Performance analysis of a proposed hybrid optical network

This dissertation discusses a novel Hybrid Optical Network (HON) that can provide service differentiation based on traffic characteristics (i.e., packet, burst, and long-lived flow) with QoS guarantee not only in network layer, but also in physical layer. The DHON consists of sophisticated edge-nodes, which can classify, monitor, and dynamically adjust optical channels in the core layer as traffic variation. The edge nodes aggregate traffic, identifying end-to-end delay by ingress queuing delay or burst timeout. The network can estimate number of channels by arriving traffic intensity and distribution with estimated upper-bound delay. The core layer employs two parallel optical switches (OCS, OBS) in the same platform. Thanks to the overflow system, the proposed network enhances utilization with fewer long distance premium channels. The premium channel can quickly handle burst traffic without new channel assignment. With less overprovisioning capacity design, the premium channel enhances utilization and decrease number of costly premium channels. This research also proposes mathematic models to represent particular DHON channels (i.e., circuit, packet, and burst). We employ method of moments based on overflow theory to forecast irregular traffic pattern from circuit-based channel (i.e., M/M/c/c) to overflow channel, in which G/G/1 model based on Ph/Ph/1 matrix can represent the overflow channel. Moreover, secondary channel supports packet-based traffic over wavelength channel with two service classes: Class I based on delay sensitive traffic (i.e., long flow) and Class II for non-delay sensitive traffic (e.g., best effort). In addition, mixture of traffic in the wavelength channels is investigated based on M/G/1 and M/G/2 with specific service time distribution for particular class. Finally, we show our DHON based on (O-O-O) switching paradigm has improved the performance over typical (O-E-O) switching network architecture based on NSF topology

On the Merits of Deploying TDM-based Next-Generation PON Solutions in the Access Arena As Multiservice, All Packet-Based 4G Mobile Backhaul RAN Architecture

