Parameter identification and model based control of direct drive robots

Imperial Users onl

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview

Disturbance Observer has been one of the most widely used robust control tools since it was proposed in 1983. This paper introduces the origins of Disturbance Observer and presents a survey of the major results on Disturbance Observer-based robust control in the last thirty-five years. Furthermore, it explains the analysis and synthesis techniques of Disturbance Observer-based robust control for linear and nonlinear systems by using a unified framework. In the last section, this paper presents concluding remarks on Disturbance Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure

Естимација крутости и адаптивно управљање код попустљивих робота

Although there has been an astonishing increase in the development of nature- inspired robots equipped with compliant features,i.e.soft robots, their full potential has not been exploited yet. One aspect is that the soft robotics research has mainly focused on their position control only, whilest iffness is managed in open loop. Moreover, due to the difficulties of achieving consistent production of the actuation systems for soft articulated robots and the time-varyingnatureoftheirinternalflexibleelements,whicharesubjecttoplasticdeformation overtime,itiscurrentlyachallengetopreciselydeterminethejointstiffness. . In this regard, the thesis puts an emphasis on stiffness estimation and adaptive control for soft articulated robots driven by antagonistic Variable Stiffness Actuators (VSAs) with the aim to impose the desired dynamics of both position and stiffness, which would finally contribute to the overall safety and improved performance of a soft robot. By building upon Unknown Input Observer (UIO) theory, invasive and non-invasive solutions for estimation of stiffness in pneumatic and electro-mechanical actuators are proposed and in the latter case also experimentally validated. Beyond the linearity and scalability advantage, the approaches have an appealing feature that torque and velocity sensors are not needed. Once the stiffness is determined, innovative control approaches are introduced for soft articulated robots comprising an adaptive compensator and a dynamic decoupler. The solutions are able to cope with uncertainties of the robot dynamic model and, when the desired stiffness is constant or slowly-varying, also of the pneumatic actuator. Their verification is performed via simulations and then the pneumatic one is successfully tested on an experimental setup. Finally, the thesis shows via extensive simulations the effectiveness of adaptive technique ap- plied to soft-bodied robots, previously deriving the sufficient and necessary conditions for the controller convergence.Iako se danas izuzetno intenzivno radi na razvoju robota inspirisanih prirodom koje odlikuje elastična struktura, njihov puni potencijal jox uvek nije iskorišćen. Sa jedne strane, istraživanja u oblasti popustljivih robota su uglavnom fokusirana samo na upravljanje njihovom pozicijom, dok se krutost reguliše u otvorenoj sprezi. Pored toga, zbog poteškoća u postiznju konzistentne proizvodnje aktuatora i promenljive prirode njihovih elastičnih elemenata, koji su vremenom podlo_ni plastičnoj deformaciji, trenutno je izazov precizno odrediti krutost zglobova robota. U cilju doprinosa poboljšanja_u performansi i bezbednosti rada popustivih robota, teza prikazuje doprinos proceni krutosti i adaptivnog simultanog upravljanja pozicijom i krutosti antagonističkih aktuatora promenljive krutosti (VSA). Oslanjajući se na teoriju opservera nepoznatih ulaza (UIO), predložena su invazivna i neinvazivna rešenja za procenu krutosti u pneumatskim i elektromehaničkim aktuatorima i eksperimentalno verifikovana u slučaju druge grupe aktuatora. Pored linearnosti i skalabilnosti, ovi pristupi imaju privlaqnu osobinu da senzori momenta i brzine nisu potrebni. Teza predla_e inovativne sisteme upravljanja koji poseduju adaptivni kompenzator i dinamički dekupler. Predložene metode upravljanja demonstriraju mogućnost da kompenzuju nesigurnosti dinamičkog modela robota bez obzira da li je on pogođen električnim ili pneumatskim aktuatorima. Nakon simulacija, razvijeno upravljanje je verifikovano i na pneumatskom robotu. Na kraju teze, obimne simulacije pokazuju efikasnost adaptivne tehnike kada se primeni na robote sa fleksibilnim linkovima, prethodno izvodeći dovoljne i potrebne uslove za konvergenciju kontrolera

High-performance series elastic actuation

textMobile legged robots have the potential to restructure many aspects of our lives in the near future. Whether for applications in household care, entertainment, or disaster response, these systems depend on high-performance actuators to improve their basic capabilities. The work presented here focuses on developing new high-performance actuators, specifically series elastic actuators, to address this need. We adopt a system-wide optimization approach, dealing with factors which influence performance at the levels of mechanical design, electrical system design, and control. Using this approach and based on a set of performance metrics, we produce an actuator, the UT-SEA, which achieves leading empirical results in terms of power-to-weight, force control, size, and system efficiency. We also develop general high-performance control techniques for both force- and position-controlled actuators, some of which were adopted for use on NASA-JSC's Valkyrie Humanoid robot and were used during DARPA's DRC Trials 2013 robotics competition.Electrical and Computer Engineerin

Open motion control architecture for humanoid robots

This Ph.D. thesis contributes to the development of control architecture for robots. It provides a complex study of a control systems design and makes a proposal for generalized open motion control architecture for humanoid robots. Generally speaking, the development of humanoid robots is a very complex engineering and scientific task that requires new approaches in mechanical design, electronics, software engineering and control. First of all, taking into account all these considerations, this thesis tries to answer the question of why we need the development of such robots. Further, it provides a study of the evolution of humanoid robots, as well as an analysis of modern trends. A complex study of motion, that for humanoid robots, means first of all the biped locomotion is addressed. Requirements for the design of open motion control architecture are posed. This work stresses the motion control algorithms for humanoid robots. The implementation of only servo control for some types of robots (especially for walking systems) is not sufficient. Even having stable motion pattern and well tuned joint control, a humanoid robot can fall down while walking. Therefore, these robots need the implementation of another, upper control loop which will provide the stabilization of their motion. This Ph.D. thesis proposes the study of a joint motion control problem and a new solution to walking stability problem for humanoids. A new original walking stabilization controller based on decoupled double inverted pendulum dynamical model is developed. This Ph.D. thesis proposes novel motion control software and hardware architecture for humanoid robots. The main advantage of this architecture is that it was designed by an open systems approach allowing the development of high-quality humanoid robotics platforms that are technologically up-to-date. The Rh-1 prototype of the humanoid robot was constructed and used as a test platform for implementing the concepts described in this Ph.D. thesis. Also, the implementation of walking stabilization control algorithms was made with OpenHRP platform and HRP-2 humanoid robot. The simulations and walking experiments showed favourable results not only in forward walking but also in turning and backwards walking gaits. It proved the applicability and reliability of designed open motion control architecture for humanoid robots. Finally, it should be noted that this Ph.D. thesis considers the motion control system of a humanoid robot as a whole, stresses the entire concept-design-implementation chain and develops basic guidelines for the design of open motion control architecture that can be easily implemented in other biped platforms