PAPR Reduction and Sidelobe Suppression in Cognitive OFDM - A Survey

Cognitive radio (CR) is one of the key technology providing a new way to enhance the utilization of available spectrum effectively. The multicarrier modulation (MCM) technique which is widely used is Orthogonal Frequency Division Multiplexing (OFDM) system, is an excellent choice for high data rate application. The main two limitations of this technology is the high peak-to-average power ratio (PAPR) of transmission signal and large spectrum sidelobe. This article describes some of the important PAPR reduction techniques and sidelobe suppression techniques

PAPR Reduction and Sidelobe Suppression in Cognitive OFDM - A Survey

Cognitive radio (CR) is one of the key technology providing a new way to enhance the utilization of available spectrum effectively. The multicarrier modulation (MCM) technique which is widely used is Orthogonal Frequency Division Multiplexing (OFDM) system, is an excellent choice for high data rate application. The main two limitations of this technology is the high peak-to-average power ratio (PAPR) of transmission signal and large spectrum sidelobe. This article describes some of the important PAPR reduction techniques and sidelobe suppression techniques

PAPR Reduction Method based on In-phase/Quadrature Data Symbol Components in MIMO-OFDM Systems

To overcome unpredictable spikes in the peak-toaverage power ratio (PAPR) in the presence of an orthogonal frequency-division multiplexing (OFDM) for multi-input-multioutput (MIMO) systems, implementation of a new SLM scheme is presented in this paper, which is extended from our previous study of IQ-SLM in SISO-OFDM system. In each transmit antenna, both real and imaginary parts of the base-band data symbol were modified independently using a corresponding phase element within a commonly generated phase vector, instead of modifying the complex data symbol as a single component. After applying an inverse fast Fourier transform (IFFT) for the real, imaginary, and original base-band vectors, the minimum PAPR component was observed. Therefore, the phase vector that introduced the minimal PAPR was considered to convert the original data block for transmission. This technique is called the In-phase/Quadrature-SLM (IQ-SLM) scheme. In this proposal, only U phase vectors were generated to treat all Nt data blocks, simultaneously, unlike the conventional MIMO-SLM techniques which generate UNt candidate phase blocks. The thing which, in turn, can be considered as a further computational complexity reduction, specifically in data-phase conversion stages. As a result, in terms of the complementary cumulative distribution function of PAPR performance(CCDF-PAPR), the proposal achieved a greater decibel reduction than conventional SLM methods such as dSLM, oSLM, and sSLM, at different subcarrier lengths N, candidate phase vectors U, transmit antennas Nt. Also, it shows a comparable BER performances over the dSLM scheme referencing to the theoretical curves, in the case where Nt ≤ Nr for both zero-forcing (ZF) and ZF with vertical Bell laboratories layered space-time (V-BLAST) detector

Review of Recent Trends

This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe

Digital signal processing techniques for peak-to-average power ratio mitigation in MIMO–OFDM systems

The focus of this thesis is to mitigate the very large peak-to-average transmit power ratios (PAPRs) inherent to conventional orthogonal frequency division multiplexing (OFDM) systems, particularly in the context of transmission over multi-input multi-output (MIMO) wireless broadband channels. This problem is important as a large PAPR generally needs an expensive radio frequency (RF) power amplifier at the transmitter due to the requirement for linear operation over a wide amplitude range and such a cost would be compounded when multiple transmit antennas are used. Advanced signal processing techniques which can reduce PAPR whilst retain the integrity of digital transmission therefore have considerable potential for application in emergent MIMO–OFDM wireless systems and form the technical contributions of this study. [Continues.

Design and Performance Analysis of the Dynamic Reduction of Intrinsic Interference Suppression and BER using QAM-based FBMC for MU-MIMO Communications

The present research work is focused on the study of co-channel interface with its minimization techniques without influencing its performance, in turn, which is desired to achieve the minimized complexity of Quadrature Amplitude Modulation (QAM)-based Filter Bank Multi-Carrier (FBMC) to minimize the interference and increase the spectral features with consideration of intrinsic features extractions for the ML (Maximum Likelihood) synthesis systems. The valid measures are given various concerns under consideration, to start with the consideration of the evaluation of the Cyclic Prefix Orthogonal Frequency Division Multiplexing (CP-OFD performance metrics along with the FBMC/QAM in signal transmission in a dedicated fading channel for the evaluation of the modulation order and BER as a required trade-off for quality assessments. From the results, it can be noted that the proposed FBMC QAM has performed better when compared with conventional FBMC systems. The present research also includes considering and calculating the efficiency of nonlinear channels with the Multi-User Multiple Input Multiple Output (MU-MIMO) and FBMC/QAM techniques. In continuation, the obtained results are dominating significantly to access the possible solution to meet the efficiency of the proposed system. In the next part of the research, it is considered with implementation of the sub-detector during the downlink of the system with the technique of threshold-driven strategy for better accuracy and minimization of the complexity in terms of ML detection in terms of order of its modulation. The calculations of the proposed technique with better BER are done on the recent MATLAB platform with its simulation demonstration for its detailed observation

Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System

Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas. In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO). In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques. In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes. Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal