Data-driven model-based approaches to condition monitoring and improving power output of wind turbines

The development of the wind farm has grown dramatically in worldwide over the past 20 years. In order to satisfy the reliability requirement of the power grid, the wind farm should generate sufficient active power to make the frequency stable. Consequently, many methods have been proposed to achieve optimizing wind farm active power dispatch strategy. In previous research, it assumed that each wind turbine has the same health condition in the wind farm, hence the power dispatch for healthy and sub-healthy wind turbines are treated equally. It will accelerate the sub-healthy wind turbines damage, which may leads to decrease generating efficiency and increases operating cost of the wind farm. Thus, a novel wind farm active power dispatch strategy considering the health condition of wind turbines and wind turbine health condition estimation method are the proposed. A modelbased CM approach for wind turbines based on the extreme learning machine (ELM) algorithm and analytic hierarchy process (AHP) are used to estimate health condition of the wind turbine. Essentially, the aim of the proposed method is to make the healthy wind turbines generate power as much as possible and reduce fatigue loads on the sub-healthy wind turbines. Compared with previous methods, the proposed methods is able to dramatically reduce the fatigue loads on subhealthy wind turbines under the condition of satisfying network operator active power demand and maximize the operation efficiency of those healthy turbines. Subsequently, shunt active power filters (SAPFs) are used to improve power quality of the grid by mitigating harmonics injected from nonlinear loads, which is further to increase the reliability of the wind turbine system

Fault Diagnosis Approach of Main Drive Chain in Wind Turbine Based on Data Fusion

This article belongs to the Special Issue Electrification of Smart Cities.Copyright: © 2021 by the authors. The construction and operation of wind turbines have become an important part of the development of smart cities. However, the fault of the main drive chain often causes the outage of wind turbines, which has a serious impact on the normal operation of wind turbines in smart cities. In order to overcome the shortcomings of the commonly used main drive chain fault diagnosis method that only uses a single data source, a fault feature extraction and fault diagnosis approach based on data source fusion is proposed. By fusing two data sources, the supervisory control and data acquisition (SCADA) real-time monitoring system data and the main drive chain vibration monitoring data, the fault features of the main drive chain are jointly extracted, and an intelligent fault diagnosis model for the main drive chain in wind turbine based on data fusion is established. The diagnosis results of actual cases certify that the fault diagnosis model based on the fusion of two data sources is able to locate faults of the main drive chain in the wind turbine accurately and provide solid technical support for the high-efficient operation and maintenance of wind turbines.China Southern Power Grid (Research Program of Digital Grid Research Institute, Grant YTYZW20010)

Maintenance Management of Wind Turbines

“Maintenance Management of Wind Turbines” considers the main concepts and the state-of-the-art, as well as advances and case studies on this topic. Maintenance is a critical variable in industry in order to reach competitiveness. It is the most important variable, together with operations, in the wind energy industry. Therefore, the correct management of corrective, predictive and preventive politics in any wind turbine is required. The content also considers original research works that focus on content that is complementary to other sub-disciplines, such as economics, finance, marketing, decision and risk analysis, engineering, etc., in the maintenance management of wind turbines. This book focuses on real case studies. These case studies concern topics such as failure detection and diagnosis, fault trees and subdisciplines (e.g., FMECA, FMEA, etc.) Most of them link these topics with financial, schedule, resources, downtimes, etc., in order to increase productivity, profitability, maintainability, reliability, safety, availability, and reduce costs and downtime, etc., in a wind turbine. Advances in mathematics, models, computational techniques, dynamic analysis, etc., are employed in analytics in maintenance management in this book. Finally, the book considers computational techniques, dynamic analysis, probabilistic methods, and mathematical optimization techniques that are expertly blended to support the analysis of multi-criteria decision-making problems with defined constraints and requirements

30th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2017)

Proceedings of COMADEM 201

Wind Power Integration into Power Systems: Stability and Control Aspects

Power network operators are rapidly incorporating wind power generation into their power grids to meet the widely accepted carbon neutrality targets and facilitate the transition from conventional fossil-fuel energy sources to clean and low-carbon renewable energy sources. Complex stability issues, such as frequency, voltage, and oscillatory instability, are frequently reported in the power grids of many countries and regions (e.g., Germany, Denmark, Ireland, and South Australia) due to the substantially increased wind power generation. Control techniques, such as virtual/emulated inertia and damping controls, could be developed to address these stability issues, and additional devices, such as energy storage systems, can also be deployed to mitigate the adverse impact of high wind power generation on various system stability problems. Moreover, other wind power integration aspects, such as capacity planning and the short- and long-term forecasting of wind power generation, also require careful attention to ensure grid security and reliability. This book includes fourteen novel research articles published in this Energies Special Issue on Wind Power Integration into Power Systems: Stability and Control Aspects, with topics ranging from stability and control to system capacity planning and forecasting

