Virtual reality training and assessment in laparoscopic rectum surgery

Background: Virtual-reality (VR) based simulation techniques offer an efficient and low cost alternative to conventional surgery training. This article describes a VR training and assessment system in laparoscopic rectum surgery. Methods: To give a realistic visual performance of interaction between membrane tissue and surgery tools, a generalized cylinder based collision detection and a multi-layer mass-spring model are presented. A dynamic assessment model is also designed for hierarchy training evaluation. Results: With this simulator, trainees can operate on the virtual rectum with both visual and haptic sensation feedback simultaneously. The system also offers surgeons instructions in real time when improper manipulation happens. The simulator has been tested and evaluated by ten subjects. Conclusions: This prototype system has been verified by colorectal surgeons through a pilot study. They believe the visual performance and the tactile feedback are realistic. It exhibits the potential to effectively improve the surgical skills of trainee surgeons and significantly shorten their learning curve. © 2014 John Wiley & Sons, Ltd

Articular human joint modelling

Copyright @ Cambridge University Press 2009.The work reported in this paper encapsulates the theories and algorithms developed to drive the core analysis modules of the software which has been developed to model a musculoskeletal structure of anatomic joints. Due to local bone surface and contact geometry based joint kinematics, newly developed algorithms make the proposed modeller different from currently available modellers. There are many modellers that are capable of modelling gross human body motion. Nevertheless, none of the available modellers offer complete elements of joint modelling. It appears that joint modelling is an extension of their core analysis capability, which, in every case, appears to be musculoskeletal motion dynamics. It is felt that an analysis framework that is focused on human joints would have significant benefit and potential to be used in many orthopaedic applications. The local mobility of joints has a significant influence in human motion analysis, in understanding of joint loading, tissue behaviour and contact forces. However, in order to develop a bone surface based joint modeller, there are a number of major problems, from tissue idealizations to surface geometry discretization and non-linear motion analysis. This paper presents the following: (a) The physical deformation of biological tissues as linear or non-linear viscoelastic deformation, based on spring-dashpot elements. (b) The linear dynamic multibody modelling, where the linear formulation is established for small motions and is particularly useful for calculating the equilibrium position of the joint. This model can also be used for finding small motion behaviour or loading under static conditions. It also has the potential of quantifying the joint laxity. (c) The non-linear dynamic multibody modelling, where a non-matrix and algorithmic formulation is presented. The approach allows handling complex material and geometrical nonlinearity easily. (d) Shortest path algorithms for calculating soft tissue line of action geometries. The developed algorithms are based on calculating minimum ‘surface mass’ and ‘surface covariance’. An improved version of the ‘surface covariance’ algorithm is described as ‘residual covariance’. The resulting path is used to establish the direction of forces and moments acting on joints. This information is needed for linear or non-linear treatment of the joint motion. (e) The final contribution of the paper is the treatment of the collision. In the virtual world, the difficulty in analysing bodies in motion arises due to body interpenetrations. The collision algorithm proposed in the paper involves finding the shortest projected ray from one body to the other. The projection of the body is determined by the resultant forces acting on it due to soft tissue connections under tension. This enables the calculation of collision condition of non-convex objects accurately. After the initial collision detection, the analysis involves attaching special springs (stiffness only normal to the surfaces) at the ‘potentially colliding points’ and motion of bodies is recalculated. The collision algorithm incorporates the rotation as well as translation. The algorithm continues until the joint equilibrium is achieved. Finally, the results obtained based on the software are compared with experimental results obtained using cadaveric joints