The phenomenal growth of mobile backhaul capacity required to support the emerging fourth-generation (4G) traffic including mobile WiMAX, cellular Long-Term Evolution (LTE), and LTE-Advanced (LTE-A) requires rapid migration from today\u27s legacy circuit switched T1/E1 wireline and microwave backhaul technologies to a new fiber-supported, all-packet-based mobile backhaul infrastructure. Clearly, a cost effective fiber supported all-packet-based mobile backhaul radio access network (RAN) architecture that is compatible with these inherently distributed 4G RAN architectures is needed to efficiently scale current mobile backhaul networks. However, deploying a green fiber-based mobile backhaul infrastructure is a costly proposition mainly due to the significant cost associated with digging the trenches in which the fiber is to be laid. These, along with the inevitable trend towards all-IP/Ethernet transport protocols and packet switched networks, have prompted many carriers around the world to consider the potential of utilizing the existing fiber-based Passive Optical Network (PON) access infrastructure as an all-packet-based converged fixed-mobile optical access networking transport architecture to backhaul both mobile and typical wireline traffic. Passive Optical Network (PON)-based fiber-to-the-curb/home (FTTC/FTTH) access networks are being deployed around the globe based on two Time-Division Multiplexed (TDM) standards: ITU G.984 Gigabit PON (GPON) and IEEE 802.ah Ethernet PON (EPON). A PON connects a group of Optical Network Units (ONUs) located at the subscriber premises to an Optical Line Terminal (OLT) located at the service provider\u27s facility. It is the purpose of this thesis to examine the technological requirements and assess the performance analysis and feasibility for deploying TDM-based next-generation (NG) PON solutions in the access arena as multiservice, all packet-based 4G mobile backhaul RAN and/or converged fixed-mobile optical networking architecture. Specifically, this work proposes and devises a simple and cost-effective 10G-EPON-based 4G mobile backhaul RAN architecture that efficiently transports and supports a wide range of existing and emerging fixed-mobile advanced multimedia applications and services along with the diverse quality of service (QoS), rate, and reliability requirements set by these services. The techno-economics merits of utilizing PON-based 4G RAN architecture versus that of traditional 4G (mobile WiMAX and LTE) RAN will be thoroughly examine and quantified. To achieve our objective, we utilize the existing fiber-based PON access infrastructure with novel ring-based distribution access network and wireless-enabled OLT and ONUs as the multiservice packet-based 4G mobile backhaul RAN infrastructure. Specifically, to simplify the implementation of such a complex undertaking, this work is divided into two sequential phases. In the first phase, we examine and quantify the overall performance of the standalone ring-based 10G-EPON architecture (just the wireline part without overlaying/incorporating the wireless part (4G RAN)) via modeling and simulations. We then assemble the basic building blocks, components, and sub-systems required to build up a proof-of-concept prototype testbed for the standalone ring-based EPON architecture. The testbed will be used to verify and demonstrate the performance of the standalone architecture, specifically, in terms of power budget, scalability, and reach. In the second phase, we develop an integrated framework for the efficient interworking between the two wireline PON and 4G mobile access technologies, particularly, in terms of unified network control and management (NCM) operations. Specifically, we address the key technical challenges associated with tailoring a typically centralized PON-based access architecture to interwork with and support a distributed 4G RAN architecture and associated radio NCM operations. This is achieved via introducing and developing several salient-networking innovations that collectively enable the standalone EPON architecture to support a fully distributed 4G mobile backhaul RAN and/or a truly unified NG-PON-4G access networking architecture. These include a fully distributed control plane that enables intercommunication among the access nodes (ONUs/BSs) as well as signaling, scheduling algorithms, and handoff procedures that operate in a distributed manner. Overall, the proposed NG-PON architecture constitutes a complete networking paradigm shift from the typically centralized PON\u27s architecture and OLT-based NCM operations to a new disruptive fully distributed PON\u27s architecture and NCM operations in which all the typically centralized OLT-based PON\u27s NCM operations are migrated to and independently implemented by the access nodes (ONUs) in a distributed manner. This requires migrating most of the typically centralized wireline and radio control and user-plane functionalities such as dynamic bandwidth allocation (DBA), queue management and packet scheduling, handover control, radio resource management, admission control, etc., typically implemented in today\u27s OLT/RNC, to the access nodes (ONUs/4G BSs). It is shown that the overall performance of the proposed EPON-based 4G backhaul including both the RAN and Mobile Packet Core (MPC) {Evolved Packet Core (EPC) per 3GPP LTE\u27s standard} is significantly augmented compared to that of the typical 4G RAN, specifically, in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. Furthermore, the proposed architecture enables redistributing some of the intelligence and NCM operations currently centralized in the MPC platform out into the access nodes of the mobile RAN. Specifically, as this work will show, it enables offloading sizable fraction of the mobile signaling as well as actual local upstream traffic transport and processing (LTE bearers switch/set-up, retain, and tear-down and associated signaling commands from the BSs to the EPC and vice-versa) from the EPC to the access nodes (ONUs/BSs). This has a significant impact on the performance of the EPC. First, it frees up a sizable fraction of the badly needed network resources as well as processing on the overloaded centralized serving nodes (AGW) in the MPC. Second, it frees up capacity and sessions on the typically congested mobile backhaul from the BSs to the EPC and vice-versa

Wavelength assignment in optical burst switching networks using neuro-dynamic programming

Cataloged from PDF version of article.All-optical networks are the most promising architecture for building large-size, hugebandwidth transport networks that are required for carrying the exponentially increasing Internet traffic. Among the existing switching paradigms in the literature, the optical burst switching is intended to leverage the attractive properties of optical communications, and at the same time, take into account its limitations. One of the major problems in optical burst switching is high blocking probability that results from one-way reservation protocol used. In this thesis, this problem is solved in wavelength domain by using smart wavelength assignment algorithms. Two heuristic wavelength assignment algorithms prioritizing available wavelengths according to reservation tables at the network nodes are proposed. The major contribution of the thesis is the formulation of the wavelength assignment problem as a continuous-time, average cost dynamic programming problem and its solution based on neuro-dynamic programming. Experiments are done over various traffic loads, burst lengths, and number of wavelength converters with a pool structure. The simulation results show that the wavelength assignment algorithms proposed for optical burst switching networks in the thesis perform better than the wavelength assignment algorithms in the literature that are developed for circuit-switched optical networks.Keçeli, FeyzaM.S

