Lazy transition systems: application to timing optimization of asynchronous circuits

The paper introduces Lazy Transitions Systems (LzTSs). The notion of laziness explicitly distinguishes between the enabling and the firing of an event in a transition system. LzTSs can be effectively used to model the behavior of asynchronous circuits in which relative timing assumptions can be made on the occurrence of events. These assumptions can be derived from the information known a priori about the delay of the environment and the timing characteristics of the gates that will implement the circuit. The paper presents necessary conditions to synthesize circuits with a correct behavior under the given timing assumptions. Preliminary results show that significant area and performance improvements can be obtained by exploiting the extra "don't care" space implicitly provided by the laziness of the events.Peer ReviewedPostprint (author's final draft

Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award

Lazy transition systems and asynchronous circuit synthesis with relative timing assumptions

Journal ArticleThis paper presents a design flow for timed asynchronous circuits. It introduces lazy transitions systems as a new computational model to represent the timing information required for synthesis. The notion of laziness explicitly distinguishes between the enabling and the firing of an event in a transition system. Lazy transition systems can be effectively used to model the behavior of asynchronous circuits in which relative timing assumptions can be made on the occurrence of events. These assumptions can be derived from the information known a priori about the delay of the environment and the timing characteristics of the gates that will implement the circuit. The paper presents necessary conditions to generate circuits and a synthesis algorithm that exploits the timing assumptions for optimization. It also proposes a method for back-annotation that derives a set of sufficient timing constraints that guarantee the correctness of the circuit

Interpreted graph models

A model class called an Interpreted Graph Model (IGM) is defined. This class includes a large number of graph-based models that are used in asynchronous circuit design and other applications of concurrecy. The defining characteristic of this model class is an underlying static graph-like structure where behavioural semantics are attached using additional entities, such as tokens or node/arc states. The similarities in notation and expressive power allow a number of operations on these formalisms, such as visualisation, interactive simulation, serialisation, schematic entry and model conversion to be generalised. A software framework called Workcraft was developed to take advantage of these properties of IGMs. Workcraft provides an environment for rapid prototyping of graph-like models and related tools. It provides a large set of standardised functions that considerably facilitate the task of providing tool support for any IGM. The concept of Interpreted Graph Models is the result of research on methods of application of lower level models, such as Petri nets, as a back-end for simulation and verification of higher level models that are more easily manipulated. The goal is to achieve a high degree of automation of this process. In particular, a method for verification of speed-independence of asynchronous circuits is presented. Using this method, the circuit is specified as a gate netlist and its environment is specified as a Signal Transition Graph. The circuit is then automatically translated into a behaviourally equivalent Petri net model. This model is then composed with the specification of the environment. A number of important properties can be established on this compound model, such as the absence of deadlocks and hazards. If a trace is found that violates the required property, it is automatically interpreted in terms of switching of the gates in the original gate-level circuit specification and may be presented visually to the circuit designer. A similar technique is also used for the verification of a model called Static Data Flow Structure (SDFS). This high level model describes the behaviour of an asynchronous data path. SDFS is particularly interesting because it models complex behaviours such as preemption, early evaluation and speculation. Preemption is a technique which allows to destroy data objects in a computation pipeline if the result of computation is no longer needed, reducing the power consumption. Early evaluation allows a circuit to compute the output using a subset of its inputs and preempting the inputs which are not needed. In speculation, all conflicting branches of computation run concurrently without waiting for the selecting condition; once the selecting condition is computed the unneeded branches are preempted. The automated Petri net based verification technique is especially useful in this case because of the complex nature of these features. As a result of this work, a number of cases are presented where the concept of IGMs and the Workcraft tool were instrumental. These include the design of two different types of arbiter circuits, the design and debugging of the SDFS model, synthesis of asynchronous circuits from the Conditional Partial Order Graph model and the modification of the workflow of Balsa asynchronous circuit synthesis system.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo

