Novel Compression Algorithm Based on Sparse Sampling of 3-D Laser Range Scans

Cataloged from PDF version of article.Three-dimensional models of environments can be very useful and are commonly employed in areas such as robotics, art and architecture, facility management, water management, environmental/industrial/urban planning and documentation. A 3-D model is typically composed of a large number of measurements. When 3-D models of environments need to be transmitted or stored, they should be compressed efficiently to use the capacity of the communication channel or the storage medium effectively. We propose a novel compression technique based on compressive sampling applied to sparse representations of 3-D laser range measurements. The main issue here is finding highly sparse representations of the range measurements, since they do not have such representations in common domains, such as the frequency domain. To solve this problem, we develop a new algorithm to generate sparse innovations between consecutive range measurements acquired while the sensor moves. We compare the sparsity of our innovations with others generated by estimation and filtering. Furthermore, we compare the compression performance of our lossy compression method with widely used lossless and lossy compression techniques. The proposed method offers a small compression ratio and provides a reasonable compromise between the reconstruction error and processing time

Wearables for independent living in older adults: Gait and falls

Solutions are needed to satisfy care demands of older adults to live independently. Wearable technology (wearables) is one approach that offers a viable means for ubiquitous, sustainable and scalable monitoring of the health of older adults in habitual free-living environments. Gait has been presented as a relevant (bio)marker in ageing and pathological studies, with objective assessment achievable by inertial-based wearables. Commercial wearables have struggled to provide accurate analytics and have been limited by non-clinically oriented gait outcomes. Moreover, some research-grade wearables also fail to provide transparent functionality due to limitations in proprietary software. Innovation within this field is often sporadic, with large heterogeneity of wearable types and algorithms for gait outcomes leading to a lack of pragmatic use. This review provides a summary of the recent literature on gait assessment through the use of wearables, focusing on the need for an algorithm fusion approach to measurement, culminating in the ability to better detect and classify falls. A brief presentation of wearables in one pathological group is presented, identifying appropriate work for researchers in other cohorts to utilise. Suggestions for how this domain needs to progress are also summarised

A review of laser scanning for geological and geotechnical applications in underground mining

Laser scanning can provide timely assessments of mine sites despite adverse challenges in the operational environment. Although there are several published articles on laser scanning, there is a need to review them in the context of underground mining applications. To this end, a holistic review of laser scanning is presented including progress in 3D scanning systems, data capture/processing techniques and primary applications in underground mines. Laser scanning technology has advanced significantly in terms of mobility and mapping, but there are constraints in coherent and consistent data collection at certain mines due to feature deficiency, dynamics, and environmental influences such as dust and water. Studies suggest that laser scanning has matured over the years for change detection, clearance measurements and structure mapping applications. However, there is scope for improvements in lithology identification, surface parameter measurements, logistic tracking and autonomous navigation. Laser scanning has the potential to provide real-time solutions but the lack of infrastructure in underground mines for data transfer, geodetic networking and processing capacity remain limiting factors. Nevertheless, laser scanners are becoming an integral part of mine automation thanks to their affordability, accuracy and mobility, which should support their widespread usage in years to come

Design and application of microstrip leaky wave antennas for radar sensing

textThis dissertation investigates the application of the frequency-scanned beam of a microstrip leaky wave antenna (LWA) to track humans in the two-dimensional (2-D) range-azimuth plane. The history, operating principles and frequency-scanned properties of a microstrip LWA are first reviewed. The basic concept of using a microstrip LWA to track humans is verified by designing, building and testing a broadband microstrip LWA, developing the necessary processing algorithm, and collecting data using a vector network analyzer. A number of topics are then investigated to further advance the concept. First, the idea of combining the frequency-scanned antenna with a short-pulse ultra-wideband (UWB) radar is developed to realize a portable, real-time system for human tracking. The radar concept and the components of the system are discussed in detail. Line-of-sight and through-wall measurements of a human subject are carried out to demonstrate the performance. Second, a new LWA structure is proposed to achieve a narrower azimuth beam, which requires both a small leaky-wave attenuation constant and a long aperture. The transverse resonance method (TRM) is applied to analyze the proposed structure and the results are verified with measurements of a built prototype. Third, a new signal processing technique, compressive sensing, is applied to further improve the resolution in both the azimuth and down range dimensions. The technique is tested with simulation and measurement data and is shown to produce sharper target responses in both the down range and azimuth dimensions. Lastly, the radar cross-section (RCS) of a microstrip LWA is studied. The antenna mode scattering and structural mode scattering are modeled separately. A ray picture is provided to explain the observed time-domain features using the group delay of the leaky wave.Electrical and Computer Engineerin

Identifying High-Traffic Patterns in the Workplace With Radio Tomographic Imaging in 3D Wireless Sensor Networks

