16,920 research outputs found
Recommended from our members
Spatial data stream multiplexing scheme for high-throughput WLANs
A novel scheme using spatial data stream multiplexing (SDSM) in the upcoming multiple-input multipleoutput (MIMO)-based IEEE 802.11n physical layer is proposed. It is shown that with SDSM, the same data rate can be achieved by using less number of transmit and receive antennas and therefore this scheme can reduce the number of antennas which results in reducing mutual coupling effects, hardware costs and implementation complexities. The maximum data rates that can be achieved using a 2 * 2 MIMO system is 270 Mbps and for a 4 * 4 MIMO system is 540 Mbps. The same data rates can be achieved using the SDSM technique which reduces the 2 * 2 MIMO system to 1 * 1 SISO system and the 4 * 4 MIMO system to a 2 * 2 MIMO system
Design guidelines for spatial modulation
A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants
Interference-Mitigating Waveform Design for Next-Generation Wireless Systems
A brief historical perspective of the evolution of waveform designs employed in consecutive generations of wireless communications systems is provided, highlighting the range of often conflicting demands on the various waveform characteristics. As the culmination of recent advances in the field the underlying benefits of various Multiple Input Multiple Output (MIMO) schemes are highlighted and exemplified. As an integral part of the appropriate waveform design, cognizance is given to the particular choice of the duplexing scheme used for supporting full-duplex communications and it is demonstrated that Time Division Duplexing (TDD) is substantially outperformed by Frequency Division Duplexing (FDD), unless the TDD scheme is combined with further sophisticated scheduling, MIMOs and/or adaptive modulation/coding. It is also argued that the specific choice of the Direct-Sequence (DS) spreading codes invoked in DS-CDMA predetermines the properties of the system. It is demonstrated that a specifically designed family of spreading codes exhibits a so-called interference-free window (IFW) and hence the resultant system is capable of outperforming its standardised counterpart employing classic Orthogonal Variable Spreading Factor (OVSF) codes under realistic dispersive channel conditions, provided that the interfering multi-user and multipath components arrive within this IFW. This condition may be ensured with the aid of quasisynchronous adaptive timing advance control. However, a limitation of the system is that the number of spreading codes exhibiting a certain IFW is limited, although this problem may be mitigated with the aid of novel code design principles, employing a combination of several spreading sequences in the time-frequency and spatial-domain. The paper is concluded by quantifying the achievable user load of a UTRA-like TDD Code Division Multiple Access (CDMA) system employing Loosely Synchronized (LS) spreading codes exhibiting an IFW in comparison to that of its counterpart using OVSF codes. Both system's performance is enhanced using beamforming MIMOs
Multi-standard programmable baseband modulator for next generation wireless communication
Considerable research has taken place in recent times in the area of
parameterization of software defined radio (SDR) architecture. Parameterization
decreases the size of the software to be downloaded and also limits the
hardware reconfiguration time. The present paper is based on the design and
development of a programmable baseband modulator that perform the QPSK
modulation schemes and as well as its other three commonly used variants to
satisfy the requirement of several established 2G and 3G wireless communication
standards. The proposed design has been shown to be capable of operating at a
maximum data rate of 77 Mbps on Xilinx Virtex 2-Pro University field
programmable gate array (FPGA) board. The pulse shaping root raised cosine
(RRC) filter has been implemented using distributed arithmetic (DA) technique
in the present work in order to reduce the computational complexity, and to
achieve appropriate power reduction and enhanced throughput. The designed
multiplier-less programmable 32-tap FIR-based RRC filter has been found to
withstand a peak inter-symbol interference (ISI) distortion of -41 dB
Development of a dc-ac power conditioner for wind generator by using neural network
This project present of development single phase DC-AC converter for wind
generator application. The mathematical model of the wind generator and Artificial
Neural Network control for DC-AC converter is derived. The controller is designed to
stabilize the output voltage of DC-AC converter. To verify the effectiveness of the
proposal controller, both simulation and experimental are developed. The simulation and
experimental result show that the amplitude of output voltage of the DC-AC converter
can be controlled
Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems
Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER
Performance analysis of modified asymmetrically-clipped optical orthogonal frequency-division multiplexing systems
A modification to the Asymmetrically-Clipped Optical Orthogonal Frequency-Division Multiplexing (ACO-OFDM) technique is proposed through unipolar encoding. A performance analysis of the Bit Error Rate (BER) is developed and Monte Carlo simulations are carried out to verify the analysis. Results are compared to that of the corresponding ACO-OFDM system under the same bit energy and transmission rate; an improvement of 1 dB is obtained at a BER of 10-4. In addition, the performance of the proposed system in the presence of atmospheric turbulence is investigated using single-input multiple-output (SIMO) configuration and its performance under that environment is compared to that of ACO-OFDM. Energy improvements of 4 dB and 2.2 dB are obtained at a BER of 10-4 for SIMO systems of 1 and 2 photodetectors at the receiver for the case of strong turbulence, respectively
- âŠ