3,083 research outputs found
Information Aided Navigation: A Review
The performance of inertial navigation systems is largely dependent on the
stable flow of external measurements and information to guarantee continuous
filter updates and bind the inertial solution drift. Platforms in different
operational environments may be prevented at some point from receiving external
measurements, thus exposing their navigation solution to drift. Over the years,
a wide variety of works have been proposed to overcome this shortcoming, by
exploiting knowledge of the system current conditions and turning it into an
applicable source of information to update the navigation filter. This paper
aims to provide an extensive survey of information aided navigation, broadly
classified into direct, indirect, and model aiding. Each approach is described
by the notable works that implemented its concept, use cases, relevant state
updates, and their corresponding measurement models. By matching the
appropriate constraint to a given scenario, one will be able to improve the
navigation solution accuracy, compensate for the lost information, and uncover
certain internal states, that would otherwise remain unobservable.Comment: 8 figures, 3 table
A Systematic Survey of Control Techniques and Applications: From Autonomous Vehicles to Connected and Automated Vehicles
Vehicle control is one of the most critical challenges in autonomous vehicles
(AVs) and connected and automated vehicles (CAVs), and it is paramount in
vehicle safety, passenger comfort, transportation efficiency, and energy
saving. This survey attempts to provide a comprehensive and thorough overview
of the current state of vehicle control technology, focusing on the evolution
from vehicle state estimation and trajectory tracking control in AVs at the
microscopic level to collaborative control in CAVs at the macroscopic level.
First, this review starts with vehicle key state estimation, specifically
vehicle sideslip angle, which is the most pivotal state for vehicle trajectory
control, to discuss representative approaches. Then, we present symbolic
vehicle trajectory tracking control approaches for AVs. On top of that, we
further review the collaborative control frameworks for CAVs and corresponding
applications. Finally, this survey concludes with a discussion of future
research directions and the challenges. This survey aims to provide a
contextualized and in-depth look at state of the art in vehicle control for AVs
and CAVs, identifying critical areas of focus and pointing out the potential
areas for further exploration
DOES: A Deep Learning-based approach to estimate roll and pitch at sea
The use of Attitude and Heading Reference Systems (AHRS) for orientation estimation is now common practice in a wide range of applications, e.g., robotics and human motion tracking, aerial vehicles and aerospace, gaming and virtual reality, indoor pedestrian navigation and maritime navigation. The integration of the high-rate measurements can provide very accurate estimates, but these can suffer from errors accumulation due to the sensors drift over longer time scales. To overcome this issue, inertial sensors are typically combined with additional sensors and techniques. As an example, camera-based solutions have drawn a large attention by the community, thanks to their low-costs and easy hardware setup; moreover, impressive results have been demonstrated in the context of Deep Learning. This work presents the preliminary results obtained by DOES, a supportive Deep Learning method specifically designed for maritime navigation, which aims at improving the roll and pitch estimations obtained by common AHRS. DOES recovers these estimations through the analysis of the frames acquired by a low-cost camera pointing the horizon at sea. The training has been performed on the novel ROPIS dataset, presented in the context of this work, acquired using the FrameWO application developed for the scope. Promising results encourage to test other network backbones and to further expand the dataset, improving the accuracy of the results and the range of applications of the method as a valid support to visual-based odometry techniques
Recommended from our members
Knowledge Discovery and Data Mining for Shared Mobility and Connected and Automated Vehicle Applications
The rapid development of shared mobility and connected and automated vehicles (CAVs) has not only brought new intelligent transportation system (ITS) challenges with the new types of mobility, but also brought a huge opportunity to accelerate the connectivity and informatization of transportation systems, particularly when we consider all the new forms of data that is becoming available. The primary challenge is how to take advantage of the enormous amount of data to discover knowledge, build effective models, and develop impactful applications. With the theoretical and experimental progress being made over the last two decades, data mining and machine learning technologies have become key approaches for parsing data, understanding information, and making informed decisions, especially as the rise of deep learning algorithms bringing new levels of performance to the analysis of large datasets. The combination of data mining and ITS can greatly benefit research and advances in shared mobility and CAVs.This dissertation focuses on knowledge discovery and data mining for shared mobility and CAV applications. When considering big data associated with shared mobility operations and CAV research, data mining techniques can be customized with transportation knowledge to initially parse the data. Then machine learning methods can be used to model the parsed data to elicit hidden knowledge. Finally, the discovered knowledge and extracted information can help in the development of effective shared mobility and CAV applications to achieve the goals of a safer, faster, and more eco-friendly transportation systems.In this dissertation, there are four main sections that are addressed. First, new methodologies are introduced for extracting lane-level road features from rough crowdsourced GPS trajectories via data mining, which is subsequently used as the fundamental information for CAV applications. The proposed method results in decimeter level accuracy, which satisfies the positioning needs for many macroscopic and