961 research outputs found

    Securing the Internet of Things Infrastructure - Standards and Techniques

    Get PDF
    The Internet of Things (IoT) infrastructure is a conglomerate of electronic devices interconnected through the Internet, with the purpose of providing prompt and effective service to end-users. Applications running on an IoT infrastructure generally handle sensitive information such as a patient’s healthcare record, the position of a logistic vehicle, or the temperature readings obtained through wireless sensor nodes deployed in a bushland. The protection of such information from unlawful disclosure, tampering or modification, as well as the unscathed presence of IoT devices, in adversarial environments, is of prime concern. In this paper, a descriptive analysis of the security of standards and technologies for protecting the IoT communication channel from adversarial threats is provided. In addition, two paradigms for securing the IoT infrastructure, namely, common key based and paired key based, are proposed

    Network layer access control for context-aware IPv6 applications

    Get PDF
    As part of the Lancaster GUIDE II project, we have developed a novel wireless access point protocol designed to support the development of next generation mobile context-aware applications in our local environs. Once deployed, this architecture will allow ordinary citizens secure, accountable and convenient access to a set of tailored applications including location, multimedia and context based services, and the public Internet. Our architecture utilises packet marking and network level packet filtering techniques within a modified Mobile IPv6 protocol stack to perform access control over a range of wireless network technologies. In this paper, we describe the rationale for, and components of, our architecture and contrast our approach with other state-of-the- art systems. The paper also contains details of our current implementation work, including preliminary performance measurements

    Securing route optimisation in NEMO

    Get PDF
    Third International Symposium on Modeling and Optimization in Mobile, Ad Hoc,and Wireless Networks. 4-6 April 2005. Riva del Garda, Trentino, ItalyThe network mobility (NEMO) basic support protocol enables mobile networks to change their point of attachment to the Internet, while preserving established sessions of the nodes within the mobile network. When only a nonnested mobile network is considered, the so-called triangle routing is the main problem that should be faced. In mobile IPv6, the route optimisation mechanism solves this problem, and the return routability mechanism aims to limit the security concerns originated because of the route optimisation. Nowadays return routability is considered a weak solution (i.e., based on strong assumptions). In this article we explore different approaches to route optimisation in NEMO and we devise how to adapt some of the terminal mobility solutions to a NEMO environment, where, as we propose, a delegation of signalling rights from the mobile network node to the mobile router is necessary.Publicad

    Secure and privacy-aware proxy mobile IPv6 protocol for vehicle-to-grid networks

    Get PDF
    Vehicle-to-Grid (V2G) networks have emerged as a new communication paradigm between Electric Vehicles (EVs) and the Smart Grid (SG). In order to ensure seamless communications between mobile EVs and the electric vehicle supply equipment, the support of ubiquitous and transparent mobile IP communications is essential in V2G networks. However, enabling mobile IP communications raises real concerns about the possibility of tracking the locations of connected EVs through their mobile IP addresses. In this paper, we employ certificate-less public key cryptography in synergy with the restrictive partially blind signature technique to construct a secure and privacy-aware proxy mobile IPv6 (SP-PMIPv6) protocol for V2G networks. SP-PMIPv6 achieves low authentication latency while protecting the identity and location privacy of the mobile EV. We evaluate the SP-PMIPv6 protocol in terms of its authentication overhead and the information-theoretic uncertainty derived by the mutual information metric to show the high level of achieved anonymity

    An integrated security Protocol communication scheme for Internet of Things using the Locator/ID Separation Protocol Network

    Get PDF
    Internet of Things communication is mainly based on a machine-to-machine pattern, where devices are globally addressed and identified. However, as the number of connected devices increase, the burdens on the network infrastructure increase as well. The major challenges are the size of the routing tables and the efficiency of the current routing protocols in the Internet backbone. To address these problems, an Internet Engineering Task Force (IETF) working group, along with the research group at Cisco, are still working on the Locator/ID Separation Protocol as a routing architecture that can provide new semantics for the IP addressing, to simplify routing operations and improve scalability in the future of the Internet such as the Internet of Things. Nonetheless, The Locator/ID Separation Protocol is still at an early stage of implementation and the security Protocol e.g. Internet Protocol Security (IPSec), in particular, is still in its infancy. Based on this, three scenarios were considered: Firstly, in the initial stage, each Locator/ID Separation Protocol-capable router needs to register with a Map-Server. This is known as the Registration Stage. Nevertheless, this stage is vulnerable to masquerading and content poisoning attacks. Secondly, the addresses resolving stage, in the Locator/ID Separation Protocol the Map Server (MS) accepts Map-Request from Ingress Tunnel Routers and Egress Tunnel Routers. These routers in trun look up the database and return the requested mapping to the endpoint user. However, this stage lacks data confidentiality and mutual authentication. Furthermore, the Locator/ID Separation Protocol limits the efficiency of the security protocol which works against redirecting the data or acting as fake routers. Thirdly, As a result of the vast increase in the different Internet of Things devices, the interconnected links between these devices increase vastly as well. Thus, the communication between the devices can be easily exposed to disclosures by attackers such as Man in the Middle Attacks (MitM) and Denial of Service Attack (DoS). This research provided a comprehensive study for Communication and Mobility in the Internet of Things as well as the taxonomy of different security protocols. It went on to investigate the security threats and vulnerabilities of Locator/ID Separation Protocol using X.805 framework standard. Then three Security protocols were provided to secure the exchanged transitions of communication in Locator/ID Separation Protocol. The first security protocol had been implemented to secure the Registration stage of Locator/ID separation using ID/Based cryptography method. The second security protocol was implemented to address the Resolving stage in the Locator/ID Separation Protocol between the Ingress Tunnel Router and Egress Tunnel Router using Challenge-Response authentication and Key Agreement technique. Where, the third security protocol had been proposed, analysed and evaluated for the Internet of Things communication devices. This protocol was based on the authentication and the group key agreement via using the El-Gamal concept. The developed protocols set an interface between each level of the phase to achieve security refinement architecture to Internet of Things based on Locator/ID Separation Protocol. These protocols were verified using Automated Validation Internet Security Protocol and Applications (AVISPA) which is a push button tool for the automated validation of security protocols and achieved results demonstrating that they do not have any security flaws. Finally, a performance analysis of security refinement protocol analysis and an evaluation were conducted using Contiki and Cooja simulation tool. The results of the performance analysis showed that the security refinement was highly scalable and the memory was quite efficient as it needed only 72 bytes of memory to store the keys in the Wireless Sensor Network (WSN) device

