A Graph Traversal Based Framework for Sequential Logic Implication with an Application to C-Cycle Redundancy Identification

Coordinated Science Laboratory was formerly known as Control Systems LaboratorySemiconductor Research Corporation / SRC 96-DP-109 and SRC 97-DS-482DARPA / DABT63-95-C-0069Hewlett-Packar

NEW ALGORITHM FOR BEHAVIOURAL TEST GENERATION

Significant efforts of the test design community have addressed the development of high level test generation algorithms in the last decade. The main problem originates in the insufficiently low gate level fault coverage of test sets generated at the behavioural or functional levels due to oversimplifications which result from the application of highly abstract and technology-independent fault models. In this paper a novel behavioural level test generation algorithm is presented effectively utilizing information on the circuit structure, which is extracted from the high level synthesis process. Experimental results show that the gate level fault coverage of the test sets generated by the new algorithm is similar to those assured by the gate level test generation algorithms

Observation mechanisms for in-field software-based self-test

When electronic systems are used in safety critical applications, as in the space, avionic, automotive or biomedical areas, it is required to maintain a very low probability of failures due to faults of any kind. Standards and regulations play a significant role, forcing companies to devise and adopt solutions able to achieve predefined targets in terms of dependability. Different techniques can be used to reduce fault occurrence or to minimize the probability that those faults produce critical failures (e.g., by introducing redundancy). Unfortunately, most of these techniques have a severe impact on the cost of the resulting product and, in some cases, the probability of failures is too large anyway. Hence, a solution commonly used in several scenarios lies on periodically performing a test able to detect the occurrence of any fault before it produces a failure (in-field test). This solution is normally based on forcing the processor inside the Device Under Test to execute a properly written test program, which is able to activate possible faults and to make their effects visible in some observable locations. This approach is also called Software-Based Self-Test, or SBST. If compared with testing in an end of manufacturing scenario, in-field testing has strong limitations in terms of access to the system inputs and outputs because Design for Testability structures and testing equipment are usually not available. As a consequence there are reduced possibilities to activate the faults and to observe their effects. This reduced observability particularly affects the ability to detect performance faults, i.e. faults that modify the timing but not the final value of computations. This kind of faults are hard to detect by only observing the final content of predefined memory locations, that is the usual test result observation method used in-field. Initially, the present work was focused on fault tolerance techniques against transient faults induced by ionizing radiation, the so called Single Event Upsets (SEUs). The main contribution of this early stage of the thesis lies in the experimental validation of the feasibility of achieving a safe system by using an architecture that combines task-level redundancy with already available IP cores, thus minimizing the development time. Task execution is replicated and Memory Protection is used to guarantee that any SEU may affect one and only one of the replicas. A proof of concept implementation was developed and validated using fault injection. Results outline the effectiveness of the architecture, and the overhead analysis shows that the proposed architecture is effective in reducing the resource occupation with respect to N-modular redundancy, at an affordable cost in terms of application execution time. The main part of the thesis is focused on in-field software-based self-test of permanent faults. A set of observation methods exploiting existing or ad-hoc hardware is proposed, aimed at obtaining a better coverage, in particular of performance faults. An extensive quantitative evaluation of the proposed methods is presented, including a comparison with the observation methods traditionally used in end of manufacturing and in-field testing. Results show that the proposed methods are a good complement to the traditionally used final memory content observation. Moreover, they show that an adequate combination of these complementary methods allows for achieving nearly the same fault coverage achieved when continuously observing all the processor outputs, which is an observation method commonly used for production test but usually not available in-field. A very interesting by-product of what is described above is a detailed description of how to compute the fault coverage achieved by functional in-field tests using a conventional fault simulator, a tool that is usually applied in an end of manufacturing testing scenario. Finally, another relevant result in the testing area is a method to detect permanent faults inside the cache coherence logic integrated