Coordinated control of wind power and energy storage

Nowadays, wind power has become one of the fastest growing sources of electricity in the world. Due to the inherent variability and uncertainty, wind power integration into the grid brings challenges for power systems, particularly when the wind power penetration level is high. The challenges exist in many aspects, such as reliability, power quality and stability. With the rapid development of energy storage technology, the application of Energy Storage System (ESS) is considered as an effective solution to handle the aforementioned challenges. The main objective of this study is to investigate the coordinated control of wind power and ESS. Due to the different technical characteristics, such as power and energy density, ESS can play different roles either in generation-side, grid-side or demand side. This thesis focuses on the following two scenarios:• Scenario 1: As a part of wind farm, the ESS plays a generation-side role which aims to improve the grid-friendliness of the wind farm. • Scenario 2: As a part of microgrid, the ESS is used to efficiently accommodate the wind power fluctuation.Around the main objective, the relevant research fields including the wind turbine modeling and control, wind farm modeling and control, planning of ESS are also studied in this thesis. The implementation and validation of the International Electrotechnical Commission (IEC) generic Type 1A are presented in this thesis. It is shown that the implemented IEC generic Type 1 models in PowerFactory (PF) can represent the relevant dynamics during normal operation and fault conditions. The model against measurements validation was carried out to verify the implemented wind turbine generator model. For the wind turbine control strategy, the L1 adaptive controller for Maximum Power Point Tracking (MPPT) of a small variable speed Wind Energy Conversion System (WECS) is developed. It showed good tracking performance towards the optimum Tip Speed Ratio (TSR) and robustness with fast adaptation to uncertainties and disturbances. For the wind farm control, the optimal active power control based on Distributed Model Predictive Control (D-MPC) is proposed. With the developed D-MPC, most of computation tasks are distributed to the local D-MPCs equipped at each actuator (wind turbine or ESS). This control structure is independent from the scale of the wind farm. The algorithms for optimal siting and sizing of ESS in the grid with a significant penetration of wind power are studied and implemented in a test network. For the point of view the grid operator, the optimal sizing and siting of ESS are analyzed, which enhance the controllability and derive the global benefit of the whole grid

Establishment of a novel predictive reliability assessment strategy for ship machinery

There is no doubt that recent years, maritime industry is moving forward to novel and sophisticated inspection and maintenance practices. Nowadays maintenance is encountered as an operational method, which can be employed both as a profit generating process and a cost reduction budget centre through an enhanced Operation and Maintenance (O&M) strategy. In the first place, a flexible framework to be applicable on complex system level of machinery can be introduced towards ship maintenance scheduling of systems, subsystems and components.;This holistic inspection and maintenance notion should be implemented by integrating different strategies, methodologies, technologies and tools, suitably selected by fulfilling the requirements of the selected ship systems. In this thesis, an innovative maintenance strategy for ship machinery is proposed, namely the Probabilistic Machinery Reliability Assessment (PMRA) strategy focusing towards the reliability and safety enhancement of main systems, subsystems and maintainable units and components.;In this respect, the combination of a data mining method (k-means), the manufacturer safety aspects, the dynamic state modelling (Markov Chains), the probabilistic predictive reliability assessment (Bayesian Belief Networks) and the qualitative decision making (Failure Modes and Effects Analysis) is employed encompassing the benefits of qualitative and quantitative reliability assessment. PMRA has been clearly demonstrated in two case studies applied on offshore platform oil and gas and selected ship machinery.;The results are used to identify the most unreliability systems, subsystems and components, while advising suitable practical inspection and maintenance activities. The proposed PMRA strategy is also tested in a flexible sensitivity analysis scheme.There is no doubt that recent years, maritime industry is moving forward to novel and sophisticated inspection and maintenance practices. Nowadays maintenance is encountered as an operational method, which can be employed both as a profit generating process and a cost reduction budget centre through an enhanced Operation and Maintenance (O&M) strategy. In the first place, a flexible framework to be applicable on complex system level of machinery can be introduced towards ship maintenance scheduling of systems, subsystems and components.;This holistic inspection and maintenance notion should be implemented by integrating different strategies, methodologies, technologies and tools, suitably selected by fulfilling the requirements of the selected ship systems. In this thesis, an innovative maintenance strategy for ship machinery is proposed, namely the Probabilistic Machinery Reliability Assessment (PMRA) strategy focusing towards the reliability and safety enhancement of main systems, subsystems and maintainable units and components.;In this respect, the combination of a data mining method (k-means), the manufacturer safety aspects, the dynamic state modelling (Markov Chains), the probabilistic predictive reliability assessment (Bayesian Belief Networks) and the qualitative decision making (Failure Modes and Effects Analysis) is employed encompassing the benefits of qualitative and quantitative reliability assessment. PMRA has been clearly demonstrated in two case studies applied on offshore platform oil and gas and selected ship machinery.;The results are used to identify the most unreliability systems, subsystems and components, while advising suitable practical inspection and maintenance activities. The proposed PMRA strategy is also tested in a flexible sensitivity analysis scheme

Alternative Sources of Energy Modeling, Automation, Optimal Planning and Operation