    Secure Authenticated Key Exchange for Enhancing the Security of Routing Protocol for Low-Power and Lossy Networks

    Get PDF
    The current Routing Protocol for Low Power and Lossy Networks (RPL) standard provides three security modes Unsecured Mode (UM), Preinstalled Secure Mode (PSM), and Authenticated Secure Mode (ASM). The PSM and ASM are designed to prevent external routing attacks and specific replay attacks through an optional replay protection mechanism. RPL\u27s PSM mode does not support key replacement when a malicious party obtains the key via differential cryptanalysis since it considers the key to be provided to nodes during the configuration of the network. This thesis presents an approach to implementing a secure authenticated key exchange mechanism for RPL, which ensures the integrity and authentication of the received key while providing tamper-proof data communication for IoTs in insecure circumstances. Moreover, the proposed approach allows the key to be updated regularly, preventing an attacker from obtaining the key through differential cryptanalysis. However, it is observed that the proposed solution imposes an increase in the cost of communication, computation, power consumption, and memory usage for the network nodes

    Exploring Data Security and Privacy Issues in Internet of Things Based on Five-Layer Architecture

    Get PDF
    Data Security and privacy is one of the serious issues in internet-based computing like cloud computing, mobile computing and Internet of Things (IoT). This security and privacy become manifolded in IoT because of diversified technologies and the interaction of Cyber Physical Systems (CPS) used in IoT. IoTs are being adapted in academics and in many organizations without fully protecting their assets and also without realizing that the traditional security solutions cannot be applied to IoT environment. This paper explores a comprehensive survey of IoT architectures, communication technologies and the security and privacy issues of them for a new researcher in IoT. This paper also suggests methods to thwart the security and privacy issues in the different layers of IoT architecture

    IPV6 BLOCKCHAIN DATA COMMUNICATION FOR UAV SWARM-INTELLIGENCE SYSTEMS BASED ON PEER-TO-PEER, PEER-TO-MANY, AND MANY-TO-PEER SCENARIOS

    Get PDF
    This thesis explores the use of blockchains along with the Internet Protocol version 6 (IPv6) data packet messages to support secure, high-performance, and scalable communication with an intelligent swarm of unmanned aerial vehicles (UAVs). For this thesis, we investigate the exchange of encrypted data packets for three scenarios, those being peer-to-peer, peer-to-many, and many-to-peer. We simulate the swarm’s behavior for each of these scenarios and vary the number of UAVs in a swarm over the simulation runs. The simulation-based results showed that for peer-to-peer scenarios and many-to-peer scenarios, there is no significant increase in latency even though in many-to-peer scenarios, the number of interacting nodes increases. In contrast, latency increases for the peer-to-many scenarios. Additional research needs to be performed to assess the security and scalability of the blockchain-IPv6 approach proposed in this thesis.Major, Indonesian NavyApproved for public release. Distribution is unlimited

    Practical privacy enhancing technologies for mobile systems

    Get PDF
    Mobile computers and handheld devices can be used today to connect to services available on the Internet. One of the predominant technologies in this respect for wireless Internet connection is the IEEE 802.11 family of WLAN standards. In many countries, WLAN access can be considered ubiquitous; there is a hotspot available almost anywhere. Unfortunately, the convenience provided by wireless Internet access has many privacy tradeoffs that are not obvious to mobile computer users. In this thesis, we investigate the lack of privacy of mobile computer users, and propose practical enhancements to increase the privacy of these users. We show how explicit information related to the users' identity leaks on all layers of the protocol stack. Even before an IP address is configured, the mobile computer may have already leaked their affiliation and other details to the local network as the WLAN interface openly broadcasts the networks that the user has visited. Free services that require authentication or provide personalization, such as online social networks, instant messengers, or web stores, all leak the user's identity. All this information, and much more, is available to a local passive observer using a mobile computer. In addition to a systematic analysis of privacy leaks, we have proposed four complementary privacy protection mechanisms. The main design guidelines for the mechanisms have been deployability and the introduction of minimal changes to user experience. More specifically, we mitigate privacy problems introduced by the standard WLAN access point discovery by designing a privacy-preserving access-point discovery protocol, show how a mobility management protocol can be used to protect privacy, and how leaks on all layers of the stack can be reduced by network location awareness and protocol stack virtualization. These practical technologies can be used in designing a privacy-preserving mobile system or can be retrofitted to current systems
    • …
    corecore