634 research outputs found
Micro protocol engineering for unstructured carriers: On the embedding of steganographic control protocols into audio transmissions
Network steganography conceals the transfer of sensitive information within
unobtrusive data in computer networks. So-called micro protocols are
communication protocols placed within the payload of a network steganographic
transfer. They enrich this transfer with features such as reliability, dynamic
overlay routing, or performance optimization --- just to mention a few. We
present different design approaches for the embedding of hidden channels with
micro protocols in digitized audio signals under consideration of different
requirements. On the basis of experimental results, our design approaches are
compared, and introduced into a protocol engineering approach for micro
protocols.Comment: 20 pages, 7 figures, 4 table
Recommended from our members
High capacity steganographic method based upon JPEG
The two most important aspects of any image-based
steganographic system are the quality of the stegoimage and the capacity of the cover image. This paper proposes a novel and high capacity steganographic approach based on Discrete Cosine Transformation (DCT) and JPEG compression. JPEG technique divides the input image into non-overlapping blocks of 8x8 pixels and uses the DCT transformation. However, our proposed method divides the cover image into nonoverlapping
blocks of 16x16 pixels. For each quantized
DCT block, the least two-significant bits (2-LSBs) of each middle frequency coefficient are modified to embed two secret bits. Our aim is to investigate the data hiding efficiency using larger blocks for JPEG compression. Our experiment result shows that the proposed approach can provide a higher information hiding capacity than Jpeg-Jsteg and Chang et al. methods based on the conventional blocks of 8x8 pixels. Furthermore, the produced stego-images are almost identical to the original cover images
JPEG steganography: A performance evaluation of quantization tables
The two most important aspects of any image based steganographic system are the imperceptibility and the capacity of the stego image. This paper evaluates the performance and efficiency of using optimized quantization tables instead of default JPEG tables within JPEG steganography. We found that using optimized tables significantly improves the quality of stego-images. Moreover, we used this optimization strategy to generate a 16x16 quantization table to be used instead of that suggested. The quality of stego-images was greatly improved when these optimized tables were used. This led us to suggest a new hybrid steganographic method in order to increase the embedding capacity. This new method is based on both and Jpeg-Jsteg methods. In this method, for each 16x16 quantized DCT block, the least two significant bits (2-LSBs) of each middle frequency coefficient are modified to embed two secret bits. Additionally, the Jpeg-Jsteg embedding technique is used for the low frequency DCT coefficients without modifying the DC coefficient. Our experimental results show that the proposed approach can provide a higher information-hiding capacity than the other methods tested. Furthermore, the quality of the produced stego-images is better than that of other methods which use the default tables
SecMon: End-to-End Quality and Security Monitoring System
The Voice over Internet Protocol (VoIP) is becoming a more available and
popular way of communicating for Internet users. This also applies to
Peer-to-Peer (P2P) systems and merging these two have already proven to be
successful (e.g. Skype). Even the existing standards of VoIP provide an
assurance of security and Quality of Service (QoS), however, these features are
usually optional and supported by limited number of implementations. As a
result, the lack of mandatory and widely applicable QoS and security guaranties
makes the contemporary VoIP systems vulnerable to attacks and network
disturbances. In this paper we are facing these issues and propose the SecMon
system, which simultaneously provides a lightweight security mechanism and
improves quality parameters of the call. SecMon is intended specially for VoIP
service over P2P networks and its main advantage is that it provides
authentication, data integrity services, adaptive QoS and (D)DoS attack
detection. Moreover, the SecMon approach represents a low-bandwidth consumption
solution that is transparent to the users and possesses a self-organizing
capability. The above-mentioned features are accomplished mainly by utilizing
two information hiding techniques: digital audio watermarking and network
steganography. These techniques are used to create covert channels that serve
as transport channels for lightweight QoS measurement's results. Furthermore,
these metrics are aggregated in a reputation system that enables best route
path selection in the P2P network. The reputation system helps also to mitigate
(D)DoS attacks, maximize performance and increase transmission efficiency in
the network.Comment: Paper was presented at 7th international conference IBIZA 2008: On
Computer Science - Research And Applications, Poland, Kazimierz Dolny
31.01-2.02 2008; 14 pages, 5 figure
Comparative Analysis of Hybrid Algorithms in Information Hiding
In this present work, propose comparative algorithms to conceal information into the image using steganography method. The proposedalgorithms use binary codes and pixels inside an image. The zipped file is used before it is transformed to binary codes to make the most of the storage of data inside the image. By applying the algorithms, a system called Steganography Imaging Information System (SIIS) is developed. The system is then tested to see the viability of the proposed algorithm. Different sizes of data are stored inside the images and the PSNR (Peak signal-to-noise ratio) is also captured for each of the images tested. According to the PSNR value of each image, the concealed image has a higher PSNR value. Therefore, this new steganography algorithm efficiently hides the data in the image
A comparative study of steganography using watermarking and modifications pixels versus least significant bit
This article presents a steganography proposal based on embedding data expressed in base 10 by directly replacing the pixel values from images red, green blue (RGB) with a novel compression technique based on watermarks. The method considers a manipulation of the object to be embedded through a data compression triple process via LZ77 and base 64, watermark from low-quality images, embedded via discrete wavelet transformation-singular value decomposition (DWT-SVD), message embedded by watermark is recovered with data loss calculated, the watermark image and lost data is compressed again using LZ77 and base 64 to generate the final message. The final message is embedded in portable network graphic (PNG) images taken from the Microsoft common objects in context (COCO), ImageNet and uncompressed color image database (UCID) datasets, through a filtering process pixel of the images, where the selected pixels expressed in base 10, and the final message data is embedded by replacing unitsâ position of each pixel. In experimentation results an average of 40 dB in peak signal noise to ratio (PSNR) and 0.98 in the similarity structural index metric (SSIM) evaluation were obtained, and evasion steganalysis rates of up to 93% for stego-images, the data embedded average is 3.2 bpp
A new efficient block matching data hiding method based on scanning order selection in medical images
Digital technology and the widespread use of the Internet has increased the speeds at which digital data can be obtained and shared in daily life. In parallel to this, there are important concerns regarding the confidentiality of private data during data transmissions and the possibility that data might fall into the hands of third parties. Issues relating to data safety can also affect patients' medical images and other information relating to these images. In this study, we propose a new method based on block matching that can be used to hide the patient information in medical images. In this method, 8 scanning orders (6 of which are newly designed) are developed to provide high image quality. By diversifying the number of scanning orders, we aim to achieve the lowest number of bit changes. The performance of the developed method is measured using the number of bits subject to change, the peak signal-to-noise ratio and the mean structural similarity index measure image quality assessment metrics, and steganalysis attacks. The method we developed was found to be more effective in hiding data compared to the classical least significant bit method.https://doi.org/10.3906/elk-1506-18
- âŠ