Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Inter-carrier interference suppression in orthogonal frequency division multiple access (OFDMA) systems uplink

Ph.DDOCTOR OF PHILOSOPH

Modeling and Digital Mitigation of Transmitter Imperfections in Radio Communication Systems

To satisfy the continuously growing demands for higher data rates, modern radio communication systems employ larger bandwidths and more complex waveforms. Furthermore, radio devices are expected to support a rich mixture of standards such as cellular networks, wireless local-area networks, wireless personal area networks, positioning and navigation systems, etc. In general, a "smart'' device should be flexible to support all these requirements while being portable, cheap, and energy efficient. These seemingly conflicting expectations impose stringent radio frequency (RF) design challenges which, in turn, call for their proper understanding as well as developing cost-effective solutions to address them. The direct-conversion transceiver architecture is an appealing analog front-end for flexible and multi-standard radio systems. However, it is sensitive to various circuit impairments, and modern communication systems based on multi-carrier waveforms such as Orthogonal Frequency Division Multiplexing (OFDM) and Orthogonal Frequency Division Multiple Access (OFDMA) are particularly vulnerable to RF front-end non-idealities.This thesis addresses the modeling and digital mitigation of selected transmitter (TX) RF impairments in radio communication devices. The contributions can be divided into two areas. First, new modeling and digital mitigation techniques are proposed for two essential front-end impairments in direct-conversion architecture-based OFDM and OFDMA systems, namely inphase and quadrature phase (I/Q) imbalance and carrier frequency offset (CFO). Both joint and de-coupled estimation and compensation schemes for frequency-selective TX I/Q imbalance and channel distortions are proposed for OFDM systems, to be adopted on the receiver side. Then, in the context of uplink OFDMA and Single Carrier FDMA (SC-FDMA), which are the air interface technologies of the 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) and LTE-Advanced systems, joint estimation and equalization techniques of RF impairments and channel distortions are proposed. Here, the challenging multi-user uplink scenario with unequal received power levels is investigated where I/Q imbalance causes inter-user interference. A joint mirror subcarrier processing-based minimum mean-square error (MMSE) equalizer with an arbitrary number of receiver antennas is formulated to effectively handle the mirror sub-band users of different power levels. Furthermore, the joint channel and impairments filter responses are efficiently approximated with polynomial-based basis function models, and the parameters of basis functions are estimated with the reference signals conforming to the LTE uplink sub-frame structure. The resulting receiver concept adopting the proposed techniques enables improved link performance without modifying the design of RF transceivers.Second, digital baseband mitigation solutions are developed for the TX leakage signal-induced self-interference in frequency division duplex (FDD) transceivers. In FDD transceivers, a duplexer is used to connect the TX and receiver (RX) chains to a common antenna while also providing isolation to the receiver chain against the powerful transmit signal. In general, the continuous miniaturization of hardware and adoption of larger bandwidths through carrier aggregation type noncontiguous allocations complicates achieving sufficient TX-RX isolation. Here, two different effects of the transmitter leakage signal are investigated. The first is TX out-of-band (OOB) emissions and TX spurious emissions at own receiver band, due to the transmitter nonlinearity, and the second is nonlinearity of down-converter in the RX that generates second-order intermodulation distortion (IMD2) due to the TX in-band leakage signal. This work shows that the transmitter leakage signal-induced interference depends on an equivalent leakage channel that models the TX path non-idealities, duplexer filter responses, and the RX path non-idealities. The work proposes algorithms that operate in the digital baseband of the transceiver to estimate the TX-RX non-idealities and the duplexer filter responses, and subsequently regenerating and canceling the self-interference, thereby potentially relaxing the TX-RX isolation requirements as well as increasing the transceiver flexibility.Overall, this thesis provides useful signal models to understand the implications of different RF non-idealities and proposes compensation solutions to cope with certain RF impairments. This is complemented with extensive computer simulations and practical RF measurements to validate their application in real-world radio transceivers

Techniques d’Estimation de Canal et de Décalage de Fréquence Porteuse pour Systèmes Sans-fil Multiporteuses en Liaison Montante

