In-wheel motor vibration control for distributed-driven electric vehicles:A review

Efficient, safe, and comfortable electric vehicles (EVs) are essential for the creation of a sustainable transport system. Distributed-driven EVs, which often use in-wheel motors (IWMs), have many benefits with respect to size (compactness), controllability, and efficiency. However, the vibration of IWMs is a particularly important factor for both passengers and drivers, and it is therefore crucial for a successful commercialization of distributed-driven EVs. This paper provides a comprehensive literature review and state-of-the-art vibration-source-analysis and -mitigation methods in IWMs. First, selection criteria are given for IWMs, and a multidimensional comparison for several motor types is provided. The IWM vibration sources are then divided into internally-, and externally-induced vibration sources and discussed in detail. Next, vibration reduction methods, which include motor-structure optimization, motor controller, and additional control-components, are reviewed. Emerging research trends and an outlook for future improvement aims are summarized at the end of the paper. This paper can provide useful information for researchers, who are interested in the application and vibration mitigation of IWMs or similar topics

A Novel Design Optimization of a Fault-Tolerant AC Permanent Magnet Machine-Drive System

In this dissertation, fault-tolerant capabilities of permanent magnet (PM) machines were investigated. The 12-slot 10-pole PM machines with V-type and spoke-type PM layouts were selected as candidate topologies for fault-tolerant PM machine design optimization problems. The combination of 12-slot and 10-pole configuration for PM machines requires a fractional-slot concentrated winding (FSCW) layout, which can lead to especially significant PM losses in such machines. Thus, a hybrid method to compute the PM losses was investigated, which combines computationally efficient finite-element analysis (CE-FEA) with a new analytical formulation for PM eddy-current loss computation in sine-wave current regulated synchronous PM machines. These algorithms were applied to two FSCW PM machines with different circumferential and axial PM block segmentation arrangements. The accuracy of this method was validated by results from 2D and 3D time-stepping FEA. The CE-FEA approach has the capabilities of calculating torque profiles, induced voltage waveforms, d and q-axes inductances, torque angle for maximum torque per ampere load condition, and stator core losses. The implementation techniques for such a method are presented. A combined design optimization method employing design of experiments (DOE) and differential evolution (DE) algorithms was developed. The DOE approaches were used to perform a sensitivity study from which significant independent design variables were selected for the DE design optimization procedure. Two optimization objectives are concurrently considered for minimizing material cost and power losses. The optimization results enabled the systematic comparison of four PM motor topologies: two different V-shape, flat bar-type and spoke-type, respectively. A study of the relative merits of each topology was determined. An automated design optimization method using the CE-FEA and DE algorithms was utilized in the case study of a 12-slot 10-pole PM machine with V-type PM layout. An engineering decision process based on the Pareto-optimal front for two objectives, material cost and losses, is presented together with discussions on the tradeoffs between cost and performance. One optimal design was finally selected and prototyped. A set of experimental tests, including open circuit tests at various speeds and on-load tests under various load and speed conditions, were performed successfully, which validated the findings of this work

Investigation of novel multi-layer spoke-type ferrite interior permanent magnet machines

The permanent magnet synchronous machines have been attracting more and more attention due to the advantages of high torque density, outstanding efficiency and maturing technologies. Under the urges of mandatory energy efficiency requirements, they are considered as the most potential candidates to replace the comparatively low-efficient induction machines which dominate the industrial market. However, most of the high performance permanent magnet machines are based on high cost rare-earth materials. Thus, there will be huge demands for low-cost high-performance permanent magnet machines. Ferrite magnet is inexpensive and abundant in supply, and is considered as the most promising alternative to achieve the goal of low cost and high performance. In consideration of the low magnetic energy, this thesis explored the recent developments and possible ideas of ferrite machines, and proposed a novel multi-layer spoke-type interior permanent magnet configuration combining the advantages of flux focusing technique and multi-layer structure. With comparable material cost to induction machines, the proposed ferrite magnet design could deliver 27% higher power with 2-4% higher efficiency with exactly the same frame size. Based on the data base of International Energy Agency (IEA), electricity consumed by electric machines reached 7.1PWh in 2006 [1]. Considering that induction machines take up 90% of the overall industrial installation, the potential energy savings is enormous. This thesis contributes in five key aspects towards the investigation and design of low-cost high-performance ferrite permanent magnet machines. Firstly, accurate analytical models for the multi-layer configurations were developed with the consideration of spatial harmonics, and provided effective yet simple way for preliminary design. Secondly, the influence of key design parameters on performance of the multi-layer ferrite machines were comprehensively investigated, and optimal design could be carried out based on the insightful knowledge revealed. Thirdly, systematic investigation of the demagnetization mechanism was carried out, focusing on the three key factors: armature MMF, intrinsic coercivity and working temperature. Anti-demagnetization designs were presented accordingly to reduce the risk of performance degradation and guarantee the safe operation under various loading conditions. Then, comparative study was carried out with a commercial induction machine for verification of the superior performance of the proposed ferrite machine. Without loss of generality, the two machines had identical stator cores, same rotor diameter and stacking length. Under the operating condition of same stator copper loss, the results confirmed the superior performance of the ferrite machine in terms of torque density, power factor and efficiency. Lastly, mechanical design was discussed to reduce the cost of mass production, and the experimental effort on the prototype machine validates the advantageous performance as well as the analytical and FEA predictions

