Estimating Epipolar Geometry With The Use of a Camera Mounted Orientation Sensor

Context: Image processing and computer vision are rapidly becoming more and more commonplace, and the amount of information about a scene, such as 3D geometry, that can be obtained from an image, or multiple images of the scene is steadily increasing due to increasing resolutions and availability of imaging sensors, and an active research community. In parallel, advances in hardware design and manufacturing are allowing for devices such as gyroscopes, accelerometers and magnetometers and GPS receivers to be included alongside imaging devices at a consumer level. Aims: This work aims to investigate the use of orientation sensors in the field of computer vision as sources of data to aid with image processing and the determination of a scene’s geometry, in particular, the epipolar geometry of a pair of images - and devises a hybrid methodology from two sets of previous works in order to exploit the information available from orientation sensors alongside data gathered from image processing techniques. Method: A readily available consumer-level orientation sensor was used alongside a digital camera to capture images of a set of scenes and record the orientation of the camera. The fundamental matrix of these pairs of images was calculated using a variety of techniques - both incorporating data from the orientation sensor and excluding its use Results: Some methodologies could not produce an acceptable result for the Fundamental Matrix on certain image pairs, however, a method described in the literature that used an orientation sensor always produced a result - however in cases where the hybrid or purely computer vision methods also produced a result - this was found to be the least accurate. Conclusion: Results from this work show that the use of an orientation sensor to capture information alongside an imaging device can be used to improve both the accuracy and reliability of calculations of the scene’s geometry - however noise from the orientation sensor can limit this accuracy and further research would be needed to determine the magnitude of this problem and methods of mitigation

CAVASS: A Computer-Assisted Visualization and Analysis Software System

The Medical Image Processing Group at the University of Pennsylvania has been developing (and distributing with source code) medical image analysis and visualization software systems for a long period of time. Our most recent system, 3DVIEWNIX, was first released in 1993. Since that time, a number of significant advancements have taken place with regard to computer platforms and operating systems, networking capability, the rise of parallel processing standards, and the development of open-source toolkits. The development of CAVASS by our group is the next generation of 3DVIEWNIX. CAVASS will be freely available and open source, and it is integrated with toolkits such as Insight Toolkit and Visualization Toolkit. CAVASS runs on Windows, Unix, Linux, and Mac but shares a single code base. Rather than requiring expensive multiprocessor systems, it seamlessly provides for parallel processing via inexpensive clusters of work stations for more time-consuming algorithms. Most importantly, CAVASS is directed at the visualization, processing, and analysis of 3-dimensional and higher-dimensional medical imagery, so support for digital imaging and communication in medicine data and the efficient implementation of algorithms is given paramount importance

Real-Time Vision System for License Plate Detection and Recognition on FPGA

Rapid development of the Field Programmable Gate Array (FPGA) offers an alternative way to provide acceleration for computationally intensive tasks such as digital signal and image processing. Its ability to perform parallel processing shows the potential in implementing a high speed vision system. Out of numerous applications of computer vision, this paper focuses on the hardware implementation of one that is commercially known as Automatic Number Plate Recognition (ANPR).Morphological operations and Optical Character Recognition (OCR) algorithms have been implemented on a Xilinx Zynq-7000 All-Programmable SoC to realize the functions of an ANPR system. Test results have shown that the designed and implemented processing pipeline that consumed 63 % of the logic resources is capable of delivering the results with relatively low error rate. Most importantly, the computation time satisfies the real-time requirement for many ANPR applications

Accelerating 3D medical image segmentation with high performance computing

Digital processing of medical images has helped physicians and patients during past years by allowing examination and diagnosis on a very precise level. Nowadays possibly the biggest deal of support it can offer for modern healthcare is the use of high performance computing architectures to treat the huge amounts of data that can be collected by modern acquisition devices. This paper presents a parallel processing implementation of an image segmentation algorithm that operates on a computer cluster equipped with 10 processing units. Thanks to well-organized distribution of the workload we manage to significantly shorten the execution time of the developed algorithm and reach a performance gain very close to linear

New Techniques in Scene Understanding and Parallel Image Processing.

