High-speed completion detection for current sensing on-chip interconnects

A novel completion detection technique for delay insensitive current sensing on-chip interconnects is presented. The scheme is based on sensing currents on the data wires and comparing the sum of these currents to an appropriately set reference. The goal is to solve the performance bottleneck caused by conventional voltage-mode detection methods. With the channel width of 64 bits, the proposed method is 4.65 times faster and takes 36% less area than the voltage-mode scheme. Furthermore, its speed does not degrade when increasing the channel bit width. It is implemented in a 65 nm CMOS technology

High-performance long NoC link using delay-insensitive current-mode signaling

High-performance long-range NoC link enables efficient implementation of network-on-chip topologies which inherently require high-performance long-distance point-to-point communication such as torus and fat-tree structures. In addition, the performance of other topologies, such as mesh, can be improved by using high-performance link between few selected remote nodes.We presented novel implementation of high-performance long-range NoC link based onmultilevel current-mode signaling and delayinsensitive two-phase 1-of-4 encoding. Current-mode signaling reduces the communication latency of long wires significantlycompared to voltage-mode signaling, making it possible to achieve high throughput without pipelining and/or using repeaters. The performance of the proposed multilevel current-mode interconnect is analyzed and compared with two reference voltage mode interconnects. These two reference interconnects are designed using two-phase 1-of-4 encoded voltage-mode signaling, one with pipeline stages and the other using optimal repeater insertion. The proposed multilevel current-mode interconnect achieves higher throughput and lower latency than the two reference interconnects. Its throughput at 8mm wire length is 1.222GWord/swhich is 1.58 and 1.89 times higher than the pipelined and optimal repeater insertion interconnects, respectively. Furthermore, its power consumption is less than the optimal repeater insertion voltage-mode interconnect, at 10mm wire length its power consumption is 0.75mW while the reference repeater insertion interconnect is 1.066 mW. The effect of crosstalk is analyzed using four-bit parallel data transfer with the best-case and worst-case switching patterns and a transmission line model which has both capacitive coupling and inductive coupling.</p

Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects

Siirretty Doriast

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Cutting Edge Nanotechnology

The main purpose of this book is to describe important issues in various types of devices ranging from conventional transistors (opening chapters of the book) to molecular electronic devices whose fabrication and operation is discussed in the last few chapters of the book. As such, this book can serve as a guide for identifications of important areas of research in micro, nano and molecular electronics. We deeply acknowledge valuable contributions that each of the authors made in writing these excellent chapters

The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2

Algorithms and VLSI architectures for parametric additive synthesis

A parametric additive synthesis approach to sound synthesis is advantageous as it can model sounds in a large scale manner, unlike the classical sinusoidal additive based synthesis paradigms. It is known that a large body of naturally occurring sounds are resonant in character and thus fit the concept well. This thesis is concerned with the computational optimisation of a super class of form ant synthesis which extends the sinusoidal parameters with a spread parameter known as band width. Here a modified formant algorithm is introduced which can be traced back to work done at IRCAM, Paris. When impulse driven, a filter based approach to modelling a formant limits the computational work-load. It is assumed that the filter's coefficients are fixed at initialisation, thus avoiding interpolation which can cause the filter to become chaotic. A filter which is more complex than a second order section is required. Temporal resolution of an impulse generator is achieved by using a two stage polyphase decimator which drives many filterbanks. Each filterbank describes one formant and is composed of sub-elements which allow variation of the formant’s parameters. A resource manager is discussed to overcome the possibility of all sub- banks operating in unison. All filterbanks for one voice are connected in series to the impulse generator and their outputs are summed and scaled accordingly. An explorative study of number systems for DSP algorithms and their architectures is investigated. I invented a new theoretical mechanism for multi-level logic based DSP. Its aims are to reduce the number of transistors and to increase their functionality. A review of synthesis algorithms and VLSI architectures are discussed in a case study between a filter based bit-serial and a CORDIC based sinusoidal generator. They are both of similar size, but the latter is always guaranteed to be stable

Palmo : a novel pulsed based signal processing technique for programmable mixed-signal VLSI

In this thesis a new signal processing technique is presented. This technique exploits the use of pulses as the signalling mechanism. This Palmo 1 signalling method applied to signal processing is novel, combining the advantages of both digital and analogue techniques. Pulsed signals are robust, inherently low-power, easily regenerated, and easily distributed across and between chips. The Palmo cells used to perform analogue operations on the pulsed signals are compact, fast, simple and programmable