Tag Anti-collision Algorithm for RFID Systems with Minimum Overhead Information in the Identification Process

This paper describes a new tree based anti-collision algorithm for Radio Frequency Identification (RFID) systems. The proposed technique is based on fast parallel binary splitting (FPBS) technique. It follows a new identification path through the binary tree. The main advantage of the proposed protocol is the simple dialog between the reader and tags. It needs only one bit tag response followed by one bit reader reply (one-to-one bit dialog). The one bit reader response represents the collision report (0: collision; 1: no collision) of the tags' one bit message. The tag achieves self transmission control by dynamically updating its relative replying order due to the received collision report. The proposed algorithm minimizes the overhead transmitted bits per one tag identification. In the collision state, tags do modify their next replying order in the next bit level. Performed computer simulations have shown that the collision recovery scheme is very fast and simple even with the successive reading process. Moreover, the proposed algorithm outperforms most of the recent techniques in most cases

Perfect tag identification protocol in RFID networks

Radio Frequency IDentification (RFID) systems are becoming more and more popular in the field of ubiquitous computing, in particular for objects identification. An RFID system is composed by one or more readers and a number of tags. One of the main issues in an RFID network is the fast and reliable identification of all tags in the reader range. The reader issues some queries, and tags properly answer. Then, the reader must identify the tags from such answers. This is crucial for most applications. Since the transmission medium is shared, the typical problem to be faced is a MAC-like one, i.e. to avoid or limit the number of tags transmission collisions. We propose a protocol which, under some assumptions about transmission techniques, always achieves a 100% perfomance. It is based on a proper recursive splitting of the concurrent tags sets, until all tags have been identified. The other approaches present in literature have performances of about 42% in the average at most. The counterpart is a more sophisticated hardware to be deployed in the manufacture of low cost tags.Comment: 12 pages, 1 figur

From M-ary Query to Bit Query: a new strategy for efficient large-scale RFID identification

The tag collision avoidance has been viewed as one of the most important research problems in RFID communications and bit tracking technology has been widely embedded in query tree (QT) based algorithms to tackle such challenge. Existing solutions show further opportunity to greatly improve the reading performance because collision queries and empty queries are not fully explored. In this paper, a bit query (BQ) strategy based Mary query tree protocol (BQMT) is presented, which can not only eliminate idle queries but also separate collided tags into many small subsets and make full use of the collided bits. To further optimize the reading performance, a modified dual prefixes matching (MDPM) mechanism is presented to allow multiple tags to respond in the same slot and thus significantly reduce the number of queries. Theoretical analysis and simulations are supplemented to validate the effectiveness of the proposed BQMT and MDPM, which outperform the existing QT-based algorithms. Also, the BQMT and MDPM can be combined to BQMDPM to improve the reading performance in system efficiency, total identification time, communication complexity and average energy cost

An effective frame breaking policy for dynamic framed slotted aloha in RFID

The tag collision problem is considered as one of the critical issues in RFID system. To further improve the identification efficiency of an UHF RFID system, a frame breaking policy is proposed with dynamic framed slotted aloha algorithm. Specifically, the reader makes effective use of idle, successful, and collision statistics during the early observation phase to recursively determine the optimal frame size. Then the collided tags in each slot will be resolved by individual frames. Simulation results show that the proposed algorithm achieves a better identification performance compared with the existing Aloha-based algorithms

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

Reliable Identification of RFID Tags Using Multiple Independent Reader Sessions

Radio Frequency Identification (RFID) systems are gaining momentum in various applications of logistics, inventory, etc. A generic problem in such systems is to ensure that the RFID readers can reliably read a set of RFID tags, such that the probability of missing tags stays below an acceptable value. A tag may be missing (left unread) due to errors in the communication link towards the reader e.g. due to obstacles in the radio path. The present paper proposes techniques that use multiple reader sessions, during which the system of readers obtains a running estimate of the probability to have at least one tag missing. Based on such an estimate, it is decided whether an additional reader session is required. Two methods are proposed, they rely on the statistical independence of the tag reading errors across different reader sessions, which is a plausible assumption when e.g. each reader session is executed on different readers. The first method uses statistical relationships that are valid when the reader sessions are independent. The second method is obtained by modifying an existing capture-recapture estimator. The results show that, when the reader sessions are independent, the proposed mechanisms provide a good approximation to the probability of missing tags, such that the number of reader sessions made, meets the target specification. If the assumption of independence is violated, the estimators are still useful, but they should be corrected by a margin of additional reader sessions to ensure that the target probability of missing tags is met.Comment: Presented at IEEE RFID 2009 Conferenc