The rapid progress of wireless communication and embedded mircro-sensing electro-mechanical systems (MEMS) technologies has resulted in a growing confidence in the use of wireless sensor networks (WSNs) comprised of low-cost, low-power devices performing various monitoring tasks. Radio Tomographic Imaging (RTI) is a technology for localizing, tracking, and imaging device-free objects in a WSN using the change in received signal strength (RSS) of the radio links the object is obstructing. This thesis employs an experimental indoor three-dimensional (3-D) RTI network constructed of 80 wireless radios in a 100 square foot area. Experimental results are presented from a series of stationary target localization and target tracking experiments using one and two targets. Preliminary results demonstrate a 3-D RTI network can be effectively used to generate 3-D RSS-based images to extract target features such as size and height, and identify high-traffic patterns in the workplace by tracking asset movement

A novel compression algorithm based on sparse sampling of 3-D laser range scans

Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 2010.Thesis (Master's) -- Bilkent University, 2010.Includes bibliographical references leaves 68-75.3-D models of environments can be very useful and are commonly employed in areas such as robotics, art and architecture, environmental planning and documentation. A 3-D model is typically comprised of a large number of measurements. When 3-D models of environments need to be transmitted or stored, they should be compressed efficiently to use the capacity of the communication channel or the storage medium effectively. In this thesis, we propose a novel compression technique based on compressive sampling, applied to sparse representations of 3-D laser range measurements. The main issue here is finding highly sparse representations of the range measurements, since they do not have such representations in common domains, such as the frequency domain. To solve this problem, we develop a new algorithm to generate sparse innovations between consecutive range measurements acquired while the sensor moves. We compare the sparsity of our innovations with others generated by estimation and filtering. Furthermore, we compare the compression performance of our lossy compression method with widely used lossless and lossy compression techniques. The proposed method offers small compression ratio and provides a reasonable compromise between reconstruction error and processing time.Dobrucalı, OğuzcanM.S

Internationales Kolloquium über Anwendungen der Informatik und Mathematik in Architektur und Bauwesen : 20. bis 22.7. 2015, Bauhaus-Universität Weimar

The 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 20th till 22nd July 2015. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference. We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference

Script-based design toolkit for digitally fabricated concrete applied to terrain-responsive retaining wall design

The potential of digitally fabricated concrete (DFC) to produce terrain responsive designs has not been thoroughly investigated. Existing research indicates diverse benefits of DFC, such as the rapid fabrication of customized geometries. This research clarifies the advantages and design processes involved in creating site-specific DFC structures. Existing literature is analyzed to provide an overview of fabrication methods and their impacts and constraints on design. Parametric scripting is used to develop an interactive toolkit that integrates aesthetic, structural, and fabrication considerations into the design process. This toolkit specifically focuses on unreinforced retaining walls with interchangeable modules for terrain analysis, wall form generation, structural analysis, and fabrication analysis. The toolkit provides valuable feedback, such as identifying optimum wall proportions, and enables rapid design explorations. The findings affirm the value of exploratory design tools in managing fabrication complexities. Additionally, by recreating an existing amphitheater, the research indicates that DFC can create site-specific geometries that draw from the surrounding terrain

Vibration-based condition monitoring of wind turbine blades

Significant advances in wind turbine technology have increased the need for maintenance through condition monitoring. Indeed condition monitoring techniques exist and are deployed on wind turbines across Europe and America but are limited in scope. The sensors and monitoring devices used can be very expensive to deploy, further increasing costs within the wind industry. The work outlined in this thesis primarily investigates potential low-cost alternatives in the laboratory environment using vibration-based and modal testing techniques that could be used to monitor the condition of wind turbine blades. The main contributions of this thesis are: (1) the review of vibration-based condition monitoring for changing natural frequency identification; (2) the application of low-cost piezoelectric sounders with proof mass for sensing and measuring vibrations which provide information on structural health; (3) the application of low-cost miniature Micro-Electro-Mechanical Systems (MEMS) accelerometers for detecting and measuring defects in micro wind turbine blades in laboratory experiments; (4) development of an in-service calibration technique for arbitrarily positioned MEMS accelerometers on a medium-sized wind turbine blade. This allowed for easier aligning of coordinate systems and setting the accelerometer calibration values using samples taken over a period of time; (5) laboratory validation of low-cost modal analysis techniques on a medium-sized wind turbine blade; (6) mimicked ice-loading and laboratory measurement of vibration characteristics using MEMS accelerometers on a real wind turbine blade and (7) conceptualisation and systems design of a novel embedded monitoring system that can be installed at manufacture, is self-powered, has signal processing capability and can operate remotely. By applying the conclusions of this work, which demonstrates that low-cost consumer electronics specifically MEMS accelerometers can measure the vibration characteristics of wind turbine blades, the implementation and deployment of these devices can contribute towards reducing the rising costs of condition monitoring within the wind industry