Improvement of a Propagation Delay Model for CMOS Digital Logic Circuits

Propagation delay models, for CMOS Digital Circuits, provide an initial design solution for Integrated Circuits. Resources, both monetary and manpower, constrain the design process, leading to the need for a more accurate entry point further along in the design cycle. By verifying an existing propagation delay method, and its resulting delay model, calibration for any given process technology can be achieved. Literature reviews and detailed analysis of each step in the model development allow for greater understanding of each contributing parameter, and ultimately, adjustments to the model calibration result in a more accurate analytical model. An existing model was verified and improved upon using TSMC 0.18um and IBM 0.13um SPICE decks, and the resulting improvements can be used to further assist individuals needing a method and model for deriving an initial circuit design solution for integrated circuits

Gate-level timing analysis and waveform evaluation

Static timing analysis (STA) is an integral part of modern VLSI chip design. Table lookup based methods are widely used in current industry due to its fast runtime and mature algorithms. Conventional STA algorithms based on table-lookup methods are developed under many assumptions in timing analysis; however, most of those assumptions, such as that input signals and output signals can be accurately modeled as ramp waveforms, are no longer satisfactory to meet the increasing demand of accuracy for new technologies. In this dissertation, we discuss several crucial issues that conventional STA has not taken into consideration, and propose new methods to handle these issues and show that new methods produce accurate results. In logic circuits, gates may have multiple inputs and signals can arrive at these inputs at different times and with different waveforms. Different arrival times and waveforms of signals can cause very different responses. However, multiple-input transition effects are totally overlooked by current STA tools. Using a conventional single-input transition model when multiple-input transition happens can cause significant estimation errors in timing analysis. Previous works on this issue focus on developing a complicated gate model to simulate the behavior of logic gates. These methods have high computational cost and have to make significant changes to the prevailing STA tools, and are thus not feasible in practice. This dissertation proposes a simplified gate model, uses transistor connection structures to capture the behavior of multiple-input transitions and requires no change to the current STA tools. Another issue with table lookup based methods is that the load of each gate in technology libraries is modeled as a single lumped capacitor. But in the real circuit, the Abstract 2 gate connects to its subsequent gates via metal wires. As the feature size of integrated circuit scales down, the interconnection cannot be seen as a simple capacitor since the resistive shielding effect will largely affect the equivalent capacitance seen from the gate. As the interconnection has numerous structures, tabulating the timing data for various interconnection structures is not feasible. In this dissertation, by using the concept of equivalent admittance, we reduce an arbitrary interconnection structure into an equivalent π-model RC circuit. Many previous works have mapped the π-model to an effective capacitor, which makes the table lookup based methods useful again. However, a capacitor cannot be equivalent to a π-model circuit, and will thus result in significant inaccuracy in waveform evaluation. In order to obtain an accurate waveform at gate output, a piecewise waveform evaluation method is proposed in this dissertation. Each part of the piecewise waveform is evaluated according to the gate characteristic and load structures. Another contribution of this dissertation research is a proposed equivalent waveform search method. The signal waveforms can be very complicated in the real circuits because of noises, race hazards, etc. The conventional STA only uses one attribute (i.e., transition time) to describe the waveform shape which can cause significant estimation errors. Our approach is to develop heuristic search functions to find equivalent ramps to approximate input waveforms. Here the transition time of a final ramp can be completely different from that of the original waveform, but we can get higher accuracy on output arrival time and transition time. All of the methods mentioned in this dissertation require no changes to the prevailing STA tools, and have been verified across different process technologies

Accurate multiple input switching solution for static timing analysis

Multiple Input switching is a problem in Static Timing Analysis of nanoscale electronics, which is ignored in the industry. The methods and techniques of Static Timing analysis are discussed. Effective capacitance technique is presented. The composite current model is described and examined. The Multiple Input switching problem is explored and analyzed. The history effect in Multiple Input switching is explained. The miller capacitance effect is illustrated. A number of solutions, present in the literature, are discussed. A simple and innovative solution for the Multiple Input switching problem is presented. The solution is verified using Spice and matlab. Experimental evidence is presented to show the effectiveness of the solution. Matlab is used to simulate the solution. An Algorithm for minimum and maximum delay analysis is elaborated

Method for Sizing MOS Transistors for VLSI

Determining the device width to length ratios has typically been an iterative process for the custom IC digital design engineer. After the logic design phase is complete for a particular circuit, the designer would make an educated guess at the device sizes. Then by trial and error, using SPICE or another circuit simulator, suitable sizes would be determined. Unfortunately, this approach is time consuming and the resulting sizes are often a good bit larger than they need to be to maintain a certain speed because of the lack of a rigorous sizing methodology. This paper describes a method for reducing the time in obtaining a CMOS circuit design by providing the designer with transistor sizes which yield consistent gate to gate propagation delays within a delay path. The technical justifications are developed and several test cases are synthesized to illustrate this method. Switching time accuracy is verified using SPICE and the automatically generated sizes. A program written in the Ada language to perform device sizing is discussed as well. The ramifications of area reduction are discussed as it pertains to custom and semicustom design methodologies. Algorithms to perform area minimization are presented along with other enhancements to the program

Register-transfer-level power profiling for system-on-chip power distribution network design and signoff

Abstract. This thesis is a study of how register-transfer-level (RTL) power profiling can help the design and signoff of power distribution network in digital integrated circuits. RTL power profiling is a method which collects RTL power estimation results to a single power profile which then can be analysed in order to find interesting time windows for specifying power distribution network design and signoff. The thesis starts with theory part. Complementary metal-oxide semiconductor (CMOS) inverter power dissipation is studied at first. Next, power distribution network structure and voltage drop problems are introduced. Voltage drop is demonstrated by using power distribution network impedance figures. Common on-chip power distribution network structure is introduced, and power distribution network design flow is outlined. Finally, decoupling capacitors function and impact on power distribution network impedance are thoroughly explained. The practical part of the thesis contains RTL power profiling flow details and power profiling flow results for one simulation case in one design block. Also, some methods of improving RTL power estimation accuracy are discussed and calibration with extracted parasitic is then used to get new set of power profiling time windows. After the results are presented, overall RTL power estimation accuracy is analysed and resulted time windows are compared to reference gate-level time windows. RTL power profiling result analysis shows that resulted time windows match the theory and RTL power profiling seems to be a promising method for finding time windows for power distribution network design and signoff.Rekisterisiirtotason tehoprofilointi järjestelmäpiirin tehonsiirtoverkon suunnittelussa ja verifioinnissa. Tiivistelmä. Tässä työssä tutkitaan, miten rekisterisiirtotason (RTL) tehoprofilointi voi auttaa digitaalisten integroitujen piirien tehonsiirtoverkon suunnittelussa ja verifioinnissa. RTL-tehoprofilointi on menetelmä, joka analysoi RTL-tehoestimoinnista saadusta tehokäyrästä hyödyllisiä aikaikkunoita tehonsiirtoverkon suunnitteluun ja verifiointiin. Työ alkaa teoriaosuudella, jonka aluksi selitetään, miten CMOS-invertteri kuluttaa tehoa. Seuravaksi esitellään tehonsiirtoverkon rakenne ja pahimmat tehonsiirtoverkon jännitehäviön aiheuttajat. Jännitehäviötä havainnollistetaan myös piirikaavioiden ja impedanssikäyrien avustuksella. Lisäksi integroidun piirin tehonsiirtoverkon suunnitteluvuo ja yleisin rakenne on esitelty. Lopuksi teoriaosuus käsittelee yksityiskohtaisesti ohituskondensaattoreiden toiminnan ja vaikutuksen tehonsiirtoverkon kokonaisimpedanssiin. Työn kokeellisessa osuudessa esitellään ensin tehoprofiloinnin vuo ja sen jälkeen vuon tulokset yhdelle esimerkkilohkolle yhdessä simulaatioajossa. Lisäksi tässä osiossa käsitellään RTL-tehoestimoinnin tarkkuutta ja tehdään RTL-tehoprofilointi loisimpedansseilla kalibroidulle RTL-mallille. Lopuksi RTL-tehoestimoinnin tuloksia ja saatuja RTL-tehoprofiloinnin aikaikkunoita analysoidaan ja verrataan porttitason mallin tuloksiin. RTL-tehoprofiloinnin tulosten analysointi osoittaa, että saatavat aikaikkunat vastaavat teoriaa ja että RTL-tehoprofilointi näyttää lupaavalta menetelmältä tehosiirtoverkon analysoinnin ja verifioinnin aikaikkunoiden löytämiseen

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast

Skybridge: 3-D Integrated Circuit Technology Alternative to CMOS

Continuous scaling of CMOS has been the major catalyst in miniaturization of integrated circuits (ICs) and crucial for global socio-economic progress. However, scaling to sub-20nm technologies is proving to be challenging as MOSFETs are reaching their fundamental limits and interconnection bottleneck is dominating IC operational power and performance. Migrating to 3-D, as a way to advance scaling, has eluded us due to inherent customization and manufacturing requirements in CMOS that are incompatible with 3-D organization. Partial attempts with die-die and layer-layer stacking have their own limitations. We propose a 3-D IC fabric technology, Skybridge[TM], which offers paradigm shift in technology scaling as well as design. We co-architect Skybridge's core aspects, from device to circuit style, connectivity, thermal management, and manufacturing pathway in a 3-D fabric-centric manner, building on a uniform 3-D template. Our extensive bottom-up simulations, accounting for detailed material system structures, manufacturing process, device, and circuit parasitics, carried through for several designs including a designed microprocessor, reveal a 30-60x density, 3.5x performance per watt benefits, and 10X reduction in interconnect lengths vs. scaled 16-nm CMOS. Fabric-level heat extraction features are shown to successfully manage IC thermal profiles in 3-D. Skybridge can provide continuous scaling of integrated circuits beyond CMOS in the 21st century.Comment: 53 Page