Architecture, design, and modeling of the OPSnet asynchronous optical packet switching node

An all-optical packet-switched network supporting multiple services represents a long-term goal for network operators and service providers alike. The EPSRC-funded OPSnet project partnership addresses this issue from device through to network architecture perspectives with the key objective of the design, development, and demonstration of a fully operational asynchronous optical packet switch (OPS) suitable for 100 Gb/s dense-wavelength-division multiplexing (DWDM) operation. The OPS is built around a novel buffer and control architecture that has been shown to be highly flexible and to offer the promise of fair and consistent packet delivery at high load conditions with full support for quality of service (QoS) based on differentiated services over generalized multiprotocol label switching

Benchmarking and viability assessment of optical packet switching for metro networks

Optical packet switching (OPS) has been proposed as a strong candidate for future metro networks. This paper assesses the viability of an OPS-based ring architecture as proposed within the research project DAVID (Data And Voice Integration on DWDM), funded by the European Commission through the Information Society Technologies (IST) framework. Its feasibility is discussed from a physical-layer point of view, and its limitations in size are explored. Through dimensioning studies, we show that the proposed OPS architecture is competitive with respect to alternative metropolitan area network (MAN) approaches, including synchronous digital hierarchy, resilient packet rings (RPR), and star-based Ethernet. Finally, the proposed OPS architectures are discussed from a logical performance point of view, and a high-quality scheduling algorithm to control the packet-switching operations in the rings is explained

Shared-per-wavelength asynchronous optical packet switching: A comparative analysis

Cataloged from PDF version of article.This paper compares four different architectures for sharing wavelength converters in asynchronous optical packet switches with variable-length packets. The first two architectures are the well-known shared-per-node (SPN) and shared-per-link (SPL) architectures, while the other two are the shared-per-input-wavelength (SPIW) architecture, recently proposed as an optical switch architecture in synchronous context only, which is extended here to the asynchronous scenario, and an original scheme called shared-per-output-wavelength (SPOW) architecture that we propose in the current article. We introduce novel analytical models to evaluate packet loss probabilities for SPIW and SPOW architectures in asynchronous context based on Markov chains and fixed-point iterations for the particular scenario of Poisson input traffic and exponentially distributed packet lengths. The models also account for unbalanced traffic whose impact is thoroughly studied. These models are validated by comparison with simulations which demonstrate that they are remarkably accurate. In terms of performance, the SPOW scheme provides blocking performance very close to the SPN scheme while maintaining almost the same complexity of the space switch, and employing less expensive wavelength converters. On the other hand, the SPIW scheme allows less complexity in terms of number of optical gates required, while it substantially outperforms the widely accepted SPL scheme. The authors therefore believe that the SPIW and SPOW schemes are promising alternatives to the conventional SPN and SPL schemes for the implementation of next-generation optical packet switching systems. 2010 Elsevier B.V. All rights reserved

Wavelength conversion in optical packet switching

A detailed traffic analysis of optical packet switch design is performed. Special consideration is given to the complexity of the optical buffering and the overall switch block structure is considered in general. Wavelength converters are shown to improve the traffic performance of the switch blocks for both random and bursty traffic. Furthermore, the traffic performance of switch blocks with add--drop sports has been assessed in a Shufflenetwork showing the advantage of having converters at the inlets. Finally, the aspect of synchronization is discussed through a proposal to operate the packet switch block asynchronously, i.e., without packet alignment at the input

Performance issues in optical burst/packet switching

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-01524-3_8This chapter summarises the activities on optical packet switching (OPS) and optical burst switching (OBS) carried out by the COST 291 partners in the last 4 years. It consists of an introduction, five sections with contributions on five different specific topics, and a final section dedicated to the conclusions. Each section contains an introductive state-of-the-art description of the specific topic and at least one contribution on that topic. The conclusions give some points on the current situation of the OPS/OBS paradigms

Traffic shapping trends in optical packet/burst switching networks

This paper surveys a set of relevant techniques proposed for traffic shaping in backbone OBS/OPS networks. The work is intended to fuel the near future research in the topic the authors will conduct within BONE project. Keywords: traffic shaping, traffic conditioning, OPS, OBS.This research has been supported by the BONE-project ("Building the Future Optical Network in Europe”), a Network of Excellence funded by the European Commission through the 7th ICT-Framework Program, the support of MEC project TEC2007-67966-01/TCM CON-PARTE-1, and it is also developed in the framework of "Programa de Ayudas a Grupos de Excelencia de la Región de Murcia, de la Fundación Séneca, Agencia de Ciencia y Tecnología de la RM (Plan Regional de Ciencia y Tecnología 2007/2010)