Study of innovative electric machines for high efficiency vehicular traction applications

This thesis collects some of the work accomplished during the PhD research activity focused on the study of special electric machines for vehicle traction applications. The work is divided into due parts. The rst part is mainly technological and covers some studies and experimental activities concerning new technical solutions to solve some common issues in operation of electric motors for automotive use, namely ux weakening and cogging torque. The second part has a more theoretical nature and focuses on some methods for electric machine modeling and analysis which has been developed to facilitate the study and design optimizations carried out during the PhD research work. The chapters in the rst part address the following topics: 1. Development and testing of an interior-permanent-magnet motor prototype fully conceived, designed and manufactured at the University of Trieste to implement a new concept of flux weakening system at high speeds. The concept has been also protected through a pending patent. 2. Multi-objective design optimization of an interior permanent magnet reluctance-assisted synchronous motor for the automotive industry. The design optimization was meant to support an industrial development project which is still in progress so no prototype has been built yet. 3. Study of a new optimized magnetic wedge design capable of reducing cogging torque in automotive propulsion motors having open stator slots. The second part proposes some analytical and numerical results that have been worked out to approach the modeling and optimization of various kinds of permanent magnet synchronous motors. The main problem to which these chapters try to answer is to nd suciently fast but accurate methods for permanent magnet analysis without time-consuming finite-element transient analysis. The proposed methods have been successfully integrated into design optimization programs used in the industrial environment in the development of innovative electric machines not only for the automotive industry

Mathematical Models for the Design of Electrical Machines

This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations

Advances in Rotating Electric Machines

It is difficult to imagine a modern society without rotating electric machines. Their use has been increasing not only in the traditional fields of application but also in more contemporary fields, including renewable energy conversion systems, electric aircraft, aerospace, electric vehicles, unmanned propulsion systems, robotics, etc. This has contributed to advances in the materials, design methodologies, modeling tools, and manufacturing processes of current electric machines, which are characterized by high compactness, low weight, high power density, high torque density, and high reliability. On the other hand, the growing use of electric machines and drives in more critical applications has pushed forward the research in the area of condition monitoring and fault tolerance, leading to the development of more reliable diagnostic techniques and more fault-tolerant machines. This book presents and disseminates the most recent advances related to the theory, design, modeling, application, control, and condition monitoring of all types of rotating electric machines

Optimisation de la Conception du Moteur Synchrone à Excitation Hybride pour Véhicules Électriques à Haut Performance

Since 1970, the ever-growing concerns of human community for the life-threatening environmental changes have pushed the policy makers to decarbonize those sectors with high energy demands, including the transportation industry. Optimal designs of Electric Vehicles (EVs) can contribute to today’s exigent car market, and take the leading role for future sustainable transportation of human and goods. At the heart of electromechanical energy conversion lays the electrical machines, which have attracted lots of interests and efforts for efficiency increase and cost reduction. In this thesis, a methodology is proposed and implemented to design and optimize the cost and efficiency of a Hybrid Excitation Synchronous Machine (HESM) for a given vehicle and a desired driving cycle. Hybridization in the excitation system can combine the favorable qualities of high-torque at low-speed with superior overloading capability, exceptional flux weakening and extended Constant Power Speed Range (CPSR), high efficiency, and flexible controllability in motoring and generation modes. With HESM technology, we can also shift from the rare-earth magnets towards the cheap ferrite magnets and guaranty the supply for motor industry. The designed HESM in this work responds to three requirements of the vehicle, namely, the maximum cruising speed, acceleration time, and gradeability, with the least or null overdesign in the drivetrain. At the same time, it will have the maximum global efficiency over the driving cycle, and the minimum cost for the material. The optimization is conducted at either of the component and system levels. The optimization at component-level is developed based on the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). A new formulation for the objective functions is proposed, which deals with the design optimization and cost minimization, simultaneously. To maximize the efficiency, a system-level search is conducted to find the optimum HESM with the highest global efficiency over a given driving cycle. Due to the 3D direction of magnetic flux in the selected HESM topology, the Finite Element Analysis (FEA) was very time- and process-consuming. To be able to evaluate the objective functions during the optimization, a new model has been developed based on a 3D Magnetic Equivalent Circuit (MEC) network. This model predicts well the non-linearity of magnetic materials, as compared with the FEA simulations. At last, the final optimized HESM is evaluated by the virtue of FEA technique.Depuis 1970, les préoccupations de l’humanité envers les changements climatiques ont poussé les chercheurs à faire des études approfondies pour optimiser les machines électriques pour avoir des véhicules électriques plus performants et moins énergivores. La conception optimale de véhicules électriques (EV) peut contribuer pour un marché automobile plus exigeant et jouer un rôle principal pour le futur du transport durable des biens et des personnes. Les machines électriques se trouvent au cœur de la conversion d'énergie électromécanique, qui ont suscité beaucoup d'intérêts et d’efforts pour augmenter leur rendement et réduire leur coût. Cette thèse propose une méthodologie et une mise en œuvre pour minimiser le coût et maximiser l’efficacité d’une machine synchrone à excitation hybride (HESM) pour un véhicule donné et un cycle de conduite sélectionné. L'hybridation du système d’excitation peut combiner les qualités favorables comme un couple élevé à basse vitesse avec une capacité de surcharge supérieure, un défluxage exceptionnelle et une plage de vitesse prolongée de puissance constante (CPSR), une efficacité élevée et une contrôlabilité flexible dans les modes de traction et de freinage régénératif. Avec la technologie HESM, nous pouvons également passer des aimants de terres rares aux aimants en ferrite bon marché, et garantir l’approvisionnement pour l’industrie automobile. Le HESM conçu dans ce travail répond à trois exigences du véhicule : la vitesse de croisière maximale, le temps d’accélération et la capacité de monter une pente, avec un surdimensionnement minimal ou nulle de la chaîne de traction. Une optimisation multiniveau avec une interaction entre la vision composant et la vision système est proposée et validée. L’optimisation au niveau du composant est développée sur la base de l’algorithme génétique de tri non dominé (NSGA-II). Une nouvelle formulation pour les fonctions objectives est proposée pour l’optimisation simultanée de la conception de la machine et de la minimisation de son coût. Après avoir optimisés onze HESM au niveau du composant, pour maximiser l’efficacité, une optimisation au niveau du système est réalisée pour trouver le HESM optimal avec le plus haut rendement global sur le cycle de conduite donné. Une validation de la conception finale de la HESM présente un meilleur rendement global sur le cycle de conduite de 18,65% en relation à une machine synchrone à excitation séparée équivalente et 15,8% en relation à une à aiment permanent. En raison de la direction 3D du flux magnétique dans la topologie HESM sélectionnée, l’analyse par éléments finis (FEA) prenait beaucoup de temps et de ressources computationnelles. Afin d’évaluer les fonctions objectives lors de l’optimisation, un nouveau modèle a été développé basé sur un réseau de circuits magnétiques équivalents 3D (MEC). Ce modèle prédit bien la non-linéarité des matériaux magnétiques, par rapport aux simulations FEA. Enfin, le HESM optimisé final est évalué grâce à la technique FEA

A Vector Controlled Drive for Parameter Evaluation of Variable Flux Machines

Variable flux machine is a new class of permanent magnet machines that combine the flux controllability in wound field synchronous machines, and the high efficiency due to permanent magnets. An AlNiCo based variable flux machine whose air-gap flux is varied by applying a direct axis current pulse is considered in this work. This thesis reviews the dq model of permanent magnet machines, which is then modified to account for flux controllability in variable flux machines. The existing inductance measurement methods are analyzed, and a vector control technique that is fast in the measurement of current dependent inductances at various magnetization level is proposed. The accuracy of the method is assessed by comparing it with the flux linkage calculation method. The variable flux machines are designed with small air-gap lengths to reduce the magnet thickness and the magnetization current. Due to this reason, saturation and cross-magnetization effects causes changes in the flux produced by one coil, when current in other coil is changed and vice versa. If the cross-magnetization effects are neglected, accurate control of the magnet flux would require a slower current controller. This would need a longer duration pulse to change the magnetization level. The longer the pulse duration, the more severe is the torque ripple. For high-performance drives, consideration of cross-magnetization effects is required. Therefore, this thesis proposes a vector controlled technique to evaluate the cross-magnetization effects in variable flux machines. The proposed technique is able to measure the self and cross-coupled inductances at any magnetization level using an existing drive. The dq model of variable flux machine is then modified to account for the cross-magnetization effects. The cross-coupled inductances are used to evaluate the static torque-angle characteristics of the machine. Two methods using the vector control technique are presented to experimentally measure the static torque-angle characteristics. The benefit of using a vector control drive is that the effects of heating and unequal phase resistances are taken care automatically. The measured torque-angle characteristics are compared with the calculated and finite element method simulation ones. Finally, the same vector control technique is used to evaluate the torque ripple performance of the VFM. This technique is not only useful in evaluating the designed machine, but it is also useful to evaluate design software