Multicarrier modulation is the common feature of high-data rate mobile wireless systems. In that case, two phenomena disturb the symbol detection. Firstly, due to the relative transmitter-receiver motion and a difference between the local oscillator (LO) frequency at the transmitter and the receiver, a carrier frequency offset (CFO) affects the received signal. This leads to an intercarrier interference (ICI). Secondly, several versions of the transmitted signal are received due to the wireless propagation channel. These unwanted phenomena must be taken into account when designing a receiver. As estimating the multipath channel and the CFO is essential, this PhD deals with several CFO and channel estimation methods based on optimal filtering. Firstly, as the estimation issue is nonlinear, we suggest using the extended Kalman filter (EKF). It is based on a local linearization of the equations around the last state estimate. However, this approach requires a linearization based on calculations of Jacobians and Hessians matrices and may not be a sufficient description of the nonlinearity. For these reasons, we can consider the sigma-point Kalman filter (SPKF), namely the unscented Kalman Filter (UKF) and the central difference Kalman filter (CDKF). The UKF is based on the unscented transformation whereas the CDKF is based on the second order Sterling polynomial interpolation formula. Nevertheless, the above methods require an exact and accurate a priori system model as well as perfect knowledge of the additive measurementnoise statistics. Therefore, we propose to use the H∞ filtering, which is known to be more robust to uncertainties than Kalman filtering. As the state-space representation of the system is non-linear, we first evaluate the “extended H∞ filter”, which is based on a linearization of the state-space equations like the EKF. As an alternative, the “unscented H∞ filter”, which has been recently proposed in the literature, is implemented by embedding the unscented transformation into the “extended H∞ filter” and carrying out the filtering by using the statistical linear error propagation approach.Multicarrier modulation is the common feature of high-data rate mobile wireless systems. In that case, two phenomena disturb the symbol detection. Firstly, due to the relative transmitter-receiver motion and a difference between the local oscillator (LO) frequency at the transmitter and the receiver, a carrier frequency offset (CFO) affects the received signal. This leads to an intercarrier interference (ICI). Secondly, several versions of the transmitted signal are received due to the wireless propagation channel. These unwanted phenomena must be taken into account when designing a receiver. As estimating the multipath channel and the CFO is essential, this PhD deals with several CFO and channel estimation methods based on optimal filtering. Firstly, as the estimation issue is nonlinear, we suggest using the extended Kalman filter (EKF). It is based on a local linearization of the equations around the last state estimate. However, this approach requires a linearization based on calculations of Jacobians and Hessians matrices and may not be a sufficient description of the nonlinearity. For these reasons, we can consider the sigma-point Kalman filter (SPKF), namely the unscented Kalman Filter (UKF) and the central difference Kalman filter (CDKF). The UKF is based on the unscented transformation whereas the CDKF is based on the second order Sterling polynomial interpolation formula. Nevertheless, the above methods require an exact and accurate a priori system model as well as perfect knowledge of the additive measurementnoise statistics. Therefore, we propose to use the H∞ filtering, which is known to be more robust to uncertainties than Kalman filtering. As the state-space representation of the system is non-linear, we first evaluate the “extended H∞ filter”, which is based on a linearization of the state-space equations like the EKF. As an alternative, the “unscented H∞ filter”, which has been recently proposed in the literature, is implemented by embedding the unscented transformation into the “extended H∞ filter” and carrying out the filtering by using the statistical linear error propagation approach

Fine Timing and Frequency Synchronization for MIMO-OFDM: An Extreme Learning Approach

Multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) is a key technology component in the evolution towards cognitive radio (CR) in next-generation communication in which the accuracy of timing and frequency synchronization significantly impacts the overall system performance. In this paper, we propose a novel scheme leveraging extreme learning machine (ELM) to achieve high-precision synchronization. Specifically, exploiting the preamble signals with synchronization offsets, two ELMs are incorporated into a traditional MIMO-OFDM system to estimate both the residual symbol timing offset (RSTO) and the residual carrier frequency offset (RCFO). The simulation results show that the performance of the proposed ELM-based synchronization scheme is superior to the traditional method under both additive white Gaussian noise (AWGN) and frequency selective fading channels. Furthermore, comparing with the existing machine learning based techniques, the proposed method shows outstanding performance without the requirement of perfect channel state information (CSI) and prohibitive computational complexity. Finally, the proposed method is robust in terms of the choice of channel parameters (e.g., number of paths) and also in terms of "generalization ability" from a machine learning standpoint.Comment: 13 pages, 12 figures, has been accepted for publication in IEEE Transactions on Cognitive Communications and Networkin

