A New Phase Current Profiling with FLC f or Torque Optimization of 12/8 SRM

The switched reluctance machine against its several merits such as simplicity, robustness, less cost manufacturing and large speed still suffers from its undesirable torque ripple and acoustic noise. Compared to different candidates of hybrid and electric vehicle engine, the frequency of use of SRM in traction drives is improved with the different optimizing torque oscillation solutions. Most of studies used the generic or specific model of switched reluctance machine in the Simulink library (6/4,8/6 and 10/8). Despite, a new non linear model simply implemented in Simulink tool usinga static finite element analysis a previous study is used in this work. Hence, a 12/8 non linear SRM drive system is simulated using MATLAB toolbox tested with an intelligent controller (FLC) in order to minimize the torque ripple of an oriented starter –alternator application of a hybrid vehicle

Design and Analysis of Long-Stroke Planar Switched Reluctance Motor for Positioning Applications

This paper presents the design, control, and experimental performance evaluation of a long-stroke planar switched reluctance motor (PSRM) for positioning applications. Based on comprehensive consideration of the electromagnetic and mechanical characteristics of the PSRM, a motor design is first developed to reduce the force ripple and deformation. A control scheme with LuGre friction compensation is then proposed to improve the positioning accuracy of the PSRM. Furthermore, this control scheme is proven to ensure the stable motion of the PSRM system. Additionally, the response speed and steady-state error of the PSRM system with this control scheme are theoretically analyzed. Finally, the experimental results are presented and analyzed. The effectiveness of the precision long-stroke motion of the PSRM and its promise for use in precision positioning applications are verified experimentally

Two-phase linear hybrid reluctance actuator with low detent force

In this paper, a novel two-phase linear hybrid reluctance actuator with the double-sided segmented stator, made of laminated U cores, and an interior mover with permanent magnets is proposed. The permanent magnets are disposed of in a way that increases the thrust force of a double-sided linear switched reluctance actuator of the same size. To achieve this objective, each phase of the actuator is powered by a single H-bridge inverter. To reduce the detent force, the upper and the lower stator were shifted. Finite element analysis was used to demonstrate that the proposed actuator has a high force density with low detent force. In addition, a comparative study between the proposed linear hybrid reluctance actuator, linear switched reluctance, and linear permanent magnet actuators of the same size was performed. Finally, experimental tests carried out in a prototype confirmed the goals of the proposed actuator.Peer ReviewedPostprint (published version

Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

Design of a Switched Reluctance Motor Controller Applied to Electric Vehicles Traction.

Switched reluctance motors (SRM) are a suitable and cheaper alternative for current electric vehicle (EV) powertrain topologies due to low weight, high torque/size ratio and simple construction, without permanent magnets and a minimum amount of copper. The main setback that these motors encounter is the high torque ripple, mainly due to the highly nonlinear torque generation mechanism. Torque ripple leads to mechanical vibrations that require unnecessary wear in the mechanical powertrain. In conventional torque sharing function (TSF) control, the torque produced by the machine cannot follow the expected torque for an extended speed range, mostly due to the imposed demagnetization of the outgoing phase at high speeds, resulting in poor performance and causing a high torque ripple. The main goal of this work is to design and validate a new SRM control method suitable for EV propulsion. The proposed controller applies a feedback loop that improves the weakness of the conventional methods, keeping a fast dynamic response. The simulation results show that torque ripple can effectively be reduced for a high torque and speed range. The researched algorithm is developed using Matlab/Simulink, basing the validation on experiments with a 60kW SRM, 12/8 poles prototype designed using finite element methods (FEM)

Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine

Optimal performance of the electric machine/drive system is mandatory to improve the energy consumption and reliability. To achieve this goal, mathematical models of the electric machine/drive system are necessary. Hence, this motivated the editors to instigate the Special Issue “Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine”, aiming to collect novel publications that push the state-of-the art towards optimal performance for the electric machine/drive system. Seventeen papers have been published in this Special Issue. The published papers focus on several aspects of the electric machine/drive system with respect to the mathematical modelling. Novel optimization methods, control approaches, and comparative analysis for electric drive system based on various electric machines were discussed in the published papers

Fuzzy Logic Control of Switched Reluctance Motor Drives

In this chapter, the electromechanical behavior of switched reluctance motor (SRM) is first modeled by analyzing the related nonlinear differential equations. In the model, the estimation of rotor speed is also considered. After modeling, the effects of torque ripple, radial force, and acoustic noise are investigated. As we know, torque ripple and acoustic noise are two of the main disadvantages of a switched reluctance motor. Thus, a fuzzy logic current compensator is proposed both for reducing the peak of radial force and for decreasing acoustic noise effects. In the parts that torque reduces, the fuzzy logic current compensator injects additional current for each phase current to overcome the torque ripple. Also, the fuzzy logic current compensator reduces speed estimation error. The speed estimation is carried out using a hybrid sliding mode observer which estimates the rotor position and speed for a wide speed range. These new approaches have been simulated using MATLAB/SIMULINK for a nonlinear model of switched reluctance motor. The simulation results indicate that proposed methods decrease the maximum radial force and the torque ripple while the maximum torque is preserved. Also, these results show that proposed methods will estimate the rotor position and speed with high precision for all speeds from near zero speeds up to rated speed. These procedures have the advantages of simple implementation on the every switched reluctance motor drive without extra hardware, low cost, high reliability, low vibration, and excellent performance at long term

Model predictive current control of switched reluctance motor with inductance auto-calibration

The thesis is composed of three papers, which investigate the application of Model Predictive Controller (MPC) for current control of Switched Reluctance Motor (SRM). Since the conventional hysteresis current control method is not suitable for high power SRM drive system with low inductance and limited switching frequency, MPC is a promising alternative approach for this application. The proposed MPC can cope with the measurement noise as well as uncertainties within the machine inductance profile. In the first paper, a MPC current control method for Double-Stator Switched Reluctance Motor (DSSRM) drives is presented. A direct adaptive estimator is incorporated to follow the inductance variations in a DSSRM. In the second paper, the Linear Quadratic (LQ) form and dynamic programming recursion for MPC are analyzed, afterwards the unconstrained MPC solution for stochastic SRM model is derived. The Kalman filter is employed to reduce the variance of measurement noises. Based on Recursive Linear-Square (RLS) estimation, the inductance profile is calibrated dynamically. In the third paper, a simplified recursive MPC current control algorithm for SRM is applied for embedded implementation. A novel auto-calibration method for inductance surface estimation is developed to improve current control performance of SRM drive in statistic terms. --Abstract, page iv

Comparative evaluation for an improved direct instantaneous torque control strategy of switched reluctance motor drives for electric vehicles

Due to the expected increase in the electric vehicles (EVs) sales and hence the increase of the price of rare-earth permanent magnets, the switched reluctance motors (SRMs) are gaining increasing research interest currently and in the future. The SRMs offer numerous advantages regarding their structure and converter topologies. However, they suffer from the high torque ripple and complex control algorithms. This paper presents an improved direct instantaneous torque control (DITC) strategy of SRMs for EVs. The improved DITC can fulfill the vehicle requirements. It involves a simple online torque estimator and a torque error compensator. The turn-on angle is defined analytically to achieve wide speed operation and maximum torque per ampere (MTPA) production. Moreover, the turn-off angles are optimized for minimum torque ripples and the highest efficiency. In addition, this paper provides a detailed comparison between the proposed DITC and the most applicable torque control techniques of SRMs for EVs, including indirect instantaneous torque control (IITC), using torque sharing function (TSF) strategy and average torque control (ATC). The results show the superior performance of the proposed DITC because it has the lowest torque ripples, the highest torque tor current ratio, and the best efficiency over the low and medium speed ranges. Moreover, the comparison shows the advantages of each control technique over the range of speed control. It provides a very clear overview to develop a universal control technique of SRM for EVs by merging two or more control techniques