in each cache controller of a multi-core system, based on the concurrent execution of a test program by the different cores in a coordinated manner. By construction, the method achieves full fault coverage of the static faults in the addressed logic.Cuando se utilizan sistemas electrónicos en aplicaciones críticas como en las áreas biomédica, aeroespacial o automotriz, se requiere mantener una muy baja probabilidad de malfuncionamientos debidos a cualquier tipo de fallas. Los estándares y normas juegan un papel importante, forzando a los desarrolladores a diseñar y adoptar soluciones que sean capaces de alcanzar objetivos predefinidos en cuanto a seguridad y confiabilidad. Pueden utilizarse diferentes técnicas para reducir la ocurrencia de fallas o para minimizar la probabilidad de que esas fallas produzcan mal funcionamientos críticos, por ejemplo a través de la incorporación de redundancia. Lamentablemente, muchas de esas técnicas afectan en gran medida el costo de los productos y, en algunos casos, la probabilidad de malfuncionamiento sigue siendo demasiado alta. En consecuencia, una solución usada a menudo en varios escenarios consiste en realizar periódicamente un test que sea capaz de detectar la ocurrencia de una falla antes de que esta produzca un mal funcionamiento (test en campo). En general, esta solución se basa en forzar a un procesador existente dentro del dispositivo bajo prueba a ejecutar un programa de test que sea capaz de activar las posibles fallas y de hacer que sus efectos sean visibles en puntos observables. A esta metodología también se la llama auto-test basado en software, o en inglés Software-Based Self-Test (SBST). Si se lo compara con un escenario de test de fin de fabricación, el test en campo tiene fuertes limitaciones en términos de posibilidad de acceso a las entradas y salidas del sistema, porque usualmente no se dispone de equipamiento de test ni de la infraestructura de Design for Testability. En consecuencia se tiene menos posibilidades de activar las fallas y de observar sus efectos. Esta observabilidad reducida afecta particularmente la habilidad para detectar fallas de performance, es decir fallas que modifican la temporización pero no el resultado final de los cálculos. Este tipo de fallas es difícil de detectar por la sola observación del contenido final de lugares de memoria, que es el método usual que se utiliza para observar los resultados de un test en campo. Inicialmente, el presente trabajo estuvo enfocado en técnicas para tolerar fallas transitorias inducidas por radiación ionizante, llamadas en inglés Single Event Upsets (SEUs). La principal contribución de esa etapa inicial de la tesis reside en la validación experimental de la viabilidad de obtener un sistema seguro, utilizando una arquitectura que combina redundancia a nivel de tareas con el uso de módulos hardware (IP cores) ya disponibles, que minimiza en consecuencia el tiempo de desarrollo. Se replica la ejecución de las tareas y se utiliza protección de memoria para garantizar que un SEU pueda afectar a lo sumo a una sola de las réplicas. Se desarrolló una implementación para prueba de concepto que fue validada mediante inyección de fallas. Los resultados muestran la efectividad de la arquitectura, y el análisis de los recursos utilizados muestra que la arquitectura propuesta es efectiva en reducir la ocupación con respecto a la redundancia modular con N réplicas, a un costo accesible en términos de tiempo de ejecución. La parte principal de esta tesis se enfoca en el área de auto-test en campo basado en software para la detección de fallas permanentes. Se propone un conjunto de métodos de observación utilizando hardware existente o ad-hoc, con el fin de obtener una mejor cobertura, en particular de las fallas de performance. Se presenta una extensa evaluación cuantitativa de los métodos propuestos, que incluye una comparación con los métodos tradicionalmente utilizados en tests de fin de fabricación y en campo. Los resultados muestran que los métodos propuestos son un buen complemento del método tradicionalmente usado que consiste en observar el valor final del contenido de memoria. Además muestran que una adecuada combinación de estos métodos complementarios permite alcanzar casi los mismos valores de cobertura de fallas que se obtienen mediante la observación continua de todas las salidas del procesador, método comúnmente usado en tests de fin de fabricación, pero que usualmente no está disponible en campo. Un subproducto muy interesante de lo arriba expuesto es la descripción detallada del procedimiento para calcular la cobertura de fallas lograda mediante tests funcionales en campo por medio de un simulador de fallas convencional, una herramienta que usualmente se aplica en escenarios de test de fin de fabricación. Finalmente, otro resultado relevante en el área de test es un método para detectar fallas permanentes dentro de la lógica de coherencia de cache que está integrada en el controlador de cache de cada procesador en un sistema multi procesador. El método está basado en la ejecución de un programa de test en forma coordinada por parte de los diferentes procesadores. Por construcción, el método cubre completamente las fallas de la lógica mencionad

