomunicações. Faculdade de Engenharia. Universidade do Porto. 201

Wideband E-shaped Patch Antennas for Advanced Wireless Terminals

Low-profile patch antennas have become ubiquitous in wireless terminals, especially as devices have become smaller and demand more functionality out of their RF subsystems. While their shape and size is attactive for many applications, their narrow bandwidth hinders their usage in many systems. With the rise of computer-aided design, many patch antenna design concepts have been presented with enhanced bandwidth capabilities. The E-shaped patch antenna, whose original shape presented in the early 2000’s resembles the letter E, offers compelling performance with reasonable manufacturing complexity. In it most basic form, this antenna was linearly polarized and either wideband or dual-band. Over the last two decades, many variations of the E-shaped patch have been presented in literature: circularly polarized, miniaturized, frequency reconfigurable, or even polarization reconfigurable. This paper summarizes these efforts in realizing novel functionalities with a relatively simple design geometry

Investigations on some compact wideband fractal antennas

Today’s small handheld and other portable devices challenge antenna designers for ultrathin, and high performances that have the ability to meet multi standards. In the context, fractal geometries have significant role for antenna applications with varying degree of success in improving antenna characteristics. In this thesis, we have investigated several wideband fractal monopole antennas. This work starts with design and implementation of Koch fractal, hybrid fractal, sectoral fractal, semi-circle fractal monopole antennas with discussion, covering their operations, electrical behavior and performances. The performances of these designs have been studied using standard simulation tools used in industry/academia and are experimentally verified. Frequency reconfigurable Koch snowflake fractal monopole antenna is also introduced. The present antenna can be used as an array element and has a wideband frequency of operation. A square Sierpinski monopole antenna has been designed, which is suitable for use in indoor UWB radio system and outdoor base station communication systems. Technique for obtaining a band stop function in the 5-6 GHz frequency band is numerically and experimentally presented. In addition to examining the performance of UWB system, the transfer function and waveform distortion are discussed. Finally, fractal antenna for array with MIMO environment is developed for mobile communication devices. Aim of this work is to achieve the acceptable performances in terms of isolation, envelope correlation coefficient, capacity loss, radiation patterns and efficiency. Furthermore, a wideband feed network prototype based on a modified Wilkinson power divider is designed. The designed feed network has been used in constructing 2-element and 4-element linear antenna arrays for high gain. This research work has addressed the effectiveness of fractal geometries in antenna and to bring-out the true advantages of their in antenna engineering

Recent Advances in Antenna Design for 5G Heterogeneous Networks

The aim of this book is to highlight up to date exploited technologies and approaches in terms of antenna designs and requirements. In this regard, this book targets a broad range of subjects, including the microstrip antenna and the dipole and printed monopole antenna. The varieties of antenna designs, along with several different approaches to improve their overall performance, have given this book a great value, in which makes this book is deemed as a good reference for practicing engineers and under/postgraduate students working in this field. The key technology trends in antenna design as part of the mobile communication evolution have mainly focused on multiband, wideband, and MIMO antennas, and all have been clearly presented, studied and implemented within this book. The forthcoming 5G systems consider a truly mobile multimedia platform that constitutes a converged networking arena that not only includes legacy heterogeneous mobile networks but advanced radio interfaces and the possibility to operate at mm wave frequencies to capitalize on the large swathes of available bandwidth. This provides the impetus for a new breed of antenna design that, in principle, should be multimode in nature, energy efficient, and, above all, able to operate at the mm wave band, placing new design drivers on the antenna design. Thus, this book proposes to investigate advanced 5G antennas for heterogeneous applications that can operate in the range of 5G spectrums and to meet the essential requirements of 5G systems such as low latency, large bandwidth, and high gains and efficiencies

Reconfigurable Antennas

In this new book, we present a collection of the advanced developments in reconfigurable antennas and metasurfaces. It begins with a review of reconfigurability technologies, and proceeds to the presentation of a series of reconfigurable antennas, UWB MIMO antennas and reconfigurable arrays. Then, reconfigurable metasurfaces are introduced and the latest advances are presented and discussed

Wearable antennas for personal wireless networks.

In this study, we mainly characterize the wearable antenna system for off-body communications with respect to two conventional wireless communication systems as, cellular mobile systems (pes, GSM and UMTS) and wireless local area networks (WLAN). Unlike antennas embedded in portable devices, the complicated bodycentric environment has emerged with special requirements for wearable antennas design, like compact dimensions, light weight and flexible structure, hidden or water proofmg, and most importantly, capable of providing certain radiation shielding into the human body. This thesis aims to fmd an optimum solution to meet the particular requirements ofwearable antenna design. The first part is primarily concerned with characterising the electromagnetic properties of some textile and leather materials. Both insulating and conducting materials are investigated for using as substrate and radiating elements of high perfonnance textile antennas. Then a few of new antenna designs are proposed in the second part. These antennas are made out of textile and leather materials. They are low profIle, planar in geometry, and most importantly, they are capable to provide multi-operations with considerable wide bandwidth. An electromagnetic band gap structure is studied as it can provide a high impedance ground plane for low profIle antennas. The EBG plane can provide a perfect shielding layer for the body, and reduce the radiation toward the body significantly. Furthermore, the EBG plane is able to reduce the detuning of the antenna when placing near the body without serious bandwidth reduction, increase antenna gain and reduce mutual coupling from other devices. The final part carries out a series ofexperiments which can represent the body-centric environment These include bending, washing, wearing, coupling and SAR investigations. Antenna and EBG performances under body worn environment are tested and discussed in this thesis