An economic development model analyzes the adoption of alternative strategy capable of leveraging the economy, based essentially on RES. The combination of wind turbine, PV installation with new technology battery energy storage, DSM network and RES forecasting algorithms maximizes RES integration in isolated islands. An innovative model of power system (PS) imbalances is presented, which aims to capture various features of the stochastic behavior of imbalances and to reduce in average reserve requirements and PS risk. Deep learning techniques for medium-term wind speed and solar irradiance forecasting are presented, using for first time a specific cloud index. Scalability-replicability of the FLEXITRANSTORE technology innovations integrates hardware-software solutions in all areas of the transmission system and the wholesale markets, promoting increased RES. A deep learning and GIS approach are combined for the optimal positioning of wave energy converters. An innovative methodology to hybridize battery-based energy storage using supercapacitors for smoother power profile, a new control scheme and battery degradation mechanism and their economic viability are presented. An innovative module-level photovoltaic (PV) architecture in parallel configuration is introduced maximizing power extraction under partial shading. A new method for detecting demagnetization faults in axial flux permanent magnet synchronous wind generators is presented. The stochastic operating temperature (OT) optimization integrated with Markov Chain simulation ascertains a more accurate OT for guiding the coal gasification practice

Safety and Reliability - Safe Societies in a Changing World

The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk managemen

Atti del XXXV Convegno Nazionale di Idraulica e Costruzioni Idrauliche

La XXXV edizione del Convegno Nazionale di Idraulica e Costruzioni Idrauliche (IDRA16), co-organizzata dal Gruppo Italiano di Idraulica (GII) e dal Dipartimento di Ingegneria Civile, Chimica, Ambientale, e dei Materiali (DICAM) dell’Alma Mater Studiorum - Università di Bologna, si è svolta a Bologna dal 14 al 16 settembre 2016. Il Convegno Nazionale è tornato pertanto ad affacciarsi all’ombra del “Nettuno”, dopo l’edizione del 1982 (XVIII edizione). Il titolo della XXXV edizione, “Ambiente, Risorse, Energia: le sfide dell’Ingegneria delle acque in un mondo che cambia”, sottolinea l’importanza e la complessità delle tematiche che rivestono la sfera dello studio e del governo delle risorse idriche. Le sempre più profonde interconnessioni tra risorse idriche, sviluppo economico e benessere sociale, infatti, spronano sia l’Accademia che l’intera comunità tecnico-scientifica nazionale ed internazionale all’identificazione ed alla messa in atto di strategie di gestione innovative ed ottimali: sfide percepite quanto mai necessarie in un contesto ambientale in continua evoluzione, come quello in cui viviamo. La XXXV edizione del Convegno di Idraulica e Costruzioni Idrauliche, pertanto, si è posta come punto d’incontro della comunità tecnico-scientifica italiana per la discussione a tutto tondo di tali problematiche, offrendo un programma scientifico particolarmente ricco e articolato, che ha coperto tutti gli ambiti riconducibili all’Ingegneria delle Acque. L’apertura dei lavori del Convegno si è svolta nella storica cornice della Chiesa di Santa Cristina, uno dei luoghi più caratteristici e belli della città ed oggi luogo privilegiato per l’ascolto della musica classica, mentre le attività di presentazione e discussione scientifica si sono svolte principalmente presso la sede della Scuola di Ingegneria e Architettura dell’Università di Bologna sita in Via Terracini. Il presente volume digitale ad accesso libero (licenza Creative Commons 4.0) raccoglie le memorie brevi pervenute al Comitato Scientifico di IDRA16 ed accettate per la presentazione al convegno a valle di un processo di revisione tra pari. Il volume articola dette memorie in sette macro-tematiche, che costituiscono i capitoli del volume stesso: I. meccanica dei fluidi; II. ambiente marittimo e costiero; III. criteri, metodi e modelli per l’analisi dei processi idrologici e la gestione delle acque; IV. gestione e tutela dei corpi idrici e degli ecosistemi; V. valutazione e mitigazione del rischio idrologico e idraulico; VI. dinamiche acqua-società: sviluppo sostenibile e gestione del territorio; VII. monitoraggio, open-data e software libero. Ciascuna macro-tematica raggruppa più sessioni specialistiche autonome sviluppatesi in parallelo durante le giornate del Convegno, i cui titoli vengono richiamati all’interno del presente volume. La vastità e la diversità delle tematiche affrontate, che ben rappresentano la complessità delle numerose sfide dell’Ingegneria delle Acque, appaiono evidenti dalla consultazione dell’insieme di memorie brevi presentate. La convinta partecipazione della Comunità Scientifica Italiana è dimostrata dalle oltre 350 memorie brevi, distribuite in maniera pressoché uniforme tra le sette macro-tematiche di riferimento. Dette memorie sono sommari estesi di lunghezza variabile redatti in lingua italiana, o inglese. In particolare, la possibilità di stesura in inglese è stata concessa con l’auspicio di portare la visibilità del lavoro presentato ad un livello sovranazionale, grazie alla pubblicazione open access del volume degli Atti del Convegno. Il volume si divide in tre parti: la parte iniziale è dedicata alla presentazione del volume ed all’indice generale dei contributi divisi per macro-tematiche; la parte centrale raccoglie le memorie brevi; la terza parte riporta l’indice analitico degli Autori, che chiude il volume