A Review on Different Techniques of Mutual Coupling Reduction Between Elements of Any MIMO Antenna. Part 2: Metamaterials and Many More

This two‐part article presents a review of different techniques of mutual coupling (MC) reduction. MC reduction is a primary concern while designing a compact multiple‐input‐multiple‐output (MIMO) antenna where the separation between the antennas is less than λ0/2, that is, half of the free‐space wavelength. The negative permittivity and permeability of artificially created materials/structures (Metamaterials) significantly help reduce MC among narrow‐band compact MIMO antenna design elements. In this part two of the review paper, we will discuss techniques: Metamaterials; Split‐Ring‐Resonator; Complementary‐Split‐Ring‐Resonator; Frequency Selective Surface, Metasurface, Electromagnetic Band Gap structure, Decoupling and Matching network, Neutralization line, Cloaking Structures, Shorting vias and pins and few more

A Review on Different Techniques of Mutual Coupling Reduction Between Elements of Any MIMO Antenna. Part 1: DGSs and Parasitic Structures

This two-part article presents a review of different techniques of mutual coupling (MC) reduction. MC is a major issue when an array of antennas is densely packed. When the separation between the antennas i

Frequency Coded Chipless RFID Tag using Spurline Resonators

A novel compact chipless RFID tag using spurline resonators is discussed in this paper. The detection of the tag's ID is using the spectral signature of a spurline resonator circuit. The tag has a data capacity of 8-bits in the range 2.38 to 4.04 GHz. The tag consists of a spurline multiresonating circuit and two cross polarised antennas. The prototype of the tag is fabricated on a substrate C-MET/LK4.3 of dielectric constant 4.3 and loss tangent 0.0018. The measured results show that group delay response can also be used to decode the tag’s identity

Investigations on a low-profile, filter backed, printed monopole antenna for UWB communication

106-112A compact, printed dual band-notched, filter backed antenna or filtenna, with suppressed radiation characteristics outside the ultra-wide frequency band (UWB) has been scripted in this manuscript. The filtenna has been designed to work in the UWB frequency domain (03.1 - 10.6 GHz), as prescribed by federal communications commission (FCC). Band-notching structures have been incorporated in the radiating element for realization of dual band- notches for WLAN and WiMAX. The novelty lies in the fact that, a microstrip band pass filter has been introduced in the antenna feeding section for improvement of the cut-off frequency and frequency selectivity. An impedance bandwidth (S11 ≤ -10.0 dB) of 03.1 - 10.6 GHz has been obtained excepting two frequency-notches having centre frequencies of 03.5 GHz and 05.5 GHz, respectively. Promise able simulation results followed by measurement, justify the applicability of the novel filtenna for UWB communications

Design of a Microstrip Bandpass Filter for 3.1-10.6 GHz Uwb Systems

In this thesis, ultra-wideband (UWB) microwave filters and design challenges are studied and, a microstrip UWB filter prototype design is presented. The UWB bandpass filter operating in the 3.6 GHz to 10.6 GHz frequency band is targeted to comply with the FCC spectral mask for UWB systems. The prototype filter is composed of quarter-wavelength spaced shunt stub transmission lines. The circuit is first simulated and optimized by using AWR DE simulation software tool. Then Sonnet EM Simulation and CST EM Simulation Tools are further utilized to obtain more accurate simulated results. The fabricated microstrip UWB bandpass filter is then measured using a vector network analyzer and results are presented. The prototype built can be used in UWB communications or localization systems

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Compact UWB Monopole Antenna with Tunable Dual Band Notched Characteristics for WiMAX and WLAN Applications

The present work shows a planar compact ultra-wideband (UWB) monopole antenna with controllable dualband-notch frequencies at 3.3 GHz for WiMAX and 5 GHz for WLAN. In the proposed antenna, the lower notchband (at a frequency of 3.3 GHz) is made by cutting a thin horizontal strip on top of the radiating patch. The uppernotch band (at a frequency of 5 GHz) is made by putting two narrow parasitic strips in the shape of an “I” oneither side of the radiating patch. The incorporation of three varactor diodes between the radiating patch and three metallic strips provides the flexibility of adjusting the notch frequencies. The notch band tunability between 3.15 GHz and 3.69 GHz and between 4.93 GHz and 5.59 GHz, respectively, is achieved by changing the bias voltageof the varactor diode between 0 V and 30 V. The gain and efficiency characteristics of the designed antenna alsoexhibit band rejection at the respective notch frequencies. The design principle is validated by fabricating andmeasuring a prototype of the proposed dual-band, notched UWB antenna. For three different bias voltages of thevaractor, the simulated and experimental findings are in reasonable agreement. The proposed works demonstratebetter-notch characteristics as compared with other reported works over the UWB rang

Frequency reconfigurable patch antenna for 4G LTE applications

A compact printed multi-band frequency reconfigurable patch antenna for 4G LTE applications is presented in this paper (50 x 60 x 1.6 mm3). The antenna consists of W-shaped and Inverted-U shaped patch lines connected in a Tree-shape on the front side of the antenna. The back-side of the antenna contains a 90°-tilted T-shaped strip connected with an Inverted-L shaped strip which is shorted with a patch on the front side for increasing the electrical length to cover lower frequency bands. Frequency reconfigurability is achieved by inserting three switches i.e., PIN diodes. The most critical part of this work is the designing of RLC-based DC line circuits for providing the DC biasing to the PIN diodes used as switches and inserting them at optimum locations. This antenna is reconfigurable among eight different 4G LTE frequency bands including 0.9 GHz, 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.7 GHz, 1.8 GHz, 2.6 GHz, 3.5 GHz and WLAN band 2.5 GHz. The antenna exhibits different radiation patterns having a different direction of peak gain at different frequencies and for different switching combinations. The antenna is simulated with CST, and a prototype is fabricated to compare the measured and simulated results with good accuracy