Design Methodology of Tightly Regulated Dual-Output LLC Resonant Converter Using PFM-APWM Hybrid Control Method

A dual-output LLC resonant converter using pulse frequency modulation (PFM) and asymmetrical pulse width modulation (APWM) can achieve tight output voltage regulation, high power density, and high cost-effectiveness. However, an improper resonant tank design cannot achieve tight cross regulation of the dual-output channels at the worst-case load conditions. In addition, proper magnetizing inductance is required to achieve zero voltage switching (ZVS) of the power MOSFETs in the LLC resonant converter. In this paper, voltage gain of modulation methods and steady state operations are analyzed to implement the hybrid control method. In addition, the operation of the hybrid control algorithm is analyzed to achieve tight cross regulation performance. From this analysis, the design methodology of the resonant tank and the magnetizing inductance are proposed to compensate the output error of both outputs and to achieve ZVS over the entire load range. The cross regulation performance is verified with simulation and experimental results using a 190 W prototype converter

Energy efficiency improvement of Li-ion battery packs via balancing techniques

Due to worldwide energy consumption increase, different energy strategies are growing in order to reduce fossil fuel consumption, increase renewable energy impact and increase energy efficiency. Renewable energy impact in the electric grid is increased by combination with energy storage systems. Energy storage systems storage energy during low consumption periods and insert energy during high power demand time. The efficiency and the stability of the electric grid are improved. The thesis work is focused on the energy improvement of Li-ion based energy storage systems. To improve the energy of series connected Li-ion energy storage system balancing systems are required. The thesis deals with the analysis of unbalancing processes in series connected Li-ion cells and the balancing system design to improve the Li-ion battery pack energetic behavior. The search of a low complexity active balancing system to compete against the passive balancing system is one of the most important research lines.Mundu mailako energia kontsumoa igotzen ari denez, araudi energetiko berriak sortzen ari dira erregai fosilen kontsumoa murritzeko, energia berriztagarriak ezartzeko eta efizientzia energetikoa handitzeko. Energia berriztagarrien ezartzea eta beraien erabilpena sare elektrikoan, asko hobetzen da metatze sistemen laguntzarekin. Metatze sistemek energia batzen dute kontsumo txikiko uneetan energia txertatuz sare elektrikora kontsumo handiko aldiuneetan, sare elektrikoaren efizientzia eta egonkortasuna hobetuz. Tesi lana litio ioizko metatze sistemen energia efizientzia hobetzean datza. Litio ioizko metatze sistemak litio zelden serie konekzioak dira. Seriean konektatuko sistema hauen efizientzia hobetzeko beharrezkoa da sistema orekatzaileak erabiltzea zelden artean sortutako desberdintasunak konpentsatzeko. Tesi hau zelden arteko desoreken analisian eta desoreka hauek konpentsatzeko beharrezkoak diren oreka sistemen diseinuan zentratzen da. Oreka sistema aktibo konpetitiboen diseinua, oreka sistema pasiboekin lehiatzeko da tesiaren lan inguru nagusienetakoa

Hybrid monolithic integration of high-power DC-DC converters in a high-voltage technology