microscopic shared mobility and CAV applications. Second, macroscopic ride-hailing service big data has been analyzed for demand prediction, vehicle operation, and system efficiency monitoring. The proposed deep learning algorithms increase the ride-hailing demand prediction accuracy to 80% and can help the fleet dispatching system reduce 30% of vacant travel distance. Third, microscopic automated vehicle perception data has been analyzed for a real-time computer vision system that can be used for lane change behavior detection. The proposed deep learning design combines the residual neural network image input with time serious control data and reaches 95% of lane change behavior prediction accuracy. Last but not least, new ride sharing and CAV applications have been simulated in a behavior modeling framework to analyze the impact of mobility and energy consumption, which addresses key barriers by quantifying the transportation system-wide mobility, energy and behavior impacts from new mobility technologies using real-world data
Autonomous Vehicles
This edited volume, Autonomous Vehicles, is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of vehicle autonomy. The book comprises nine chapters authored by various researchers and edited by an expert active in the field of study. All chapters are complete in itself but united under a common research study topic. This publication aims to provide a thorough overview of the latest research efforts by international authors, open new possible research paths for further novel developments, and to inspire the younger generations into pursuing relevant academic studies and professional careers within the autonomous vehicle field
AN INTELLIGENT NAVIGATION SYSTEM FOR AN AUTONOMOUS UNDERWATER VEHICLE
The work in this thesis concerns with the development of a novel multisensor data fusion
(MSDF) technique, which combines synergistically Kalman filtering, fuzzy logic
and genetic algorithm approaches, aimed to enhance the accuracy of an autonomous
underwater vehicle (AUV) navigation system, formed by an integration of global positioning
system and inertial navigation system (GPS/INS).
The Kalman filter has been a popular method for integrating the data produced
by the GPS and INS to provide optimal estimates of AUVs position and attitude. In
this thesis, a sequential use of a linear Kalman filter and extended Kalman filter is
proposed. The former is used to fuse the data from a variety of INS sensors whose
output is used as an input to the later where integration with GPS data takes place.
The use of an adaptation scheme based on fuzzy logic approaches to cope with the
divergence problem caused by the insufficiently known a priori filter statistics is also
explored. The choice of fuzzy membership functions for the adaptation scheme is first
carried out using a heuristic approach. Single objective and multiobjective genetic
algorithm techniques are then used to optimize the parameters of the membership
functions with respect to a certain performance criteria in order to improve the overall
accuracy of the integrated navigation system. Results are presented that show
that the proposed algorithms can provide a significant improvement in the overall
navigation performance of an autonomous underwater vehicle navigation.
The proposed technique is known to be the first method used in relation to AUV
navigation technology and is thus considered as a major contribution thereof.J&S Marine Ltd.,
Qinetiq, Subsea 7 and South West Water PL
Development,Validation, and Integration of AI-Driven Computer Vision System and Digital-twin System for Traffic Safety Dignostics
The use of data and deep learning algorithms in transportation research have become increasingly popular in recent years. Many studies rely on real-world data. Collecting accurate traffic data is crucial for analyzing traffic safety. Still, traditional traffic data collection methods that rely on loop detectors and radar sensors are limited to collect macro-level data, and it may fail to monitor complex driver behaviors like lane changing and interactions between road users. With the development of new technologies like in-vehicle cameras, Unmanned Aerial Vehicle (UAV), and surveillance cameras, vehicle trajectory data can be collected from the recorded videos for more comprehensive and microscopic traffic safety analysis. This research presents the development, validation, and integration of three AI-driven computer vision systems for vehicle trajectory extraction and traffic safety research: 1) A.R.C.I.S, an automated framework for safety diagnosis utilizing multi-object detection and tracking algorithm for UAV videos. 2)N.M.E.D.S., A new framework with the ability to detect and predict the key points of vehicles and provide more precise vehicle occupying locations for traffic safety analysis. 3)D.V.E.D.S applied deep learning models to extract information related to drivers\u27 visual environment from the Google Street View (GSV) images. Based on the drone video collected and processed by A.R.C.I.S at various locations, CitySim: a new drone recorded vehicle trajectory dataset that aim to facilitate safety research was introduced. CitySim has vehicle interaction trajectories extracted from 1140- minutes of video recordings, which provide a large-scale naturalistic vehicle trajectory that covers a variety of locations, including basic freeway segments, freeway weaving segments, expressway segments, signalized intersections, stop-controlled intersections, and unique intersections without sign/signal control. The advantage of CitySim over other datasets is that it contains more critical safety events in quantity and severity and provides supporting scenarios for safety-oriented research. In addition, CitySim provides digital twin features, including the 3D base maps and signal timings, which enables a more comprehensive testing environment for safety research, such as autonomous vehicle safety. Based on these digital twin features provided by CitySim, we proposed a Digital Twin framework for CV and pedestrian in-the-loop simulation, which is based on Carla-Sumo Co-simulation and Cave automatic virtual environment (CAVE). The proposed framework is expected to guide the future Digital Twin research, and the architecture we build can serve as the testbed for further research and development
- …