Resource management research in ethernet passive optical networks

The last decades, we have witnessed different phenomenology in the telecommunications sector. One of them is the widespread use of the Internet, which has brought a sharp increase in traffic, forcing suppliers to continuously expand the capacity of networks. In the near future, Internet will be composed of long-range highspeed optical networks; a number of wireless networks at the edge; and, in between, several access technologies. Today one of the main problems of the Internet is the bottleneck in the access segment. To address this issue the Passive Optical Networks (PONs) are very likely to succeed, due to their simplicity, low-cost, and increased bandwidth. A PON is made up of fiber optic cabling and passive splitters and couplers that distribute an optical signal to connectors that terminate each fiber segment. Among the different PON technologies, the Ethernet-PON (EPON) is a great alternative to satisfy operator and user needs, due to its cost, flexibility and interoperability with other technologies. One of the most interesting challenges in such technologies relates to the scheduling and allocation of resources in the upstream (shared) channel, i.e., the resource management. The aim of this thesis is to study and evaluate current contributions and propose new efficient solutions to address the resource management issues mainly in EPON. Key issues in this context are future end-user needs, quality of service (QoS) support, energy-saving and optimized service provisioning for real-time and elastic flows. This thesis also identifies research opportunities, issue recommendations and proposes novel mechanisms associated with access networks based on optical fiber technologies.Postprint (published version

Design and analysis of a 3-dimensional cluster multicomputer architecture using optical interconnection for petaFLOP computing

In this dissertation, the design and analyses of an extremely scalable distributed multicomputer architecture, using optical interconnects, that has the potential to deliver in the order of petaFLOP performance is presented in detail. The design takes advantage of optical technologies, harnessing the features inherent in optics, to produce a 3D stack that implements efficiently a large, fully connected system of nodes forming a true 3D architecture. To adopt optics in large-scale multiprocessor cluster systems, efficient routing and scheduling techniques are needed. To this end, novel self-routing strategies for all-optical packet switched networks and on-line scheduling methods that can result in collision free communication and achieve real time operation in high-speed multiprocessor systems are proposed. The system is designed to allow failed/faulty nodes to stay in place without appreciable performance degradation. The approach is to develop a dynamic communication environment that will be able to effectively adapt and evolve with a high density of missing units or nodes. A joint CPU/bandwidth controller that maximizes the resource allocation in this dynamic computing environment is introduced with an objective to optimize the distributed cluster architecture, preventing performance/system degradation in the presence of failed/faulty nodes. A thorough analysis, feasibility study and description of the characteristics of a 3-Dimensional multicomputer system capable of achieving 100 teraFLOP performance is discussed in detail. Included in this dissertation is throughput analysis of the routing schemes, using methods from discrete-time queuing systems and computer simulation results for the different proposed algorithms. A prototype of the 3D architecture proposed is built and a test bed developed to obtain experimental results to further prove the feasibility of the design, validate initial assumptions, algorithms, simulations and the optimized distributed resource allocation scheme. Finally, as a prelude to further research, an efficient data routing strategy for highly scalable distributed mobile multiprocessor networks is introduced

Design and protection algorithms for path level aggregation of traffic in WDM metro optical networks