Compositional approach to design of digital circuits

PhD ThesisIn this work we explore compositional methods for design of digital circuits with the aim of improving existing methodoligies for desigh reuse. We address compositionality techniques looking from both structural and behavioural perspectives. First we consider the existing method of handshake circuit optimisation via control path resynthesis using Petri nets, an approach using structural composition. In that approach labelled Petri net parallel composition plays an important role and we introduce an improvement to the parallel composition algorithm, reducing the number of redundant places in the resulting Petri net representations. The proposed algorithm applies to labelled Petri nets in general and can be applied outside of the handshake circuit optimisation use case. Next we look at the conditional partial order graph (CPOG) formalism, an approach that allows for a convenient representation of systems consisting of multiple alternative system behaviours, a phenomenon we call behavioural composition. We generalise the notion of CPOG and identify an algebraic structure on a more general notion of parameterised graph. This allows us to do equivalence-preserving manipulation of graphs in symbolic form, which simplifies specification and reasoning about systems defined in this way, as displayed by two case studies. As a third contribution we build upon the previous work of CPOG synthesis used to generate binary encoding of microcontroller instruction sets and design the corresponding instruction decoder logic. The proposed CPOG synthesis technique solves the optimisation problem for the general case, reducing it to Boolean satisfiability problem and uses existing SAT solving tools to obtain the result.This work was supported by a studentship from Newcastle University EECE school, EPSRC grant EP/G037809/1 (VERDAD) and EPSRC grant EP/K001698/1 (UNCOVER). i

CAD directions for high performance asynchronous circuits

Journal ArticleThis paper describes a novel methodology for high performance asynchronous design based on timed circuits and on CAD support for their synthesis using Relative Timing. This methodology was developed for a prototype iA32 instruction length decoding and steering unit called RAPPID ("Revolving Asynchronous Pentium® Processor Instruction Decoder") that was fabricated and tested successfully. Silicon results show significant advantages - in particular, performance of 2.5-4.5 instructions per nS - with manageable risks using this design technology. RAPPID achieves three times faster performa the power and requiring a minor area penalty as a comparable 400MHz clocked circuit. Relative Timing is based on user-defined and automatically extracted relative tinning assumptions between signal transitions in a circuit and its environment. It supports the specification, synthesis, and verification of high-performance asynchronous circuits, such as pulse-mode circuits, that can be derived from an initial speed-independent specification. Relative timing presents a "middle-ground" between clocked and asynchronous circuits, and is a fertile area for CAD development. We discuss possible directions for future CAD development

Deriving Petri nets from finite transition systems

This paper presents a novel method to derive a Petri net from any specification model that can be mapped into a state-based representation with arcs labeled with symbols from an alphabet of events (a Transition System, TS). The method is based on the theory of regions for Elementary Transition Systems (ETS). Previous work has shown that, for any ETS, there exists a Petri Net with minimum transition count (one transition for each label) with a reachability graph isomorphic to the original Transition System. Our method extends and implements that theory by using the following three mechanisms that provide a framework for synthesis of safe Petri nets from arbitrary TSs. First, the requirement of isomorphism is relaxed to bisimulation of TSs, thus extending the class of synthesizable TSs to a new class called Excitation-Closed Transition Systems (ECTS). Second, for the first time, we propose a method of PN synthesis for an arbitrary TS based on mapping a TS event into a set of transition labels in a PN. Third, the notion of irredundant region set is exploited, to minimize the number of places in the net without affecting its behavior. The synthesis method can derive different classes of place-irredundant Petri Nets (e.g., pure, free choice, unique choice) from the same TS, depending on the constraints imposed on the synthesis algorithm. This method has been implemented and applied in different frameworks. The results obtained from the experiments have demonstrated the wide applicability of the method.Peer ReviewedPostprint (published version

Synthesis and Optimization of Pipelined Packet Processors

We consider pipelined architectures of packet processors consisting of a sequence of simple packet-processing modules interconnected by first-in first-out buffers. We propose a new model for describing their function, an automated synthesis technique that generates efficient hardware for them, and an algorithm for computing minimum buffer sizes that allow such pipelines to achieve their maximum throughput. Our functional model provides a level of abstraction familiar to a network protocol designer; in particular, it does not require knowledge of register-transfer-level hardware design. Our synthesis tool implements the specified function in a sequential circuit that processes packet data a word at a time. Finally, our analysis technique computes the maximum throughput possible from the modules and then determines the smallest buffers that can achieve it. Experimental results conducted on industrial-strength examples suggest that our techniques are practical. Our synthesis algorithm can generate circuits that achieve 40 Gb/s on field-programmable gate arrays, equal to state-of-the-art manual implementations, and our buffer-sizing algorithm has a practically short runtime. Together, our techniques make it easier to quickly develop and deploy high-speed network switches