NOViSE: a virtual natural orifice transluminal endoscopic surgery simulator

Purpose: Natural Orifice Transluminal Endoscopic Surgery (NOTES) is a novel technique in minimally invasive surgery whereby a flexible endoscope is inserted via a natural orifice to gain access to the abdominal cavity, leaving no external scars. This innovative use of flexible endoscopy creates many new challenges and is associated with a steep learning curve for clinicians. Methods: We developed NOViSE - the first force-feedback enabled virtual reality simulator for NOTES training supporting a flexible endoscope. The haptic device is custom built and the behaviour of the virtual flexible endoscope is based on an established theoretical framework – the Cosserat Theory of Elastic Rods. Results: We present the application of NOViSE to the simulation of a hybrid trans-gastric cholecystectomy procedure. Preliminary results of face, content and construct validation have previously shown that NOViSE delivers the required level of realism for training of endoscopic manipulation skills specific to NOTES Conclusions: VR simulation of NOTES procedures can contribute to surgical training and improve the educational experience without putting patients at risk, raising ethical issues or requiring expensive animal or cadaver facilities. In the context of an experimental technique, NOViSE could potentially facilitate NOTES development and contribute to its wider use by keeping practitioners up to date with this novel surgical technique. NOViSE is a first prototype and the initial results indicate that it provides promising foundations for further development

Real-time Knowledge-based Fuzzy Logic Model for Soft Tissue Deformation

In this research, the improved mass spring model is presented to simulate the human liver deformation. The underlying MSM is redesigned where fuzzy knowledge-based approaches are implemented to determine the stiffness values. Results show that fuzzy approaches are in very good agreement to the benchmark model. The novelty of this research is that for liver deformation in particular, no specific contributions in the literature exist reporting on real-time knowledge-based fuzzy MSM for liver deformation

GPU-based Real-Time Soft Tissue Deformation with Cutting and Haptic Feedback

Special Issue on Biomechanical Modelling of Soft Tissue MotionInternational audienceThis article describes a series of contributions in the field of real-time simulation of soft tissue biomechanics. These contributions address various requirements for interactive simulation of complex surgical procedures. In particular, this article presents results in the areas of soft tissue deformation, contact modelling, simulation of cutting, and haptic rendering, which are all relevant to a variety of medical interventions. The contributions described in this article share a common underlying model of deformation and rely on GPU implementations to significantly improve computation times. This consistency in the modelling technique and computational approach ensures coherent results as well as efficient, robust and flexible solutions

A 3D discrete model of the diaphragm and human trunk

In this paper, a 3D discrete model is presented to model the movements of the trunk during breathing. In this model, objects are represented by physical particles on their contours. A simple notion of force generated by a linear actuator allows the model to create forces on each particle by way of a geometrical attractor. Tissue elasticity and contractility are modeled by local shape memory and muscular fibers attractors. A specific dynamic MRI study was used to build a simple trunk model comprised of by three compartments: lungs, diaphragm and abdomen. This model was registered on the real geometry. Simulation results were compared qualitatively as well as quantitatively to the experimental data, in terms of volume and geometry. A good correlation was obtained between the model and the real data. Thanks to this model, pathology such as hemidiaphragm paralysis can also be simulated.Comment: published in: "Lung Modelling", France (2006

Research on real-time physics-based deformation for haptic-enabled medical simulation

This study developed a multiple effective visuo-haptic surgical engine to handle a variety of surgical manipulations in real-time. Soft tissue models are based on biomechanical experiment and continuum mechanics for greater accuracy. Such models will increase the realism of future training systems and the VR/AR/MR implementations for the operating room

Essential techniques for laparoscopic surgery simulation

Laparoscopic surgery is a complex minimum invasive operation that requires long learning curve for the new trainees to have adequate experience to become a qualified surgeon. With the development of virtual reality technology, virtual reality-based surgery simulation is playing an increasingly important role in the surgery training. The simulation of laparoscopic surgery is challenging because it involves large non-linear soft tissue deformation, frequent surgical tool interaction and complex anatomical environment. Current researches mostly focus on very specific topics (such as deformation and collision detection) rather than a consistent and efficient framework. The direct use of the existing methods cannot achieve high visual/haptic quality and a satisfactory refreshing rate at the same time, especially for complex surgery simulation. In this paper, we proposed a set of tailored key technologies for laparoscopic surgery simulation, ranging from the simulation of soft tissues with different properties, to the interactions between surgical tools and soft tissues to the rendering of complex anatomical environment. Compared with the current methods, our tailored algorithms aimed at improving the performance from accuracy, stability and efficiency perspectives. We also abstract and design a set of intuitive parameters that can provide developers with high flexibility to develop their own simulators