Wavelength Division Multiplexing (WDM) promises to offer a cost effective and scalable solution to meet the emerging demands of the Internet. WDM splits the tremendous bandwidth latent in a fiber into multiple non-overlapping wavelength channels, each of which can be operated at the peak electronic rate. Commercial systems with 128 wavelengths and transmission rates of up to 40 Gbps per wavelength have been made possible using state of the art optical technologies to deal with physical impairments. Systems with higher capacities are likely to evolve in the future. The end user requirements for bandwidth, on the other hand, have been ranging from 155 Mbps to 2.5 Gbps. Dedicating a wavelength for each end user will lead to severe underutilization of WDM channels. This brings to forefront the requirement for sharing of bandwidth in a wavelength among multiple end users.;The concept of wavelength sharing among multiple clients is called grooming. Grooming can be done purely at the optical layer (optical grooming) or it can be done with support from the client layer (electronic grooming). The advantage of all optical grooming is the ease of scalability due to its transparency as opposed to electronic grooming which is constrained by electronic bottlenecks. Efforts towards enhancing optical grooming is pursued through increasing optical switching speeds. However, technologies to make optical switches with high speeds, large port counts and low insertion losses have been elusive and may continue to remain so in the near future.;Recently, there have been some research into designing new architectures and protocols focused on optical grooming without resorting to fast optical switching. Typically, this is achieved in three steps: (1) configure the circuit in the form of a path or a tree; (2) use optical devices like couplers or splitters to allow multiple transmitters and/or receivers to share the same circuit; and (3) provide an arbitration mechanism to avoid contention among end users of the circuit. This transparent sharing of the wavelength channel utilizes the network resources better than the conventional low-speed circuit switched approaches. Consequently, it becomes important to quantify the improvement in achieved performance and evaluate if the reaped benefits justify the cost of the required additional hardware and software.;The contribution of this thesis is two fold: (1) developing a new architecture called light-trails as an IP based solution for next generation WDM optical networks, and (2) designing a unified framework to model Path Level Aggregation of Traffic in metrO Optical Networks (PLATOONs). The algorithms suggested here have three features: (1) accounts for four different path level aggregation strategies---namely, point to point (for example, lightpaths), point to multi-point (for example, source based light-trails), multi-point to point (for example, destination based light-trails) and multi-point to multi-point (for example, light-trails); (2) incorporates heterogenous switching architectures; and (3) accommodates multi-rate traffic. Algorithms for network design and survivability are developed for PLATOONs in the presence of both static and dynamic traffic. Connection level dedicated/shared, segregated/mixed protection schemes are formulated for single link failures in the presence of static and dynamic traffic. A simple medium access control protocol that avoids collisions when the channel is shared by multiple clients is also proposed.;Based on extensive simulations, we conclude that, for the studied scenarios, (1) when client layer has no electronic grooming capabilities, light-trails (employing multi-point to multi-point aggregation strategy) perform several orders of magnitude better than lightpaths and (2) when client layer has full electronic grooming capabilities, source based light-trails (employing point to multi-point aggregation strategy) perform the best in wavelength limited scenarios and lightpaths perform the best in transceiver limited scenarios.;The algorithms that are developed here will be helpful in designing optical networks that deploy path level aggregation strategies. The proposed ideas will impact the design of transparent, high-speed all-optical networks.</p

OPEN PON: Seamless integration between 5G core and optical access networks

Nowadays business and users traffic demands are getting higher and higher, leaving optical fiber as the only reliable solution to meet its demands, and in access networks the dominating technology is Passive Optical Networks (PONs) where currently exists two main families of standards, the GPON (ITU-T standard) and the EPON (IEEE standard). In this work we tackle the latest version oof the GPON family, the NG-PON2. We analyse the Physical Media Dependent (PMD) and Transmission Convergence (TC) layer requirements and what is standardized in each one. We also have a look into the SDN paradigm, which decouples the control and data plane of network equipment concentrating the intellegence and complexity in a centralized controller, the OpenFlow protocol that is one of the main enablers of SDN, since it is the communication protocol betwwen the network devices and the SDN controller, and the SIEPON (IEEE 1904.1) standard which gives interoperability of the transport, service, and control planes in a multi-vendor environment. The introduction of the SDN paradigm in the xPON world is a hot research topic because it would add the total controllability of the PON infrastructure, and the coordination with the SDN-based control plane of the core networks. It would allow a centralized optimization of the different resources managed by the OLTs and a seamless coordination between OLTs and the core network. In the TC layer specifications, of NG-PON2, it is not standardized the bandwidth allocation of the system, we set ourselves to create a simple Dynamic Bandwidth Allocation (DBA) algorithm that would optimize the use of channels and wavelengths. Taking into account the NG-PON2 technology and all its features, the emerging trend to extend SDN to the optical access networks, the multi-vendor adaptation provided by the SIEPON stantdard, and the need to have a platform to develop and test DBA scheduling algorithms made that thecreation and deployment of a fully SIEPON-SDN-NG-PON2 emulation environment became the main goal of this work. To create this environment we employed the use of MikroTiks, where OpenWRT was installed as well as a set of packages that menabled the behaviour of a CPqD switch (or ofsoftswitch13), and the use of Raspberry Pis which maintained its original OS and only required the installation of a sepecific set of tools. The results obtained were quite positive confirming the possibility of not only creating but also testing different DBA scheduling algorithms in the deployed environment and matching the results expected to our created algorithm

Optical-WiMAX Hybrid Networks

The emergence of bandwidth-intensive Internet services, such ascircuit-quality voice transfer and interactive video gaming, createa high demand for a very qualified next-generation access network.In addition to high bandwidth, these future access networks shouldalso provide improved network availability, flexibility, mobility,reliability, failure protection, quality of service (QoS) supportand cost-effective access. The integration between optical networksand Worldwide Interoperability for Microwave Access (WiMAX) is apromising solution for future access networks. Accordingly, a fewdifferent architectures and MAC protocol components have recentlybeen proposed for the integration between the Ethernet PassiveOptical Network (EPON) and WiMAX. However, the proposedarchitectures contain several drawbacks. Moreover, the EPON-WiMAXhybrid does not yet contain a comprehensive Medium Access Control(MAC) protocol and a mechanism for Quality of Service (QoS) support.Finally, this work introduces the Resilient Packet Ring (RPR)standard, which aims to build high-performance metro edge and metrocore ring networks that interconnect multiple access networks. Theobjective of this thesis is to examine the integration of opticalstandards, such as RPR and EPON, with the WiMAX standard.Subsequently, this integration will be applied to the areas ofarchitecture and MAC Protocol as a promising solution for not onlyaccess networks but also for metro networks.The first part of the thesis examines the EPON-WiMAX integration asa solution for the access network. Specifically, the proposedsolution includes new EPON-WiMAX hybrid network architectures thatare suitable for both urban and rural environment requirements, andit also introduces a joint MAC protocol for these architectures. Theproposed architectures are reliable and provide extended networkcoverage; in particular, reliability is achieved by applying aprotection scheme to the most critical portion of the EPON part ofthe architecture. Additionally, the network coverage of thearchitecture is extended by inserting an intermediate networkbetween the front end and the backhaul network of the traditionalEPON-WiMAX architecture. Subsequently, we propose a comprehensivejoint MAC protocol for the proposed EPON-WiMAX architecture; thisprotocol provides a per-stream quality-of-service guarantee andimproves the network utilization. Also, the proposed joint MACprotocol includes an admission controller, a scheduler and abandwidth allocator.While the first part of the thesis strives to improve the hybridnetwork reliability through protection in the EPON part and extendthe network coverage through innovative methods, the second partattempts to maintain and enhance these objectives by adding areliable technology to the integrated network. Specifically, thissection examines the way in which the RPR network can be integratedwith the proposed EPON-WiMAX architecture to form an RPR-EPON-WiMAXhybrid network, which can be a solution for both access and metronetworks. The proposed architecture is reliable due to thedependability of the RPR standard and the protection mechanismemployed in the EPON network. Moreover, the architecture contains ahigh fault tolerance against node and connection failure. In thesecond part, the joint MAC protocol for the RPR-EPON-WiMAX hybridnetwork includes a multi-level dynamic bandwidth allocationalgorithm, a distributed admission control, a scheduler, and arouting algorithm. This MAC protocol aims to maximize the advantagesof the proposed architecture by distributing its functionalitiesover the parts of the architecture and jointly executing the partsof the MAC protocol

The Design of a single chip 8x8 ATM switch in 0.5 micrometers CMOS VLSI

This thesis illustrates the design of a single chip Asynchronous Transfer Mode (ATM) protocol switch using Very Large Scale Integration (VLSI). The ATM protocol is the data communications protocol used in the implementation of the Broadband Integrated Services Digital Network (B-ISDN), A number of switch architecture are first studied and a new architecture is developed based on optimizing performance and practicality of implementation in VLSI. A fully interconnected switch architecture is implemented by permanently connecting every input port to all the output ports. An output buffering scheme is used to handle cells that cannot be routed right away. This new architecture is caned the High Performance (HiPer) Switch Architecture. The performance of the architecture is simulated using a C++ model. Simulation results for a randomly distributed traffic pattern with a 90% probability of cells arriving in a time slot produces a Cell Loss Ratio of 1.Ox 10^-8 with output buffers that can hold 64 cells. The device is then modeled in VHDL to verify its functionality. Finally the layout of an 8x8 switch is produced using a 0.5 micrometer CMOS VLSI process and simulations of that circuit show that a peak throughput of 200 Mbps per output port can be achieve