Fault simulation and test generation for small delay faults

Delay faults are an increasingly important test challenge. Traditional delay fault models are incomplete in that they model only a subset of delay defect behaviors. To solve this problem, a more realistic delay fault model has been developed which models delay faults caused by the combination of spot defects and parametric process variation. According to the new model, a realistic delay fault coverage metric has been developed. Traditional path delay fault coverage metrics result in unrealistically low fault coverage, and the real test quality is not reflected. The new metric uses a statistical approach and the simulation based fault coverage is consistent with silicon data. Fast simulation algorithms are also included in this dissertation. The new metric suggests that testing the K longest paths per gate (KLPG) has high detection probability for small delay faults under process variation. In this dissertation, a novel automatic test pattern generation (ATPG) methodology to find the K longest testable paths through each gate for both combinational and sequential circuits is presented. Many techniques are used to reduce search space and CPU time significantly. Experimental results show that this methodology is efficient and able to handle circuits with an exponential number of paths, such as ISCAS85 benchmark circuit c6288. The ATPG methodology has been implemented on industrial designs. Speed binning has been done on many devices and silicon data has shown significant benefit of the KLPG test, compared to several traditional delay test approaches

Innovative Techniques for Testing and Diagnosing SoCs

We rely upon the continued functioning of many electronic devices for our everyday welfare, usually embedding integrated circuits that are becoming even cheaper and smaller with improved features. Nowadays, microelectronics can integrate a working computer with CPU, memories, and even GPUs on a single die, namely System-On-Chip (SoC). SoCs are also employed on automotive safety-critical applications, but need to be tested thoroughly to comply with reliability standards, in particular the ISO26262 functional safety for road vehicles. The goal of this PhD. thesis is to improve SoC reliability by proposing innovative techniques for testing and diagnosing its internal modules: CPUs, memories, peripherals, and GPUs. The proposed approaches in the sequence appearing in this thesis are described as follows: 1. Embedded Memory Diagnosis: Memories are dense and complex circuits which are susceptible to design and manufacturing errors. Hence, it is important to understand the fault occurrence in the memory array. In practice, the logical and physical array representation differs due to an optimized design which adds enhancements to the device, namely scrambling. This part proposes an accurate memory diagnosis by showing the efforts of a software tool able to analyze test results, unscramble the memory array, map failing syndromes to cell locations, elaborate cumulative analysis, and elaborate a final fault model hypothesis. Several SRAM memory failing syndromes were analyzed as case studies gathered on an industrial automotive 32-bit SoC developed by STMicroelectronics. The tool displayed defects virtually, and results were confirmed by real photos taken from a microscope. 2. Functional Test Pattern Generation: The key for a successful test is the pattern applied to the device. They can be structural or functional; the former usually benefits from embedded test modules targeting manufacturing errors and is only effective before shipping the component to the client. The latter, on the other hand, can be applied during mission minimally impacting on performance but is penalized due to high generation time. However, functional test patterns may benefit for having different goals in functional mission mode. Part III of this PhD thesis proposes three different functional test pattern generation methods for CPU cores embedded in SoCs, targeting different test purposes, described as follows: a. Functional Stress Patterns: Are suitable for optimizing functional stress during I Operational-life Tests and Burn-in Screening for an optimal device reliability characterization b. Functional Power Hungry Patterns: Are suitable for determining functional peak power for strictly limiting the power of structural patterns during manufacturing tests, thus reducing premature device over-kill while delivering high test coverage c. Software-Based Self-Test Patterns: Combines the potentiality of structural patterns with functional ones, allowing its execution periodically during mission. In addition, an external hardware communicating with a devised SBST was proposed. It helps increasing in 3% the fault coverage by testing critical Hardly Functionally Testable Faults not covered by conventional SBST patterns. An automatic functional test pattern generation exploiting an evolutionary algorithm maximizing metrics related to stress, power, and fault coverage was employed in the above-mentioned approaches to quickly generate the desired patterns. The approaches were evaluated on two industrial cases developed by STMicroelectronics; 8051-based and a 32-bit Power Architecture SoCs. Results show that generation time was reduced upto 75% in comparison to older methodologies while increasing significantly the desired metrics. 3. Fault Injection in GPGPU: Fault injection mechanisms in semiconductor devices are suitable for generating structural patterns, testing and activating mitigation techniques, and validating robust hardware and software applications. GPGPUs are known for fast parallel computation used in high performance computing and advanced driver assistance where reliability is the key point. Moreover, GPGPU manufacturers do not provide design description code due to content secrecy. Therefore, commercial fault injectors using the GPGPU model is unfeasible, making radiation tests the only resource available, but are costly. In the last part of this thesis, we propose a software implemented fault injector able to inject bit-flip in memory elements of a real GPGPU. It exploits a software debugger tool and combines the C-CUDA grammar to wisely determine fault spots and apply bit-flip operations in program variables. The goal is to validate robust parallel algorithms by studying fault propagation or activating redundancy mechanisms they possibly embed. The effectiveness of the tool was evaluated on two robust applications: redundant parallel matrix multiplication and floating point Fast Fourier Transform

