1,068 research outputs found
QUALITY OF SERVICE ARCHITECTURES APPLICABILITY IN AN INTRANET NETWORK
The quality of service (QoS) concept, which appeared initially as a necessity to improve Internet users perception, deals actually with new valences along with information society maturation. At the organisation’s level, the Intranet network shall assure in a similar manner as the Internet all kinds of services, which are useful to the organisation’s users. Starting from the traditional QoS architectural models, network administrators shall plan and design a QoS architecture, which will map on the organisation’s requirements, having at disposal not only own network elements but also communication services provided by other operators. The aim of this paper is to present, starting from the general QoS models, a comparative study of main advantages and drawbacks in implementing a specific Intranet QoS architecture taking into consideration all kind of aspects (material, financial, human resources), which impact on a good Intranet QoS management.QoS, IntServ, DiffServ, IntServ over DiffServ, VPN-MPLS, Intranet network
Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure
This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version
Quality of Service over Specific Link Layers: state of the art report
The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service
Pre-Congestion Notification (PCN) Architecture
This document describes a general architecture for flow admission and termination based on pre-congestion information in order to protect the quality of service of established, inelastic flows within a single Diffserv domain.\u
Traffic Engineering with Segment Routing: SDN-based Architectural Design and Open Source Implementation
Traffic Engineering (TE) in IP carrier networks is one of the functions that
can benefit from the Software Defined Networking paradigm. By logically
centralizing the control of the network, it is possible to "program" per-flow
routing based on TE goals. Traditional per-flow routing requires a direct
interaction between the SDN controller and each node that is involved in the
traffic paths. Depending on the granularity and on the temporal properties of
the flows, this can lead to scalability issues for the amount of routing state
that needs to be maintained in core network nodes and for the required
configuration traffic. On the other hand, Segment Routing (SR) is an emerging
approach to routing that may simplify the route enforcement delegating all the
configuration and per-flow state at the border of the network. In this work we
propose an architecture that integrates the SDN paradigm with SR-based TE, for
which we have provided an open source reference implementation. We have
designed and implemented a simple TE/SR heuristic for flow allocation and we
show and discuss experimental results.Comment: Extended version of poster paper accepted for EWSDN 2015 (version v4
- December 2015
A Survey on the Contributions of Software-Defined Networking to Traffic Engineering
Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567
Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-
A Survey of Network Optimization Techniques for Traffic Engineering
TCP/IP represents the reference standard for the implementation of interoperable communication networks. Nevertheless, the layering principle at the basis of interoperability severely limits the performance of data communication networks, thus requiring proper configuration and management in order to provide effective management of traffic flows. This paper presents a brief survey related to network optimization using Traffic Engineering algorithms, aiming at providing additional insight to the different alternatives available in the scientific literature
Traffic Engineering in G-MPLS networks with QoS guarantees
In this paper a new Traffic Engineering (TE) scheme to efficiently route sub-wavelength requests with different QoS requirements is proposed for G-MPLS networks. In most previous studies on TE based on dynamic traffic grooming, the objectives were to minimize the rejection probability by respecting the constraints of the optical node architecture, but without considering service differentiation. In practice, some high-priority (HP) connections can instead be characterized by specific constraints on the maximum tolerable end-to-end delay and packet-loss ratio. The proposed solution consists of a distributed two-stage scheme: each time a new request arrives, an on-line dynamic grooming scheme finds a route which fulfills the QoS requirements. If a HP request is blocked at the ingress router, a preemption algorithm is executed locally in order to create room for this traffic. The proposed preemption mechanism minimizes the network disruption, both in term of number of rerouted low-priority connections and new set-up lightpaths, and the signaling complexity. Extensive simulation experiments are performed to demonstrate the efficiency of our scheme
Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results
Fixed and mobile telecom operators, enterprise network operators and cloud
providers strive to face the challenging demands coming from the evolution of
IP networks (e.g. huge bandwidth requirements, integration of billions of
devices and millions of services in the cloud). Proposed in the early 2010s,
Segment Routing (SR) architecture helps face these challenging demands, and it
is currently being adopted and deployed. SR architecture is based on the
concept of source routing and has interesting scalability properties, as it
dramatically reduces the amount of state information to be configured in the
core nodes to support complex services. SR architecture was first implemented
with the MPLS dataplane and then, quite recently, with the IPv6 dataplane
(SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering
of packets across nodes to a general network programming approach, making it
very suitable for use cases such as Service Function Chaining and Network
Function Virtualization. In this paper we present a tutorial and a
comprehensive survey on SR technology, analyzing standardization efforts,
patents, research activities and implementation results. We start with an
introduction on the motivations for Segment Routing and an overview of its
evolution and standardization. Then, we provide a tutorial on Segment Routing
technology, with a focus on the novel SRv6 solution. We discuss the
standardization efforts and the patents providing details on the most important
documents and mentioning other ongoing activities. We then thoroughly analyze
research activities according to a taxonomy. We have identified 8 main
categories during our analysis of the current state of play: Monitoring,
Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path
Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL
- …