3,627 research outputs found
Fly-By-Wireless for Next Generation Aircraft: Challenges and Potential solutions
âFly-By-Wirelessâ paradigm based on wireless connectivity in aircraft has the potential to improve efficiency and flexibility, while reducing weight, fuel consumption and maintenance costs. In this paper, first, the opportunities and challenges for wireless technologies in safety-critical avionics context are discussed. Then, the assessment of such technologies versus avionics requirements is provided in order to select the most appropriate one for a wireless aircraft application. As a result, the design of a Wireless Avionics Network based on Ultra WideBand technology is investigated, considering the issues of determinism, reliability and security
Security in Wireless Local Area Networks (WLANs)
Major research domains in the WLAN security include: access control & data frame protection, lightweight authentication and secure handoff. Access control standard like IEEE 802.11i provides flexibility in user authentication but on the other hand fell prey to Denial of Service (DoS) attacks. For Protecting the data communication between two communicating devicesâthree standard protocols i.e., WEP (Wired Equivalent Privacy), TKIP (Temporal Key Integrity Protocol) and AES-CCMP (Advanced Encryption StandardâCounter mode with CBC-MAC protocol) are used. Out of these, AES-CCMP protocol is secure enough and mostly used in enterprises. In WLAN environment lightweight authentication is an asset, provided it also satisfies other security properties like protecting the authentication stream or token along with securing the transmitted message. CAPWAP (Control and Provisioning of Wireless Access Points), HOKEY (Hand Over Keying) and IEEE 802.11r are major protocols for executing the secure handoff. In WLANs, handoff should not only be performed within time limits as required by the real time applications but should also be used to transfer safely the keying material for further communication. In this chapter, a comparative study of the security mechanisms under the above-mentioned research domains is provided
A survey on subjecting electronic product code and non-ID objects to IP identification
Over the last decade, both research on the Internet of Things (IoT) and
real-world IoT applications have grown exponentially. The IoT provides us with
smarter cities, intelligent homes, and generally more comfortable lives.
However, the introduction of these devices has led to several new challenges
that must be addressed. One of the critical challenges facing interacting with
IoT devices is to address billions of devices (things) around the world,
including computers, tablets, smartphones, wearable devices, sensors, and
embedded computers, and so on. This article provides a survey on subjecting
Electronic Product Code and non-ID objects to IP identification for IoT
devices, including their advantages and disadvantages thereof. Different
metrics are here proposed and used for evaluating these methods. In particular,
the main methods are evaluated in terms of their: (i) computational overhead,
(ii) scalability, (iii) adaptability, (iv) implementation cost, and (v) whether
applicable to already ID-based objects and presented in tabular format.
Finally, the article proves that this field of research will still be ongoing,
but any new technique must favorably offer the mentioned five evaluative
parameters.Comment: 112 references, 8 figures, 6 tables, Journal of Engineering Reports,
Wiley, 2020 (Open Access
H2B: Heartbeat-based Secret Key Generation Using Piezo Vibration Sensors
We present Heartbeats-2-Bits (H2B), which is a system for securely pairing
wearable devices by generating a shared secret key from the skin vibrations
caused by heartbeat. This work is motivated by potential power saving
opportunity arising from the fact that heartbeat intervals can be detected
energy-efficiently using inexpensive and power-efficient piezo sensors, which
obviates the need to employ complex heartbeat monitors such as
Electrocardiogram or Photoplethysmogram. Indeed, our experiments show that
piezo sensors can measure heartbeat intervals on many different body locations
including chest, wrist, waist, neck and ankle. Unfortunately, we also discover
that the heartbeat interval signal captured by piezo vibration sensors has low
Signal-to-Noise Ratio (SNR) because they are not designed as precision
heartbeat monitors, which becomes the key challenge for H2B. To overcome this
problem, we first apply a quantile function-based quantization method to fully
extract the useful entropy from the noisy piezo measurements. We then propose a
novel Compressive Sensing-based reconciliation method to correct the high bit
mismatch rates between the two independently generated keys caused by low SNR.
We prototype H2B using off-the-shelf piezo sensors and evaluate its performance
on a dataset collected from different body positions of 23 participants. Our
results show that H2B has an overwhelming pairing success rate of 95.6%. We
also analyze and demonstrate H2B's robustness against three types of attacks.
Finally, our power measurements show that H2B is very power-efficient
Ethernet - a survey on its fields of application
During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application fieldâs requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
Radio Frequency Fingerprinting Techniques through Preamble Modification in IEEE 802.11b
Wireless local area networks are particularly vulnerable to cyber attacks due to their contested transmission medium. Access point spoofing, route poisoning, and cryptographic attacks are some of the many mature threats faced by wireless networks. Recent work investigates physical-layer features such as received signal strength or radio frequency fingerprinting to identify and localize malicious devices. This thesis demonstrates a novel and complementary approach to exploiting physical-layer differences among wireless devices that is more energy efficient and invariant with respect to the environment than traditional fingerprinting techniques. Specifically, this methodology exploits subtle design differences among different transceiver hardware types. A software defined radio captures packets with standard-length IEEE 802.11b preambles, manipulates the recorded preambles by shortening their length, then replays the altered packets toward the transceivers under test. Wireless transceivers vary in their ability to receive packets with preambles shorter than the standard. By analyzing differences in packet reception with respect to preamble length, this methodology distinguishes amongst eight transceiver types from three manufacturers. All tests to successfully enumerate the transceivers achieve accuracy rates greater than 99%, while transmitting less than 60 test packets. This research extends previous work illustrating RF fingerprinting techniques through IEEE 802.15.4 wireless protocols. The results demonstrate that preamble manipulation is effective for multi-factor device authentication, network intrusion detection, and remote transceiver type fingerprinting in IEEE 802.11b
- âŠ