The supply of electrical energy to home, commercial, and industrial users has become ubiquitous, and it is hard to imagine a world without the facilities provided by electrical energy. Despite the ever increasing efficiency of nearly every electrical application, the worldwide demand for electrical power continues to increase, since the number of users and applications more than compensates for these technological improvements. In order to maintain the affordability and feasibility of the total production, it is essential for the distribution of the produced electrical energy to be as efficient as possible. In other words the loss in the power distribution is to be minimized. By transporting electrical energy at the maximum safe voltage, the current in the conductors, and the associated conduction loss can remain as low as possible. In order to optimize the total efficiency, the high transportation voltage needs to be converted to the appropriate lower voltage as close as possible to the end user. Obviously, this conversion also needs to be as efficient, affordable, and compact as possible. Because of the ever increasing integration of electronic systems, where more and more functionality is combined in monolithically integrated circuits, the cost, the power consumption, and the size of these electronic systems can be greatly reduced. This thorough integration is not limited to the electronic systems that are the end users of the electrical energy, but can also be applied to the power conversion itself. In most modern applications, the voltage conversion is implemented as a switching DC-DC converter, in which electrical energy is temporarily stored in reactive elements, i.e. inductors or capacitors. High switching speeds are used to allow for a compact and efficient implementation. For low power levels, typically below 1 Watt, it is possible to monolithically implement the voltage conversion on an integrated circuit. In some cases, this is even done on the same integrated circuit that is the end user of the electrical energy to minimize the system dimensions. For higher power levels, it is no longer feasible to achieve the desired efficiency with monolithically integrated components, and some external components prove indispensable. Usually, the reactive components are the main limiting factor, and are the first components to be moved away from the integrated circuit for increasing power levels. The semiconductor components, including the power transistors, remain part of the integrated circuit. Using this hybrid approach, it is possible in modern converterapplications to process around 60 Watt, albeit limited to voltages of a few Volt. For hybrid integrated converters with an output voltage of tens of Volt, the power is limited to approximately 10 Watt. For even higher power levels, the integrated power transistors also become a limiting factor, and are replaced with discrete power devices. In these discrete converters, greatly increased power levels become possible, although the system size rapidly increases. In this work, the limits of the hybrid approach are explored when using so-called smart-power technologies. Smart-power technologies are standard lowcost submicron CMOS technologies that are complemented with a number of integrated high-voltage devices. By using an appropriate combination of smart-power technologies and circuit topologies, it is possible to improve on the current state-of-the-art converters, by optimizing the size, the cost, and the efficiency. To determine the limits of smart-power DC-DC converters, we first discuss the major contributing factors for an efficient energy distribution, and take a look at the role of voltage conversion in the energy distribution. Considering the limitations of the technologies and the potential application areas, we define two test-cases in the telecommunications sector for which we want to optimize the hybrid monolithic integration in a smart-power technology. Subsequently, we explore the specifications of an ideal converter, and the relevant properties of the affordable smart-power technologies for the implementation of DC-DC converters. Taking into account the limitations of these technologies, we define a cost function that allows to systematically evaluate the different potential converter topologies, without having to perform a full design cycle for each topology. From this cost function, we notice that the de facto default topology selection in discrete converters, which is typically based on output power, is not optimal for converters with integrated power transistors. Based on the cost function and the boundary conditions of our test-cases, we determine the optimal topology for a smart-power implementation of these applications. Then, we take another step towards the real world and evaluate the influence of parasitic elements in a smart-power implementation of switching converters. It is noticed that the voltage overshoot caused by the transformer secondary side leakage inductance is a major roadblock for an efficient implementation. Since the usual approach to this voltage overshoot in discrete converters is not applicable in smart-power converters due to technological limitations, an alternative approach is shown and implemented. The energy from the voltage overshoot is absorbed and transferred to the output of the converter. This allows for a significant reduction in the voltage overshoot, while maintaining a high efficiency, leading to an efficient, compact, and low-cost implementation. The effectiveness of this approach was tested and demonstrated in both a version using a commercially available integrated circuit, and our own implementation in a smart-power integrated circuit. Finally, we also take a look at the optimization of switching converters over the load range by exploiting the capabilities of highly integrated converters. Although the maximum output power remains one of the defining characteristics of converters, it has been shown that most converters spend a majority of their lifetime delivering significantly lower output power. Therefore, it is also desirable to optimize the efficiency of the converter at reduced output current and output power. By splitting the power transistors in multiple independent segments, which are turned on or off in function of the current, the efficiency at low currents can be significantly improved, without introducing undesirable frequency components in the output voltage, and without harming the efficiency at higher currents. These properties allow a near universal application of the optimization technique in hybrid monolithic DC-DC converter applications, without significant impact on the complexity and the cost of the system. This approach for the optimization of switching converters over the load range was demonstrated using a boost converter with discrete power transistors. The demonstration of our smart-power implementation was limited to simulations due to an issue with a digital control block. On a finishing note, we formulate the general conclusions and provide an outlook on potential future work based on this research

Programmable Topology Derivation and Analysis of Integrated Three-Port DC-DC Converters with Reduced Switches for Low-Cost Applications

© 1982-2012 IEEE. Thanks to the favorable advantage of low cost, integrated three-port dc-dc converters with reduced switches have attracted extensive attention. In order to provide more new topologies, this paper aims to propose a programmable topology derivation method, which effectively simplifies the cumbersome process of the conventional combination method. Instead of the manual connection and examination, the proposed alternative can quickly and rigorously derive multiple viable integrated three-port dc-dc topologies from a great number of possible connections with the aid of computer program. Besides, generalized analysis is also accomplished, with which performance characteristics of all derived converters are simultaneously obtained and then a comprehensive comparison can be easily conducted to select a preferred one for the practical application. Finally, an example-specific application with one input and two outputs is given, with topology selection, design, and experimental results demonstrated in detail

Chemical And Biological Treatment Of Mature Landfill Leachate

The challenges imposed on Voltage Regulator Modules (VRM) become difficult to be achieved with the conventional multiphase buck converter commonly used on PC motherboards. For faster data transfer, a decrease in the output voltage is needed. This decrease causes small duty cycle that is accompanied by critical problems which impairs the efficiency. Therefore, these problems need to be addressed. Transformer-based non-isolated topologies are not new approaches to extend the duty cycle and avoid the associated drawbacks. High leakage, several added components and complicated driving and control schemes are some of the trade-offs to expand the duty cycle. The objective of this work is to present a new dc-dc buck-based topology, which extends the duty cycle with minimum drawbacks by adding two transformers that can be integrated to decrease the size and two switches with zero voltage switching (ZVS). Another issue addressed in this thesis is deriving a small signal model for a two-input two-phase buck converter as an introduction to a new evolving field of multi-input converters

Copper loss analysis of a multiwinding high-frequency transformer for a magnetically-coupled residential microgrid

© 2018 IEEE. Improvements in characteristics of magnetic materials and switching devices have provided the feasibility of replacing the electrical buses with high-frequency magnetic links in small-scale microgrids. This can effectively reduce the number of voltage conversion stages, size, and cost of the microgrid, and isolate the sources and loads. To optimally design the magnetic link, an accurate evaluation of copper loss of the windings considering both the current waveforms and parasitic effects are required. This paper studies the copper loss analysis of a three-winding high-frequency magnetic link for residential microgrid applications. Due to the nonsinusoidal nature of the voltages and currents, the loss analysis is carried out on a harmonic basis taking into account the variations of phase shift, duty ratio, and amplitude of the waveforms. The high-frequency parasitic phenomena including the skin and proximity effects are taken into account. The maximum and minimum copper loss operating conditions of the magnetic link and their dependency on the phase shift angle and the duty ratio of the connected waveforms are studied. A prototype of the microgrid including the magnetic link is developed to validate the theoretical analysis, evaluate the microgrid efficiency, and perform the loss breakdown