New techniques for functional testing of microprocessor based systems

Electronic devices may be affected by failures, for example due to physical defects. These defects may be introduced during the manufacturing process, as well as during the normal operating life of the device due to aging. How to detect all these defects is not a trivial task, especially in complex systems such as processor cores. Nevertheless, safety-critical applications do not tolerate failures, this is the reason why testing such devices is needed so to guarantee a correct behavior at any time. Moreover, testing is a key parameter for assessing the quality of a manufactured product. Consolidated testing techniques are based on special Design for Testability (DfT) features added in the original design to facilitate test effectiveness. Design, integration, and usage of the available DfT for testing purposes are fully supported by commercial EDA tools, hence approaches based on DfT are the standard solutions adopted by silicon vendors for testing their devices. Tests exploiting the available DfT such as scan-chains manipulate the internal state of the system, differently to the normal functional mode, passing through unreachable configurations. Alternative solutions that do not violate such functional mode are defined as functional tests. In microprocessor based systems, functional testing techniques include software-based self-test (SBST), i.e., a piece of software (referred to as test program) which is uploaded in the system available memory and executed, with the purpose of exciting a specific part of the system and observing the effects of possible defects affecting it. SBST has been widely-studies by the research community for years, but its adoption by the industry is quite recent. My research activities have been mainly focused on the industrial perspective of SBST. The problem of providing an effective development flow and guidelines for integrating SBST in the available operating systems have been tackled and results have been provided on microprocessor based systems for the automotive domain. Remarkably, new algorithms have been also introduced with respect to state-of-the-art approaches, which can be systematically implemented to enrich SBST suites of test programs for modern microprocessor based systems. The proposed development flow and algorithms are being currently employed in real electronic control units for automotive products. Moreover, a special hardware infrastructure purposely embedded in modern devices for interconnecting the numerous on-board instruments has been interest of my research as well. This solution is known as reconfigurable scan networks (RSNs) and its practical adoption is growing fast as new standards have been created. Test and diagnosis methodologies have been proposed targeting specific RSN features, aimed at checking whether the reconfigurability of such networks has not been corrupted by defects and, in this case, at identifying the defective elements of the network. The contribution of my work in this field has also been included in the first suite of public-domain benchmark networks

Improving timing verification and delay testing methodologies for IC designs

textThe task of ensuring the correct temporal behavior of IC designs, both before and after fabrication, is extremely important. It is becoming even more imperative as the demand for performance increases and process technology advances into the deep sub-micron region. This dissertation tackles the key issues in the timing verification and delay testing methodologies. An efficient methodology is presented to identify false timing paths in the timing verification methodology which utilizes ATPG technique and timing information from an ordered list of timing paths according to the delay information. This dissertation also presents a speed binning methodology which utilizes structural delay tests successfully instead of functional tests. In addition, it establishes a methodology which quantifies the correlation between the timing verification prediction and actual silicon measurement of timing paths. This quantification methodology lays the foundation for further research to study the impact of deep submicron effects on design performanceElectrical and Computer Engineerin

