Array Manifold Calibration for Multichannel SAR Sounders

This dissertation demonstrates airborne synthetic aperture radar (SAR) sounder array manifold calibration to improve outcomes in two-dimensional and three-dimensional image formation of ice sheet and glacier subsurfaces. The methodology relies on the creation of snapshot databases that aid in both the identification of calibration pixels as well as the validation of proposed calibration strategies. A parametric estimator of nonlinear SAR sounder manifold parameters is derived given a superset of statistically independent and spatially diverse subsets, assuming knowledge of the manifold model. Both measurements-based and computational electromagnetic modeling (CEM) approaches are pursued in obtaining a parametric representation of the manifold that enables the application of this estimator. The former relies on a principal components based characterization of SAR sounder manifolds. By incorporating a subspace clustering technique to identify pixels with a single dominant source, the algorithm circumvents an assumption of single source observations that underlies the formulation of nonparametric methods and traditionally limits the applicability of these techniques to the SAR sounder problem. Three manifolds are estimated and tested against a nominal manifold model in angle estimation and tomography. Measured manifolds on average reduce angle estimation error by a factor of 4.8 and lower vertical elevation uncertainty of SAR sounder derived digital elevation models by a factor of 3.7. Application of the measured manifolds in angle estimation produces 3-D images with more focused scattering signatures and higher intensity pixels that improve automated surface extraction outcomes. Measured manifolds are studied against Method of Moments predictions of the array's response to plane wave excitation obtained with a detailed model of the sounder's array that includes the airborne platform and fairing housing. CEM manifolds reduce angle estimation uncertainty off nadir on average by a factor of 3 when applied to measurements, providing initial confirmation of the utility of the CEM model in predicting angle estimation performance of the sounder's airborne arrays. The research findings of this dissertation indicate that SAR sounder manifold calibration will significantly increase the scientific value of legacy ice sheet and glacier sounding data sets and lead to optimized designs of future remote sensing instrumentation for surveying the cryosphere

Inverse Problem Formulation and Deep Learning Methods for Ultrasound Beamforming and Image Reconstruction

Ultrasound imaging is among the most common medical imaging modalities, which has the advantages of being real-time, non-invasive, cost-effective, and portable. Medical ultrasound images, however, have low values of signal-to-noise ratio due to many factors, and there has been a long-standing line of research on improving the quality of ultrasound images. Ultrasound transducers are made from piezoelectric elements, which are responsible for the insonification of the medium with non-invasive acoustic waves and also the reception of backscattered signals. Design optimizations span all steps of the image formation pipeline, including system architecture, hardware development, and software algorithms. Each step entails parameter optimizations and trade-offs in order to achieve a balance in competing effects such as cost, performance, and efficiency. The current thesis is devoted to research on image reconstruction techniques in order to push forward the classical limitations. It is tried not to be restricted into a specific class of computational imaging or machine learning method. As such, classical approaches and recent methods based on deep learning are adapted according to the requirements and limitations of the image reconstruction problem. In other words, we aim to reconstruct a high-quality spatial map of the medium echogenicity from raw channel data received from piezoelectric elements. All other steps of the ultrasound image formation pipeline are considered fixed, and the goal is to extract the best possible image quality (in terms of resolution, contrast, speckle pattern, etc.) from echo traces acquired by transducer elements. Two novel approaches are proposed on super-resolution ultrasound imaging by training deep models that create mapping functions from observations recorded from a single transmission to high-quality images. These models are mainly developed to resolve the necessity of several transmissions, which can potentially be used in applications that require both high framerate and image quality. The remaining four contributions are on beamforming, which is an essential step in medical ultrasound image reconstruction. Different approaches, including independent component analysis, deep learning, and inverse problem formulations, are utilized to tackle the ill-posed inverse problem of receive beamforming. The primary goal of novel beamformers is to find a solution to the trade-off between image quality and framerate. The final chapter consists of concluding remarks on each of our contributions, where the strengths and weaknesses of our proposed techniques based on classical computational imaging and deep learning methods are outlined. There is still a large room for improvement in all of our proposed techniques, and the thesis is concluded by providing avenues for future research to attain those improvements

Initial exploration of 21-cm cosmology with imaging and power spectra from the Murchison Widefield Array

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Physics, 2012.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student-submitted PDF version of thesis.Includes bibliographical references (p. 189-194).The Murchison Widefield Array (MWA) is a new low-frequency radio array under construction in Western Australia with a primary goal of measuring the power spectrum of the 21-cm signal from neutral hydrogen during the Epoch of Reionization (EoR). In this thesis, we detail efforts to characterize the MWA system, and present scientific results from a 32-element prototype interferometer deployed at the MWA site. We develop simulations and perform anechoic chamber measurements to verify the performance of the MWA antenna tiles. We develop a calibration and imaging pipeline for the MWA which uses w-projection widefield imaging techniques and direction-dependent point spread functions. Using data from an MWA expedition in March 2010, we produce confusion-limited maps covering ~ 2700 square degrees in a region of sky with low galactic temperature. We develop a blind source detection and extraction algorithm, and use it to perform a blind survey in these maps, and detect 655 sources at high significance with an additional 871 candidates. We compare these sources with existing low-frequency radio surveys in order to assess the MWA-32T system performance, and to identify new candidates for ultra-steep spectrum radio sources. In order to constrain the EoR, we apply two power spectrum estimation techniques to this dataset: a Fast Fourier Transform in order to rapidly compute power spectra, and a quadratic estimation method which uses inverse covariance weighting to produce an optimal estimate. We use a principal component analysis to identify and remove the foreground contaminants. In the resulting two-dimensional power spectra, we find the predicted "wedge" feature due to the chromaticity of the instrumental response, and identify a sensitive region free of strong contaminants which can be used for characterizing the EoR signal. We then use these data to produce new limits on the EoR power spectrum at z = 9.by Christopher Leigh Williams.Ph.D

Recent Advances in Signal Processing

The signal processing task is a very critical issue in the majority of new technological inventions and challenges in a variety of applications in both science and engineering fields. Classical signal processing techniques have largely worked with mathematical models that are linear, local, stationary, and Gaussian. They have always favored closed-form tractability over real-world accuracy. These constraints were imposed by the lack of powerful computing tools. During the last few decades, signal processing theories, developments, and applications have matured rapidly and now include tools from many areas of mathematics, computer science, physics, and engineering. This book is targeted primarily toward both students and researchers who want to be exposed to a wide variety of signal processing techniques and algorithms. It includes 27 chapters that can be categorized into five different areas depending on the application at hand. These five categories are ordered to address image processing, speech processing, communication systems, time-series analysis, and educational packages respectively. The book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion