Software Defined Radio Design for OFDM Based Spectrum Exchange Information Using Arduino UNO and X-Bee

A cost expenditure of software defined radio software has limiting the development of cognitive radio in third countries. Moreover, a complexity of signal processing library in a SDR platform has contributed to the hard implementation in real applications. In this works, the development of SDR platform with low cost expenditure is proposed. Arduino UNO and X Bee uses for the OFDM based spectrum exchange information. In a case of spectrum sensing scenario, the objective of the local spectrum sensing is to detect the PU’s signal detection. The performance of SN ability to sense the PU’s signal is crucial. It was shown that from the previous works as the detected power is quantized into information bit is simulated.  In  order  to  implemented  the  spectrum exchange  information during  sensing,  Arduino  UNO  and  X  Bee  is implemented to sense the presence of PU activity channels of wifi terminals based on the energy of the signals. The detected power (RSSI) of wifi terminals is exchanged into an OFDM subcarrier tone signal such as orthogonal sub-channel that being equally divided from the licensed band.   The results shows that using proposed software defined radio (SDR) based on Arduino and X Bee, the cognitive radio spectrum sensing is applied. The received power from the PU’s channels such as wifi networks can be detected as well. The system could received and exchanged into OFDM-based subcarrier information bits

Spatial Diversity Impact in Mobile Quantisation Mapping for Cognitive Radio Networks

Mobile environment especially spatial diversity in spectrum exchange information in cognitive radio networks is an interesting topic for further investigation. Most of the cognitive radio researchers does not consider the spatial diversity of sensing nodes. However, the mobility of the SNs within PU’s coverage area is heavily influencing the detection performance on local observation of energy signals. The movement of the SNs creates spatial diversity in the observation of the PU’s signal. Due to the movement, spatial distance, velocity, Doppler Effect and geo-location information, the signals condition would fluctuate during the sensing process. Spatial diversity also reduces the average received signal strength and must be compensated by detection signal method which appropriate with the signal conditions.  Therefore, it is need to find a comprehensive solution to overcome the effects of spatial diversity. Moreover, this research could give a clearly analysis in spectrum exchange information regarding detection performance for cognitive radio networks. Finally, the cooperation overhead due to spatial diversity effects in master node station could reduce and increased the detection performance of PU’s spectrum hole channels

Cooperative spectrum sensing using adaptive quantization mapping for mobile cognitive radio networks

Sparsity in spectrum is the result of spectrum underutilization. Cognitive radio (CR) technology has been proposed to address inefficiency of spectrum utilisation through dynamic spectrum access technique. CR in general allows secondary node (SN) users to access the licensed or primary users’ (PU) band without disrupting their activities. In CR cooperative spectrum sensing (CSS), a group of SNs share their spectrum sensing information to provide a better picture of the spectrum usage over the area where the SNs are located. In centralised CCS approach, all the SNs report their sensing information to a master node (MN) through a control reporting channel before the MN decides the spectrum bands that can be used by the SNs. To reduce unnecessary reporting information by the cooperating nodes, orthogonal frequency division multiplexing (OFDM) Subcarrier Mapping (SCM) spectrum exchange information was proposed. In this technique, the detection power level from each secondary SN user is quantized and mapped into a single OFDM subcarrier number before delivering it to the MN. Most researches in cooperative spectrum sensing often stated that the SNs are absolutely in stationary condition. So far, the mobility effect on OFDM based SCM spectrum exchange information has not been addressed before. In this thesis, the benchmarking of SCM in mobility environment is carried out. The results showed that during mobility, the performance of OFDM-based SCM spectrum exchange information degraded significantly. To alleviate the degradation, OFDM-based spectrum exchange information using adaptive quantization is proposed, which is known as Dynamic Subcarrier Mapping (DSM). The method is proposed to adapt to changes in detected power level during mobility. This new nonuniform subcarrier mapping considers the range of received power, threshold level and dynamic subcarrier width. The range of received power is first compressed or expanded depending on the intensity of the received power against a pre-determined threshold level before the OFDM subcarrier number is computed. The results showed that OFDM-based DSM spectrum exchange information is able to enhance the probability of detection for cooperative sensing by up to 43% and reduce false alarm by up to 28%. The DSM spectrum exchange information method has the potential to improve cooperative spectrum sensing for future CR mobile wireless networks

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.Comment: 46 pages, 22 fig

The University Defence Research Collaboration In Signal Processing

This chapter describes the development of algorithms for automatic detection of anomalies from multi-dimensional, undersampled and incomplete datasets. The challenge in this work is to identify and classify behaviours as normal or abnormal, safe or threatening, from an irregular and often heterogeneous sensor network. Many defence and civilian applications can be modelled as complex networks of interconnected nodes with unknown or uncertain spatio-temporal relations. The behavior of such heterogeneous networks can exhibit dynamic properties, reflecting evolution in both network structure (new nodes appearing and existing nodes disappearing), as well as inter-node relations. The UDRC work has addressed not only the detection of anomalies, but also the identification of their nature and their statistical characteristics. Normal patterns and changes in behavior have been incorporated to provide an acceptable balance between true positive rate, false positive rate, performance and computational cost. Data quality measures have been used to ensure the models of normality are not corrupted by unreliable and ambiguous data. The context for the activity of each node in complex networks offers an even more efficient anomaly detection mechanism. This has allowed the development of efficient approaches which not only detect anomalies but which also go on to classify their behaviour

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

CELLULAR-ENABLED MACHINE TYPE COMMUNICATIONS: RECENT TECHNOLOGIES AND COGNITIVE RADIO APPROACHES

The scarcity of bandwidth has always been the main obstacle for providing reliable high data-rate wireless links, which are in great demand to accommodate nowadays and immediate future wireless applications. In addition, recent reports have showed inefficient usage and under-utilization of the available bandwidth. Cognitive radio (CR) has recently emerged as a promising solution to enhance the spectrum utilization, where it offers the ability for unlicensed users to access the licensed spectrum opportunistically. By allowing opportunistic spectrum access which is the main concept for the interweave network model, the overall spectrum utilization can be improved. This requires cognitive radio networks (CRNs) to consider the spectrum sensing and monitoring as an essential enabling process for the interweave network model. Machine-to-machine (M2M) communication, which is the basic enabler for the Internet-of-Things (IoT), has emerged to be a key element in future networks. Machines are expected to communicate with each other exchanging information and data without human intervention. The ultimate objective of M2M communications is to construct comprehensive connections among all machines distributed over an extensive coverage area. Due to the radical change in the number of users, the network has to carefully utilize the available resources in order to maintain reasonable quality-of-service (QoS). Generally, one of the most important resources in wireless communications is the frequency spectrum. To utilize the frequency spectrum in IoT environment, it can be argued that cognitive radio concept is a possible solution from the cost and performance perspectives. Thus, supporting numerous number of machines is possible by employing dual-mode base stations which can apply cognitive radio concept in addition to the legacy licensed frequency assignment. In this thesis, a detailed review of the state of the art related to the application of spectrum sensing in CR communications is considered. We present the latest advances related to the implementation of the legacy spectrum sensing approaches. We also address the implementation challenges for cognitive radios in the direction of spectrum sensing and monitoring. We propose a novel algorithm to solve the reduced throughput issue due to the scheduled spectrum sensing and monitoring. Further, two new architectures are considered to significantly reduce the power consumption required by the CR to enable wideband sensing. Both systems rely on the 1-bit quantization at the receiver side. The system performance is analytically investigated and simulated. Also, complexity and power consumption are investigated and studied. Furthermore, we address the challenges that are expected from the next generation M2M network as an integral part of the future IoT. This mainly includes the design of low-power low-cost machine with reduced bandwidth. The trade-off between cost, feasibility, and performance are also discussed. Because of the relaxation of the frequency and spatial diversities, in addition, to enabling the extended coverage mode, initial synchronization and cell search have new challenges for cellular-enabled M2M systems. We study conventional solutions with their pros and cons including timing acquisition, cell detection, and frequency offset estimation algorithms. We provide a technique to enhance the performance in the presence of the harsh detection environment for LTE-based machines. Furthermore, we present a frequency tracking algorithm for cellular M2M systems that utilizes the new repetitive feature of the broadcast channel symbols in next generation Long Term Evolution (LTE) systems. In the direction of narrowband IoT support, we propose a cell search and initial synchronization algorithm that utilizes the new set of narrowband synchronization signals. The proposed algorithms have been simulated at very low signal to noise ratios and in different fading environments