Uncalibrated operational amplifier-based sensor interface for capacitive/resistive sensor applications

In this paper, a new configuration of operational amplifier -based square-wave oscillator is proposed. The circuit performs an impedance-to-period (Z–T) conversion that, instead of a voltage integration typically performed by other solutions presented in the literature, is based on a voltage differentiation. This solution is suitable as first analogue uncalibrated front-end for capacitive and resistive (e.g. relative humidity and gas) sensors, working also, in the case of capacitive devices, for wide variation ranges (up to six capacitive variation decades). Moreover, through the setting of passive components, its sensitivity can be easily regulated. Experimental measurements, conducted on a prototype printed circuit board, with sample passive components and using the commercial capacitive humidity sensor Honeywell HCH-1000, have shown good linearity and accuracy in the estimation of capacitances, having a baseline or reaching a value ranging in a wide interval [picofarads–microfarads], as well as, with a lower accuracy, in the evaluation of more reduced variations of resistances, ranging from kiloohms to megaohms, also when compared with other solutions presented in the literature

Flexible and Low-cost Interface Circuit for Electrochemical and Resistive Gas Sensors

n/

A handheld high-sensitivity micro-NMR CMOS platform with B-field stabilization for multi-type biological/chemical assays

We report a micro-nuclear magnetic resonance (NMR) system compatible with multi-type biological/chemical lab-on-a-chip assays. Unified in a handheld scale (dimension: 14 x 6 x 11 cm³, weight: 1.4 kg), the system is capable to detect<100 pM of Enterococcus faecalis derived DNA from a 2.5 μL sample. The key components are a portable magnet (0.46 T, 1.25 kg) for nucleus magnetization, a system PCB for I/O interface, an FPGA for system control, a current driver for trimming the magnetic (B) field, and a silicon chip fabricated in 0.18 μm CMOS. The latter, integrated with a current-mode vertical Hall sensor and a low-noise readout circuit, facilitates closed-loop B-field stabilization (2 mT → 0.15 mT), which otherwise fluctuates with temperature or sample displacement. Together with a dynamic-B-field transceiver with a planar coil for micro-NMR assay and thermal control, the system demonstrates: 1) selective biological target pinpointing; 2) protein state analysis; and 3) solvent-polymer dynamics, suitable for healthcare, food and colloidal applications, respectively. Compared to a commercial NMR-assay product (Bruker mq-20), this platform greatly reduces the sample consumption (120x), hardware volume (175x), and weight (96x)

Wearable Intrinsically Soft, Stretchable, Flexible Devices for Memories and Computing

A recent trend in the development of high mass consumption electron devices is towards electronic textiles (e-textiles), smart wearable devices, smart clothes, and flexible or printable electronics. Intrinsically soft, stretchable, flexible, Wearable Memories and Computing devices (WMCs) bring us closer to sci-fi scenarios, where future electronic systems are totally integrated in our everyday outfits and help us in achieving a higher comfort level, interacting for us with other digital devices such as smartphones and domotics, or with analog devices, such as our brain/peripheral nervous system. WMC will enable each of us to contribute to open and big data systems as individual nodes, providing real-time information about physical and environmental parameters (including air pollution monitoring, sound and light pollution, chemical or radioactive fallout alert, network availability, and so on). Furthermore, WMC could be directly connected to human brain and enable extremely fast operation and unprecedented interface complexity, directly mapping the continuous states available to biological systems. This review focuses on recent advances in nanotechnology and materials science and pays particular attention to any result and promising technology to enable intrinsically soft, stretchable, flexible WMC

Fabrication and Characterisation of 3D Diamond Pixel Detectors With Timing Capabilities

Diamond sensors provide a promising radiation hard solution to the challenges posed by the future experiments at hadron machines. A 3D geometry with thin columnar resistive electrodes orthogonal to the diamond surface, obtained by laser nanofabrication, is expected to provide significantly better time resolution with respect to the extensively studied planar diamond sensors. We report on the development, production, and characterisation of innovative 3D diamond sensors achieving 30% improvement in both space and time resolution with respect to sensors from the previous generation. This is the first complete characterisation of the time resolution of 3D diamond sensors and combines results from tests with laser, beta rays and high energy particle beams. Plans and strategies for further improvement in the fabrication technology and readout systems are also discussed