Timing and Frequency Synchronization and Channel Estimation in OFDM-based Systems

Orthogonal frequency division multiplexing (OFDM) due to its appealing features, such as robustness against frequency selective fading and simple channel equalization, is adopted in communications systems such as WLAN, WiMAX and DVB. However, OFDM systems are sensitive to synchronization errors caused by timing and frequency offsets. Besides, the OFDM receiver has to perform channel estimation for coherent detection. The goal of this thesis is to investigate new methods for timing and frequency synchronization and channel estimation in OFDM-based systems. First, we investigate new methods for preamble-aided coarse timing estimation in OFDM systems. Two novel timing metrics using high order statistics-based correlation and differential normalization functions are proposed. The performance of the new timing metrics is evaluated using different criteria including class-separability, robustness to the carrier frequency offset, and computational complexity. It is shown that the new timing metrics can considerably increase the class-separability due to their more distinct values at correct and wrong timing instants, and thus give a significantly better detection performance than the existing timing metrics do. Furthermore, a new method for coarse estimation of the start of the frame is proposed, which remarkably reduces the probability of inter-symbol interference (ISI). The improved performances of the new schemes in multipath fading channels are shown by the probabilities of false alarm, missed-detection and ISI obtained through computer simulations. Second, a novel pilot-aided algorithm is proposed for the detection of integer frequency offset (IFO) in OFDM systems. By transforming the IFO into two new integer parameters, the proposed method can largely reduce the number of trial values for the true IFO. The two new integer parameters are detected using two different pilot sequences, a periodic pilot sequence and an aperiodic pilot sequence. It is shown that the new scheme can significantly reduce the computational complexity while achieving almost the same performance as the previous methods do. Third, we propose a method for joint timing and frequency synchronization and channel estimation for OFDM systems that operate in doubly selective channels. Basis expansion modeling (BEM) that captures the time variations of the channel is used to reduce the number of unknown channel parameters. The BEM coefficients along with the timing and frequency offsets are estimated by using a maximum likelihood (ML) approach. An efficient algorithm is then proposed for reducing the computational complexity of the joint estimation. The complexity of the new method is assessed in terms of the number of multiplications. The mean square estimation error of the proposed method is evaluated in comparison with previous methods, indicating a remarkable performance improvement by the new method. Fourth, we present a new scheme for joint estimation of CFO and doubly selective channel in orthogonal frequency division multiplexing systems. In the proposed preamble-aided method, the time-varying channel is represented using BEM. CFO and BEM coefficients are estimated using the principles of particle and Kalman filtering. The performance of the new method in multipath time-varying channels is investigated in comparison with previous schemes. The simulation results indicate a remarkable performance improvement in terms of the mean square errors of CFO and channel estimates. Fifth, a novel algorithm is proposed for timing and frequency synchronization and channel estimation in the uplink of orthogonal frequency division multiple access (OFDMA) systems by considering high-mobility situations and the generalized subcarrier assignment. By using BEM to represent a doubly selective channel, a maximum likelihood (ML) approach is proposed to jointly estimate the timing and frequency offsets of different users as well as the BEM coefficients of the time-varying channels. A space-alternating generalized expectation-maximization algorithm is then employed to transform the maximization problem for all users into several simpler maximization problems for each user. The computational complexity of the new timing and frequency offset estimator is analyzed and its performance in comparison with that of existing methods using the mean square error is evaluated . Finally, two novel approaches for joint CFO and doubly selective channel estimation in the uplink of multiple-input multiple-output orthogonal frequency division multiple access (MIMO-OFDMA) systems are presented. Considering high-mobility situations, where channels change within an OFDMA symbol interval, and the time varying nature of CFOs, BEM is employed to represent the time variations of the channel. Two new approaches are then proposed based on Schmidt Kalman filtering (SKF). The first approach utilizes Schmidt extended Kalman filtering for each user to estimate the CFO and BEM coefficients. The second approach uses Gaussian particle filter along with SKF to estimate the CFO and BEM coefficients of each user. The Bayesian Cramer Rao bound is derived, and performance of the new schemes are evaluated using mean square error. It is demonstrated that the new schemes can significantly improve the mean square error performance in comparison with that of the existing methods