There has been tremendous research interest in the areas of computer and robotic vision. Scene understanding and parallel image processing are important paradigms in computer vision. New techniques are presented to solve some of the problems in these paradigms. Automatic interpretation of features in a natural scene is the focus of the first part of the dissertation. The proposed interpretation technique consists of a context dependent feature labeling algorithm using non linear probabilistic relaxation, and an expert system. Traditionally, the output of the labeling is analyzed, and then recognized by a high level interpreter. In this new approach, the knowledge about the scene is utilized to resolve the inconsistencies introduced by the labeling algorithm. A feature labeling system based on this hybrid technique is designed and developed. The labeling system plays a vital role in the development of an automatic image interpretation system for oceanographic satellite images. An extensive study on the existing interpretation techniques has been made in the related areas such as remote sensing, medical diagnosis, astronomy, and oceanography and has shown that our hybrid approach is unique and powerful. The second part of the dissertation presents the results in the area of parallel image processing. A new approach for parallelizing vision tasks in the low and intermediate levels is introduced. The technique utilizes schemes to embed the inherent data or computational structure, used to solve the problem, into parallel architectures such as hypercubes. The important characteristic of the technique is that the adjacent pixels in the image are mapped to nodes that are at a constant distance in the hypercube. Using the technique, parallel algorithms for neighbor-finding and digital distances are developed. A parallel hypercube sorting algorithm is obtained as an illustration of the technique. The research in developing these embedding algorithms has paved the way for efficient reconfiguration algorithms for hypercube architectures

FPGA Implementation of Hand-written Number Recognition Based on CNN

Convolutional Neural Networks (CNNs) are the state-of-the-art in computer vision for different purposes such as image and video classification, recommender systems and natural language processing. The connectivity pattern between CNNs neurons is inspired by the structure of the animal visual cortex. In order to allow the processing, they are realized with multiple parallel 2-dimensional FIR filters that convolve the input signal with the learned feature maps.  For this reason, a CNN implementation requires highly parallel computations that cannot be achieved using traditional general-purpose processors, which is why they benefit from a very significant speed-up when mapped and run on Field Programmable Gate Arrays (FPGAs). This is because FPGAs offer the capability to design full customizable hardware architectures, providing high flexibility and the availability of hundreds to thousands of on-chip Digital Signal Processing (DSP) blocks. This paper presents an FPGA implementation of a hand-written number recognition system based on CNN. The system has been characterized in terms of classification accuracy, area, speed, and power consumption. The neural network was implemented on a Xilinx XC7A100T FPGA, and it uses 29.69% of Slice LUTs, 4.42% of slice registers and 52.50% block RAMs. We designed the system using a 9-bit representation that allows for avoiding the use of DSP. For this reason, multipliers are implemented using LUTs. The proposed architecture can be easily scaled on different FPGA devices thank its regularity. CNN can reach a classification accuracy of 90%

GPU acceleration of a model-based iterative method for Digital Breast Tomosynthesis

Digital Breast Tomosynthesis (DBT) is a modern 3D Computed Tomography X-ray technique for the early detection of breast tumors, which is receiving growing interest in the medical and scientific community. Since DBT performs incomplete sampling of data, the image reconstruction approaches based on iterative methods are preferable to the classical analytic techniques, such as the Filtered Back Projection algorithm, providing fewer artifacts. In this work, we consider a Model-Based Iterative Reconstruction (MBIR) method well suited to describe the DBT data acquisition process and to include prior information on the reconstructed image. We propose a gradient-based solver named Scaled Gradient Projection (SGP) for the solution of the constrained optimization problem arising in the considered MBIR method. Even if the SGP algorithm exhibits fast convergence, the time required on a serial computer for the reconstruction of a real DBT data set is too long for the clinical needs. In this paper we propose a parallel SGP version designed to perform the most expensive computations of each iteration on Graphics Processing Unit (GPU). We apply the proposed parallel approach on three different GPU boards, with computational performance comparable with that of the boards usually installed in commercial DBT systems. The numerical results show that the proposed GPU-based MBIR method provides accurate reconstructions in a time suitable for clinical trials