Compressed Skewed-Load Delay Test Generation Based on Evolution and Deterministic Initialization of Populations

The current design and manufacturing semiconductor technologies require to test the products against delay related defects. However, complex acpSOC require low-overhead testability methods to keep the test cost at an acceptable level. Skewed-load tests seem to be the appropriate way to test delay faults in these acpSOC because the test application requires only one storage element per scan cell. Compressed skewed-load test generator based on genetic algorithm is proposed for wrapper-based logic cores of acpSOC. Deterministic population initialization is used to ensure the highest achievable aclTDF coverage for the given wrapper and scan cell order. The developed method performs test data compression by generating test vectors containing already overlapped test vector pairs. The experimental results show high fault coverages, decreased test lengths and better scalability in comparison to recent methods

Self-Test Mechanisms for Automotive Multi-Processor System-on-Chips

L'abstract è presente nell'allegato / the abstract is in the attachmen

Methodology to accelerate diagnostic coverage assessment: MADC

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia Elétrica, Florianópolis, 2016.Os veículos da atualidade vêm integrando um número crescente de eletrônica embarcada, com o objetivo de permitir uma experiência mais segura aos motoristas. Logo, a garantia da segurança física é um requisito que precisa ser observada por completo durante o processo de desenvolvimento. O padrão ISO 26262 provê medidas para garantir que esses requisitos não sejam negligenciados. Injeção de falhas é fortemente recomendada quando da verificação do funcionamento dos mecanismos de segurança implementados, assim como sua capacidade de cobertura associada ao diagnóstico de falhas existentes. A análise exaustiva não é obrigatória, mas evidências de que o máximo esforço foi feito para acurar a cobertura de diagnóstico precisam ser apresentadas, principalmente durante a avalição dos níveis de segurança associados a arquitetura implementada em hardware. Estes níveis dão suporte às alegações de que o projeto obedece às métricas de segurança da integridade física exigida em aplicações automotivas. Os níveis de integridade variam de A à D, sendo este último o mais rigoroso. Essa Tese explora o estado-da-arte em soluções de verificação, e tem por objetivo construir uma metodologia que permita acelerar a verificação da cobertura de diagnóstico alcançado. Diferentemente de outras técnicas voltadas à aceleração de injeção de falhas, a metodologia proposta utiliza uma plataforma de hardware dedicada à verificação, com o intuito de maximizar o desempenho relativo a simulação de falhas. Muitos aspectos relativos a ISO 26262 são observados de forma que a presente contribuição possa ser apreciada no segmento automotivo. Por fim, uma arquitetura OpenRISC é utilizada para confirmar os resultados alcançados com essa solução proposta pertencente ao estado-da-arte.Abstract : Modern vehicles are integrating a growing number of electronics to provide a safer experience for the driver. Therefore, safety is a non-negotiable requirement that must be considered through the vehicle development process. The ISO 26262 standard provides guidance to ensure that such requirements are implemented. Fault injection is highly recommended for the functional verification of safety mechanisms or to evaluate their diagnostic coverage capability. An exhaustive analysis is not required, but evidence of best effort through the diagnostic coverage assessment needs to be provided when performing quantitative evaluation of hardware architectural metrics. These metrics support that the automotive safety integrity level ? ranging from A (lowest) to D (strictest) levels ? was obeyed. This thesis explores the most advanced verification solutions in order to build a methodology to accelerate the diagnostic coverage assessment. Different from similar techniques for fault injection acceleration, the proposed methodology does not require any modification of the design model to enable acceleration. Many functional safety requisites in the ISO 26262 are considered thus allowing the contribution presented to be a suitable solution for the automotive segment. An OpenRISC architecture is used to confirm the results achieved by this state-of-the-art solution