Jigsaw: Scalable software-defined caches

Shared last-level caches, widely used in chip-multi-processors (CMPs), face two fundamental limitations. First, the latency and energy of shared caches degrade as the system scales up. Second, when multiple workloads share the CMP, they suffer from interference in shared cache accesses. Unfortunately, prior research addressing one issue either ignores or worsens the other: NUCA techniques reduce access latency but are prone to hotspots and interference, and cache partitioning techniques only provide isolation but do not reduce access latency.United States. Defense Advanced Research Projects Agency (DARPA PERFECT contract HR0011-13-2-0005)Quanta Computer (Firm

Planificación consciente de la contención y gestión de recursos en arquitecturas multicore emergentes

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 14-12-2021Chip multicore processors (CMPs) currently constitute the architecture of choice for mosto general-pùrpose computing systems, and they will likely continue to be dominant in the near future. Advances in technology have enabled to pack an increasing number of cores and bigger caches on the same chip. Nevertheless, contention on shared resources on CMPs -present since the advent of these architectures- still poses a big challenge. Cores in a CMP typically share a last-level cache (LLC) and other memory-related resources with the remaining cores, such as a DRAM controller and an interconnection network. This causes that co-running applications may intensively compete with each other for these shared resources, leading to substantial and uneven performance degradation...Los procesadores multinúcleo o CMPs (Chip Multicore Processors) son actualmente la arquitectura más usada por la mayoría de sistemas de computación de propósito general, y muy probablemente se mantendrían en esa posición dominante en el futuro cercano. Los avances tecnológicos han permitido integrar progresivamente en el mismo chip más cores y aumentar los tamaños de los distintos niveles de cache. No obstante, la contención de recursos compartidos en CMPs {presente desde la aparición de estas arquitecturas{ todavía representa un reto importante que afrontar. Los cores en un CMP comparten en la mayor parte de los diseños una cache de último nivel o LLC (Last-Level Cache) y otros recursos, como el controlador de DRAM o una red de interconexión. La existencia de dichos recursos compartidos provoca en ocasiones que cuando se ejecutan dos o más aplicaciones simultáneamente en el sistema, se produzca una degradación sustancial y potencialmente desigual del rendimiento entre aplicaciones...Fac. de InformáticaTRUEunpu

性能と消費電力を考慮したキャッシュメモリアーキテクチャに関する研究

Tohoku University小林 広明課

Adaptive Resource Management Techniques for High Performance Multi-Core Architectures

Reducing the average memory access time is crucial for improving the performance of applications executing on multi-core architectures. With workload consolidation this becomes increasingly challenging due to shared resource contention. Previous works has proposed techniques for partitioning of shared resources (e.g. cache and bandwidth) and prefetch throttling with the goal of mitigating contention and reducing or hiding average memory access time.Cache partitioning in multi-core architectures is challenging due to the need to determine cache allocations with low computational overhead and the need to place the partitions in a locality-aware manner. The requirement for low computational overhead is important in order to have the capability to scale to large core counts. Previous work within multi-resource management has proposed coordinately managing a subset of the techniques: cache partitioning, bandwidth partitioning and prefetch throttling. However, coordinated management of all three techniques opens up new possible trade-offs and interactions which can be leveraged to gain better performance. This thesis contributes with two different resource management techniques: One resource manger for scalable cache partitioning and a multi-resource management technique for coordinated management of cache partitioning, bandwidth partitioning and prefetching. The scalable resource management technique for cache partitioning uses a distributed and asynchronous cache partitioning algorithm that works together with a flexible NUCA enforcement mechanism in order to give locality-aware placement of data and support fine-grained partitions. The algorithm adapts quickly to application phase changes. The distributed nature of the algorithm together with the low computational complexity, enables the solution to be implemented in hardware and scale to large core counts. The multi-resource management technique for coordinated management of cache partitioning bandwidth partitioning and prefetching is designed using the results from our in-depth characterisation from the entire SPEC CPU2006 suite. The solution consists of three local resource management techniques that together with a coordination mechanism provides allocations which takes the inter-resource interactions and trade-offs into account.Our evaluation shows that the distributed cache partitioning solution performs within 1% from the best known centralized solution, which cannot scale to large core counts. The solution improves performance by 9% and 16%, on average, on a 16 and 64-core multi-core architecture, respectively, compared to a shared last-level cache. The multi-resource management technique gives a performance increase of 11%, on average, over state-of-the-art and improves performance by 50% compared to the baseline 16-core multi-core without cache partitioning, bandwidth partitioning and prefetch throttling

Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

高エネルギ効率マイクロプロセッサのためのハードウェア・ソフトウェア協調型キャッシュメモリシステムに関する研究

Tohoku University小林広明課

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations

Jigsaw: Scalable Software-Defined Caches (Extended Version)

Shared last-level caches, widely used in chip-multiprocessors (CMPs), face two fundamental limitations. First, the latency and energy of shared caches degrade as the system scales up. Second, when multiple workloads share the CMP, they suffer from interference in shared cache accesses. Unfortunately, prior research addressing one issue either ignores or worsens the other: NUCA techniques reduce access latency but are prone to hotspots and interference, and cache partitioning techniques only provide isolation but do not reduce access latency. We present Jigsaw, a technique that jointly addresses the scalability and interference problems of shared caches. Hardware lets software define shares, collections of cache bank partitions that act as virtual caches, and map data to shares. Shares give software full control over both data placement and capacity allocation. Jigsaw implements efficient hardware support for share management, monitoring, and adaptation. We propose novel resource-management algorithms and use them to develop a system-level runtime that leverages Jigsaw to both maximize cache utilization and place data close to where it is used. We evaluate Jigsaw using extensive simulations of 16- and 64-core tiled CMPs. Jigsaw improves performance by up to 2.2x (18% avg) over a conventional shared cache, and significantly outperforms state-of-the-art NUCA and partitioning techniques.This work was supported in part by DARPA PERFECT contract HR0011-13-2-0005 and Quanta Computer

ANALYTICAL MODEL FOR CHIP MULTIPROCESSOR MEMORY HIERARCHY DESIGN AND MAMAGEMENT

Continued advances in circuit integration technology has ushered in the era of chip multiprocessor (CMP) architectures as further scaling of the performance of conventional wide-issue superscalar processor architectures remains hard and costly. CMP architectures take advantageof Moore¡¯s Law by integrating more cores in a given chip area rather than a single fastyet larger core. They achieve higher performance with multithreaded workloads. However,CMP architectures pose many new memory hierarchy design and management problems thatmust be addressed. For example, how many cores and how much cache capacity must weintegrate in a single chip to obtain the best throughput possible? Which is more effective,allocating more cache capacity or memory bandwidth to a program?This thesis research develops simple yet powerful analytical models to study two newmemory hierarchy design and resource management problems for CMPs. First, we considerthe chip area allocation problem to maximize the chip throughput. Our model focuses onthe trade-off between the number of cores, cache capacity, and cache management strategies.We find that different cache management schemes demand different area allocation to coresand cache to achieve their maximum performance. Second, we analyze the effect of cachecapacity partitioning on the bandwidth requirement of a given program. Furthermore, ourmodel considers how bandwidth allocation to different co-scheduled programs will affect theindividual programs¡¯ performance. Since the CMP design space is large and simulating only one design point of the designspace under various workloads would be extremely time-consuming, the conventionalsimulation-based research approach quickly becomes ineffective. We anticipate that ouranalytical models will provide practical tools to CMP designers and correctly guide theirdesign efforts at an early design stage. Furthermore, our models will allow them to betterunderstand potentially complex interactions among key design parameters